I've stayed pretty quiet about this, but as an early and enthusiastic Framework supporter, I cannot recommend them to anyone.
I bought the Framework 13 before launch, and received a machine from the first batch. I later bought their main board upgrade kit and their screen upgrade kit and I did a full upgrade on the machine and rebuilt it. The reason I could justify that was that I would take the old main board and slip it into their Cooler Master case and use it as a spare machine.
But there was a bug in the Intel chip they used in that main board that prevented it from booting properly inside of the Cooler Master case, and going back and forth with support, what they wanted me to do was disassemble my other computers to troubleshoot the one that should have just worked. They didn't offer a replacement. They didn't allow me to send it in to have them fix it. When I explained that I didn't want to disassemble my working machines to fix my broken machine, they stopped replying to me.
This, coupled with the horrendous battery issues in the first version of the Framework 13, led me to conclude another purchase from them would be a big mistake.
Still happy with all six of my System76 purchases.
Your mainboard fit in the Coolermaster case? Mine had a defect where the case's pegs were too large for the mainboard to fit over them. Framework sent a replacement, same issue. Framework sent a second replacement which they claimed was "white glove service", meaning they would have someone verify the quality of the part before shipping it. Same issue. I returned them all for a refund. Several others on the forum had the same issue.
I also went through 3 hinges on my 1st gen Framework 13 laptop, because the hinges were so weak they couldn't hold up the screen under its own weight.
My thread cataloguing my issues with the Framework 13 got so long, the moderators closed it.
My trackpad stopped detecting clicks. So did the replacement that I bought because it was out of warranty.
One of the buttons for the expansion card removal fell off. Framework replaced that under warranty.
The speakers would cause the keyboard to rattle until I took off the shift keys and adjusted the stabilizers.
I really wanted to believe in and support Framework. I support their mission. But man, everything I've gotten from them has been junk.
> Still happy with all six of my System76 purchases.
I, on the other hand, wish I'd gone with a Framework instead of System76.
My System76 devices keep breaking and because they're a few years old already, obtaining replacement parts is a challenge. And forget about upgrading them or giving a laptop a second life as a desktop.
Big corporations upgrade their computer fleets on a regular cadence.
Their old machines can be picked up from the referb shops for from as little as 10% to 20% off their original retail price.
Over the years I’ve had multiple Dell and HP laptops and mini-desktop machines that have been in excellent condition when I got them, and each lasted me years.
A friend of mine and I used to swear by old Lenovo devices. Back then, those things were absolute tanks. He even took them with him to Afghanistan—not even sand or dust could harm them. All that needed replacing after the trip were some parts of the cooling fans and the keyboard.
While it is nice that we have more options than in the past for portable linux poweruser laptops nowadays, i do still wish they were better
Framework (i personally love mine, but I haven't had to deal with support yet)
Lenovo (I have an X1C for work; it's a great machine, but very expensive, not repairable, and I had significant issues up to 6 months after the model I had was released with the wireless drivers on LTS)
System76 (expensive, feels subpar)
Dell (lolno never again)
I wish apple provided official support for asahi, but I don't see that happening anytime soon.
> I wish apple provided official support for asahi, but I don't see that happening anytime soon.
Even some level of unofficial support might be a game changer. It doesn't seem crazy, except in the cultural sense: modern Apple views their stuff as the supreme ultimate and for them, interoperating with inferior technologies is kept to a minimum. They don't even understand the concept.
Financially, it could be a win for them in a way that the support for running MacOS on clone hardware never was back in the day.
Here's my perspective because I recently became a framework owner of the 13 pro. Before then I'd bought a Dell XPS that came to me broken out of the box (keyboard was completely fubar).
The 13 pro has been a very good machine for me. Excellent battery life, good performance, just smooth sailing. My one criticism is the speakers are crap. I know they improved them, so I have to imagine the original 13 speakers were even worse.
The reason I grabbed the 13 pro was because framework featured an upgrade path from the original 13 to a 13 pro by swapping out relevant parts. That's what sold me.
>The reason I grabbed the 13 pro was because framework featured an upgrade path from the original 13 to a 13 pro by swapping out relevant parts. That's what sold me.
Note that the advertised upgrade path is not available yet, and won't be available any time soon: there's a reasonable guarantee that no upgrade parts will be available for purchase until at least February 2027, and quite possibly long after that.
Not particularly fair to blame framework for the global supply shortage. You can perhaps complain that they're prioritizing new laptops over upgrades, but I'd argue that's a defensable business decision under current market conditions.
I mean, yes, but that's because they're still fulfilling preorders! You literally can't buy a 13 Pro off the shelf, either. I think you can make the case that they should do parts-based preorders alongside full-system preorders, but I understand the logistics for why that's awkward.
I swear Dell have two factories. In one factory they build their regular laptops. These are shit. In the other factory, thats where they build you a laptop if you spent the addition $600 on the 5 year, next-day, on-site service.
Just to counter-anecdata, I bought a Thinkpad for use with Ubuntu and it put me through hours of weird bugs. I can't comment on Framework in specific but just a reminder that there are a ton of experiences out there for every widely-used product.
While think-pads usually just work out of the box with most linux stuff (dedicated gpus in laptops being the exception) you really shouldnt choose Ubuntu / Debian for a new machine. Latest hardware benefits a lot from a rolling release distro that has all the latest drivers and fixes. After a year or two ubuntu will likely run fine.
Also I realize how cliche it is to show up on the internet in a linux discussion to you you are holding it wrong aha.
I myself prefer the track point so thinkpads are basically all I have left for that and I know loads and loads of people don't use it so it is basically just branding at this point.
I hope you never have to deal with Lenovo support. If you do it's worth paying extra to have a technician come to you, Lenovo's mail-in support centres have terrible quality control.
I have both thinkpad t480 and framework 13 - very happy customer of both.
I think there's always extremes to stories like these and I've definitely had my share with thinkpad from dead pixels to month long support correspondences.
You sweet summer child. I was happy with my Thinkpad too ... once.
Then I tried to close the laptop, and my thumb touched the screen. NOT hard, very gently, but somehow it was enough to puncture the screen, and it stopped working shortly thereafter.
This seemed like an obvious defect: I have used laptops for decades, closed them literally thousands of times, and never punctured the screen in the process. Lenovo refused to fix it.
I went to a 3rd party (U Break It We Fix It or something like that), which was a separate nightmare, but after a month they gave up.
So I paid for a Lenovo warranty, even though I'd have to wait like two months before I could send the laptop in. After two months I finally did and EVEN WITH A WARRANTY LENOVO REFUSED TO FIX IT. They literally wanted to charge me about 90% of the original purchase price, with the warranty.
So, I guess they have multiple warranty levels, and I picked the wrong one but FUCK LENOVO for selling me a defective screen that broke the moment the lightest pressure was appleid and then refusing to fix it.
honestly, for me it's always been between a thinkpad and an xps... I have been tempted by system76 but right now I think they are massively overpriced, so I just don't think I'd go there any time soon...
> tempted by system76 but right now I think they are massively overpriced
Is there a computer that's not overpriced nowadays? With the global chips crisis I think nobody knows how much a computer should cost anymore. The manufacturers are totally taking advantage of it and slapping any price they want, and will continue to do so for as long as they are able to sell.
If you want to save some money look for refurbished deals. I got a newer model direct from Lenovo off eBay at around 30% MSRP. I wouldn't be able to tell it's not new.
I have the new XPS 14, other than the webcam (maybe there is a fix now, I haven't investigated), it has been great with Ubuntu 26.04.
Note: I'm on my second XPS 14 because the first one had a BIOS error within the return period, so I returned it rather than gambling, and bought a second one which has been fine.
My XPS 15 had 3 battery failures. 2 Under warranty.
After the 3rd failure I tried to find a third party replacement (because of the Dell track record and the fact that Dell was sold out of the battery at that time...) only to find out Dell has battery DRM and won't charge non-OEM batteries. Basically the machine would boot and stay on until the initial charge died- super cool.
My MacBooks and ThinkPads are workhorses... If given a Dell I would sell it to fund a used ThinkPad.
I’m a long time user of IBM and then Lenovo laptops going back decades. Just wait until you find out how Lenovo machines have a WiFi card whitelist so you can’t install whatever model you want. Or that on AMD machines they use PSB which locks the CPU to a Lenovo board, and if you don’t disable it and install a new CPU you are one Enter key away from locking the new one too, after they present you with a misleading “want to secure your CPU” message. And these are just the issues that are the result of conscious hostile decisions. Apple has the same problems with user hostile decisions and 0 repairability.
You also have less intentional issues. A lot of their X1 line generations were terrible, problematic screens, poor cooling, battery issues, BIOS issues, etc. Not just on 1 or 2 devices, but problems that I could see on batches of thousands or more. Apple devices were for years infamous for screen, GPU, keyboard issues, cooling issues (the last Intel models were something special, to put the last IBM models to shame) and so on.
Nobody collects full reliability statistics on the big manufacturers because the data isn’t available so you have to hope that when you buy from a line of laptops you didn’t land on the problematic one.
In the past few years I had better luck with Dell than Lenovo (again, talking large scale, for my use I stuck with some older Lenovo models).
I’m a bit soured with Lenovo ATM after buying a desktop to scavenge the PRO line APU (for the ECC support), wondering for a hot second why it’s so much cheaper than an identical HP, only to find out the CPU can’t be used on any non Lenovo system. Bought another equivalent HP which runs cooler and consistently moderately faster.
> Still happy with all six of my System76 purchases.
Conversely, I'm a bit iffy on System 76. The main reason being, the build quality of the physical device. From a pure computing viewpoint it's fine. Maybe better than fine. But the case is really falling apart. Lots of cracks, and broken fan slats, and such-like. I mean, it still works and is usable, but it just doesn't feel like a high-quality build, so I'm not sure I'd buy from them again.
Not an excuse for them, but you bought the very first product from a brand new company. They'd probably do better today.
For example, I bought the second and fourth(?) laptop they put out and am very happy with them. One issue was there was a problem with the power cable jacket opening up. Suppose support could be a bit faster but they sent a new one after I mailed a photo in.
Let it be a warning to everyone else, early product/early company, expect adventures. You're going to have to help them out, even to make them do the right thing. Believe they're capable of learning however, and don't think this "never again" rhetoric is helpful in that case.
Nah, too much competition to not get it right the first time. Being ghosted by support is especially egregious from a company at any age. Life's too short to care about whether they've fixed their shit.
(And if they ghosted OP for a good reason, then they've only lost one customer, and it was intentional.)
… or your preferred retailer. This story about Amazon just never gets old. Back in 2010—I believe it was—I ordered a 27-inch iMac. Over time, dust accumulated inside the display, so 18 months after buying, I filed a claim with Amazon. To my complete surprise, they sent me a shipping label, and just three days later, I had received a full refund of the purchase price.
What the heck... I think I had the same issue as you a few months ago, 11th gen board, very early but maybe not pre-launch, and swapping in a $10 battery off Digikey fixed the "I need my AC adapter for it to boot at all" permanently.
And then I just yesterday did the Cooler Master swap, new mainboard into the laptop chassis, old mainboard as a server, and it went without a hitch, both machines running just fine.
I also don't know the battery issues you're referring to, I don't remember dealing with anything super horrendous in the 5 years I've been using this laptop, but my battery is currently in good shape, probably 6-8 hours on a full charge, which is impressive for a 5yo battery.
Part of my troubleshooting was buying a new battery so that I could swap it in, and I didn't have any luck with that direction, which is why I ended up contacting support.
The battery issues I'm referring to are that when I put the laptop into standby, it'll go from 100 to 0 in about 15 hours. I don't think it's that interesting of a bug since so many people have been discussing this for so long, but I did note that the Framework 13 suffered from that as well.
Modern Intel hardware has an active standby on windows that it goes into when you close the lid with the charger connected. If you unplug the charger first, and then put it to sleep then it lasts way longer.
This is not a Framework specific issue though, at some point dell had a service advisory out for some of their machines, to not let it suspend with the lid closed, as it will cook the screen! My 10th/11th gen Intel HP would be warm to the touch while it's on standby.
Yep, I run Linux across everything, and you're correct that this is not isolated to just the Framework. It just ended up biting me harder with that particular laptop than any of my others.
> going back and forth with support, what they wanted me to do was disassemble my other computers to troubleshoot the one that should have just worked. They didn't offer a replacement. They didn't allow me to send it in to have them fix it. When I explained that I didn't want to disassemble my working machines to fix my broken machine, they stopped replying to me.
That completely tracks. I've found their support to be extremely lame at best.
You can literally see exactly what I bought and when I bought it but you still need me to crack open the case to get the serial number on the mainboard whose widespread, notorious defect you aren't going to repair, but instead offer a lame workaround part for me to install myself instead?
You need a recorded video of the lid of my laptop gradually sagging downward while I type before you can send replacement hinges under warranty, even though the defect is common and why the fuck would I want to scam you out of little fucking hinges that I need to install myself anyway ytvutyf023f498020923r8
Maybe it's better under Windows 11, I'm not sure. I put Windows 10 on mine in 2024 and it was a terrible experience - sleep didn't work when closing the lid, would die on startup if not plugged into wall power (though after boot, I could remove) being the two most annoying. I wiped W10 and put Debian on it and then everything worked great (sleep on lid close, boot on battery, etc)
I did basically the same thing and I've had problems getting the main board to boot reliably. I've not needed it so haven't troubleshooted further. Discouraged it might be a show stopping bug. :(
Yeah I had the battery problem, had to get a new battery because the first one blew up like a pop tart and I now permanently keep the laptop at 60% charge tops. Are you saying my first cooked battery was not actually my fault ?
I spent about 15 hours troubleshooting this problem. What I refused to do was disassemble another working computer so that I could troubleshoot the broken one.
The bug is in the handling of power cycling RTC battery. Basically, if you leave the main board unplugged for weeks and then try to power it up, it'll refuse to boot, and there is a complex set of LED diagnostic codes that they had asked me to take a video of and send to them, which I did. They had asked me to pull the real-time clock batteries out of other machines and insert them into the main board as part of the troubleshooting and I said I didn't want to do that.
They didn't go out of their way to help me at all, in fact they did nothing. Engineering teams that choose components are responsible for those choices. Framework neglected to take any responsibility whatsoever.
If the other OEM had chosen that exact same chipset, and if that other OEM neglected to do anything to fix it, then yes, my experience would be the same.
But, during this period I've been buying computers steadily from System76, and they have been incredibly supportive when I came to them with an issue (to be fair, I've only ever had to work with System76 support once, but it was a very positive experience).
So no, I don't think it's fair to assume that I would have had the same experience with any OEM. Different OEMs could choose different chipsets, and they could choose to be more supportive.
They specifically advertised the upgrade kits as an enhancement for your laptop with the ability to reuse the main board in another case that they (Framework) partnered with Cooler Master to create. They even advertised this use case, which I thought was appealing. The problem was it was, to some degree, false advertising.
The key value proposition of the Framework laptop was that it was modular and could be rebuilt as needed with different components so we could maximize reuse. All I'm saying is that when I tried to actually fulfill that promise, I came up empty.
We tend to think like so in the tech industry. Imagine it like this. You drive a car with a faulty ZF gearbox. Would you like to sort things out with the supplier or your local car dealer?
This culture of "it's someone else's problem" needs to die. If you sell someone something, you are responsible for it working as you sold it. Even if behind the scenes you're a customer dealing with Intel failing to fulfil the specs that they sold you.
Why would I as a customer care about their supplier? If you buy a car and the motor the car brand bought is faulty, do you ask the car brand or the motor supplier to fix it?
You're all over this thread making assumptions that are not true. The Cooler Master case is advertised by Framework (they are strategic partners) and they advertised that this specific configuration is supported, and they continue to do so today.
You're leaving out facts that the average person wouldn't know - I don't own a Framework, so I had no idea they made Cooler Master cases.
It still seems odd to me that if this is a common problem and not a random defect, that everyone who bought it should have the same problem and they would get enough feedback to change their compatibility list.
A thought just occured to me: how do you know it's a bug if you didn't bother troubleshooting it with the help from the company?
they didn't buy a chip from intel, they bought a computer from framework, and the support to make sure it works is frameworks, not intel's. framework can deal with intel.
imagine you buy a car and the electronics stop working and the manufacturer says "hey your problem is with bosch, go bug them" - you didn't buy anything from bosch, you bought a car and dealing with defective bosch parts is the manufacturer/dealer's problem, not yours.
No, the Cooler Master case is a product sold by Framework and designed exactly for the purpose of housing a Framework motherboard. It's more like if I took the engine out of my car and put it into a rolling shell that the same car company sold me specifically to put my engine into.
I avoid Intel wherever possible now, which thankfully, is almost everywhere now. Their insanely broken power management in Skylake kept Surface Pro 4 users without any ability to sleep and wake (kinda important for laptops!) for TWO YEARS.
Microsoft, to their credit here, really tried their best to patch around Intel's fundamental brokenness, but it literally did take them years to bodge up a solution to make it sort of work like it was supposed to. I only stuck it out becasue I really needed pen and touch capability.
Intel is dead to me now. And in today's AI world, Intel is irrelevant, anyway.
I’m digging into this with the team, along with comments in this post. Longevity has to include a streamlined and effective support experience in addition to the hardware being repairable.
There are several changes we made earlier this year to drastically shorten the number of back-and-forths to issuing replacement parts when submitting a support request, and we’re working to streamline that further. We’re also improving the RMA->quality->engineering pipeline to make sure we capture learnings and make fixes from field failures.
> Your customer base are above average technical people, yet you insist on treating them like clueless noobs.
I have no experiences or relations with Framework whatsoever nor I intend to have, but having seen some support exchanges about products with supposedly above average technical customer base in the past I'd be willing to side with them on this particular point.
I'll just offer that I bought a Framework 13 ~4 months ago to replace a Lenovo laptop that had been flaky from the jump. Lenovo support was frustrating and useless helpping with the USB-C ports constantly dropping connectivity (I suspect a design flaw and overheating nearby) on the still in warranty laptop. So, in my n=1, the big guys support isn't great either.
So far, I'm happy with my Framework purchase... but haven't needed any support yet.
Lenovo support is atrocious. 3 months to get a laptop fixed isn't great, but it took Lenovo over 1 year to fix my broken on arrival thinkpad. 80+ hours (conservative estimate) of talking to their support staff over the phone, and many times shipping the machine to them, only to have it come back with the same issue or a new issue. Honestly with the time it took to get the laptop fixed it would've made more sense just to throw the thing in the trash and do some extra contact work.
I can't imagine how frustrating the experience would've been had I not had another machine to use for work.
Also their business practices seem extremely sketchy to me, one of the first things I asked when it arrived broken was if I could return it for a refund. They refused claiming that the return window had expired, and the window does not start when you receive the item, but instead when you order it (it took ~4 months after order to ship to me).
It was a real learning experience. Now I record every support conversation I have.
My hunch is that they are not big enough to support such an operation. Just my hunch. I have seen many similar posts on reddit and HN and I'm very hesitant to purchase one with my own money. I wish some company can pay me :)
I have been a part of the ThinkPad cult for 20 years now and the last model I bought (2022 P15 Gen2) has worked but is so far below the standards I am used to that I will likely not buy another. Framework was going to be my next choice but I have also seen these horror stories from time to time that don't give me a warm fuzzy, spend a month's income, feeling.
The state of hardware is about as bad as the state of software lately.
I'm wondering what other choices do we have. I tried a few Dell refurbished laptops, and none of them is particularly good -- and they both broke down after 1-2 years. Now they also hiked up the price point (almost 800-1000 CAD for one used laptop) so it doesn't make sense to subscribe to something for 400-500 CAD per year.
I do have a T470S which works perfectly well, a Macbook Pro M1 16GB and hopefully soon a Mcbook Pro 2019 i7 64GB, so I'll do fine.
I was Thinkpad cult until I got the first AMD version of the framework 13 and just another anecdotal data point, it's been flawless. I've done two screen upgrades, one main board upgrade, and one keyboard replacement because I wanted a cool unlabeled transparent keyboard. I'm on the waiting list for the 13 pro chassis set as well.
I have interacted with support before when a usbc thing I got was bunk. Two emails, and then they sent a replacement. Support might be better in Taiwan though, for all I know. Certainly shipping is fast here...
I am not affiliated in any way with framework (and I don’t even own framework hardware) but i’d like to offer a different perspective: support is an expensive part of the business, with an unpredictable volume of work, for which hiring can often be “hard”.
If you need to have strong technical people in support, you’ll be overspending in salaries for people that will likely move fairly soon to better positions (a lot of tech people started in support, i did myself).
If otherwise you don’t spend enough you get to keep the books in check but then you have support people that are not very technical and mostly read from a script.
And there are a ton of other things that happen behind the curtains as well.
I have extensive support experience, you're right, support is not easy, that said, there is a very easy win: hire enthusiastic support staff that are overqualified. Customers don't like slow support but slow support is forgivable if it is good support. Framework's support as described in the post is a disaster, the worst type of support. Bad support compounds: if your support agents are doing the bare minimum to move a ticket along, they're pissing off customers and missing insight that would be valuable to the teams responsible. A customer support team of 2 technical people will deliver more for the company than a customer support team of 10 untrained people.
The quick fix for any company in this situation is to require that technical people across the company take responsibility for customer support. Of course, they don't want to, hardware designers and software engineers can't imagine anything worse, but they've got to be exposed to how real customers are experiencing their work to have any hope of doing a good job. The exposure can be direct (in a crisis) or indirect (through technical support staff relaying).
If I were the Framework CEO, I'd be taking over customer support myself. A nightmare, but necessary to understand why their support is so bad.
I have been a chief developer of a large service (think millions of daily users) and I had a habit of opening the support inbox and replying to users. In a typical evening hour I would clear the inbox and successfully resolve a mountain of tickets. Not to mention the important insight I was collecting from real users' feedback and real bug reports.
And this is how it should be: an enthusiastic developer can churn support tickets in their free time much much faster than dedicated support staff does full time.
> The quick fix for any company in this situation is to require that technical people across the company take responsibility for customer support.
I like your idea but I can also imagine that quite a few technical people will not have the necessary communication skills for being in customer support. They will need additional training if you want to unleash them onto your paying customers.
In the same way a bad medical diagnosis makes things harder later on, or bad legal advice, etc
But especially in the "silly" cases, this is extra disappointing. The case in TFA is not "you're holding it wrong" or "weird technical bug that happens once in a very while", it's a very clear issue of "should do A and it doesn't"
Since you seem to have experience with this, the principle that I've seen work "best" in my own limited experience (and I wonder how it matches with your experience) is to keep the barriers between support and product development as low as possible:
1. keep the company as small as possible in general (which lowers all communication barriers everywhere, and helps with cash flow—fewer salaries, smaller office, low overhead)
2. Early on, have the same engineers doing product development and support. Later, have heavy, regular communication between the teams (including managers and senior ICs on both sides. Maybe rotating the managers would work? I don't know. Once you have more than one level, I don't know anymore, but maybe do the same thing with directors and senior managers?). This hurts growth, because you're understaffed to begin with, and you're impeding the staff you have by giving them tons of unplanned support work. But IME it means that product development is happening at the right level of abstraction.
If the product you're building requires big company support (or training or product development), and the revenue it brings in can only support a small company, then you should change what you're building. It's very hard to change what you're building if the company is very big.
So if, for example, support is boiling because your product is flaky, and engineering is too small and too busy to fix all the problems at a reasonable pace, you probably have a design problem(s) and expanding will make it more entrenched. Instead, you should simplify the product. Then expand (with an understanding of the real costs of different parts of your vision), and repeat.
It being hard is no excuse for not doing it. Building long bridges is hard, doing surgery is hard. Creating a new computer company is hard. That doesn’t excuse you having a support organization that costs the company’s reputation and future viability.
A company can get away with paying their support team entry-level salaries by fostering a healthy (and dare I even say fun?) workplace culture.
One of my early jobs was working in support for a web-hosting company just after the dot-com boom. They did a lot of things wrong (or at least cheap), but they also got a lot right, especially their support teams. They understood that customer service is the face and reputation of any business, not just a cost center.
They provided good training, fostered a positive atmosphere in a variety of ways (important when your job is a constant stream of unhappy customers), and supplied a lot of free food and company outings. I wouldn't say it was an _awesome_ job, but it was a good one, especially for where I was at the time. There certainly are parts of it I miss. (Mainly some of the unique characters I got to work with. It feels like everyone in modern tech companies all have the same personality.)
apple do a reasonably good job of paying support staff well enough that the support quality in person is decent.
This is the primary reason i buy used iphones - someone else pays the apple tax, i take the phone to apple and for a reasonable price, i get a new battery and i keep the value of the phone and battery for around six years. No other phone manufacturer offers that proposition.
I also chat with the apple staff while i wait and they are paid decent wages. I certainly think they deserve higher wages, but their wages are not bottom of the barrel. The strongest evidence is that staff turnover is relatively low.
I have a counterexample, from a small company, Gong galaxy. The support is genuinely helpful, have more knowledge than anybody should expect, and is fast to respond. Even when the mistake was clearly mine they replaced the equipment I broke, and tbh, I felt like talking to the sales team each time I contacted support (and once I thought I talked to a fiberglas/epoxy expert). And I know it's not only me, a friend has had the exact same experience.
I wonder if it's because it is a small enough team that they have the correct person respond to support calls each time, but it was the best experience I ever had.
With my support experience there was a lot of inefficiency in communications. They could save a lot of time with a form that asks for some standard information.
Also I had to make videos and photos and then email them which couldn't handle large files so I had to organise my own hosting and share links.
Basically they don't seem to have thought it through yet
Not only is support not easy, it is increasingly expensive.
Products are priced and launched with an initial BOM cost and anticipated labor cost for repairs. Prior to the AI buyout, service and support was already running into real issues with the costs of labor increasing very quickly. Now, the cost of service parts has also skyrocketed. This means that the initial overhead in the cost of the machine is no longer able to cover the intended dollars put aside for repair.
This is not just happening in computers. This is everywhere. Support and service were struggling everywhere coming out of COVID, prior to the jump in component costs due to labor. Now it is a bloodbath as logistics costs have also jumped due to fuel costs. Add into this that the vast majority of manufacturers build in lower-cost labor environments, but repair generally happens locally near customers. In these situations they are facing repairs that can cost more than building a new machine.
The future of support is going to be grim for the coming years.
From my arm chair, I wonder if they should have just asked him to return the broken laptop and send him a new one. This way, one of their experts can have a high bandwidth experience with device in a lab.
I had a similar issue with Apple once and that was their recommendation (as it was within their return window).
Apologies if you already know all this, but perhaps you've heard of the example of eMachines, an initially much-maligned vendor of "free" PCs in the dotcom bubble. Their product was janky and it showed, but they eventually turned it around. A big part of it was that they chose to colocate their support folks with their engineering team (I read somewhere they'd have support peeps sitting right next to engineers) and made a rigorous, concerted effort to turn every support call into a product improvement where practical. Their products just got better and better and their reputation recovered.
Perhaps that approach isn't practical today, but maybe there are some useful threads in there to pull on.
This is true of most jobs. That doesn't mean I expect companies where the job is required to routinely fail at them, mostly because they are unwilling to invest proper resources.
Framework is not unique in having shitty support. It is an absolute epidemic, which is why companies are able to get away with it. But the fact that almost everyone sucks at it doesn't mean we shouldn't call the problem out loudly when we see it.
Framework is still a very niche product. The average Joe likely wouldn't even consider it in their top 10 brand, even if they have heard of it. The SW engineer who is into framework at this stage of the company's lifecycle is definitely more likely than not an above average engineer.
Don't let them fool you. Early 2026 I bought a 4100€ laptop from them, returned it because I didn't think it was worth the price, and they scammed me telling that I didn't return every component. First telling me RAM was missing, afterwards telling me "well there is some RAM but not all of it", without any sort of proof. Complained online, mods telling me in public "don't worry I will contact the head of support" just like nrp did, just to receive a copy pasted mail from them.
Me and my GF filed a report with every proof to mastercard for a chargeback (that framework contested), but after Mastercard investigation, they ruled in our favor.
i'm kind of surprised to see this comment. not because "oh wow the ceo is in the comments", but because your support is so difficult that it's hard to imagine it not being intentional.
I bought a chasis kit recently and the touchpad is faulty, or acting faulty ( physically getting stuck depressed), and the amount of back and forth for the serial number of part X, then Y, then firmware of Z, etc.. maybe there's a technical reason for that but i just considered myself beat into submission and gave up.
after mainboard upgrades, touchscreen upgrades, and various other upgrades over the years and being excited about framework, it's weird to have all of my enthusiasm get derailed over support for a touchpad.
I don't understand why this isn't 'alright, pack it up and ship it and we'll send you a replacement'.
This should be a case of the engineering team getting the faulty device for debug (and ideally getting all the relevant information so they can do the work with some semblance of parity with the customer's setup) -- and the other half is the customer gets a functional piece of hardware to swap in.
If Framework is worried about sending out hardware before receiving hardware, the policy is a simple one; when we get the hardware, we'll ship your replacement.
---
and the amount of back and forth for the serial number of part X, then Y, then firmware of Z, etc.. maybe there's a technical reason for that but i just considered myself beat into submission and gave up.
This is the standard 'debug over the phone' thing and engineers will do this while collecting information to try and recreate the problem you're having. It may be because the engineers are too close to the process? If you think about it, the RMA process is actually a sales process. You're essentially selling an already sold user on continuing to be a user.
> I don't understand why this isn't 'alright, pack it up and ship it and we'll send you a replacement'.
Oh no. It should be "we have sent you a replacement - once it's installed and confirmed working, pack up the broken one and send us in the provided box with the provided pre-paid return label".
Best thing about Dell for example, with an enterprise contract you can overnight parts based on a machines service tag and they come with a prepaid return label, super easy and simple.
I'm fine with a middle ground - either run the support questions/tests and get the prepaid advance RMA, or say "I know what the fucking problem is, give me the advance RMA and bill me for shipping if the returned part is fine and I'm a dumbass."
In reality many people will NOT take the second option, but will be happy it was there, and the company probably never bothers billing for incorrect advance RMAs.
Exactly. Framework prides itself on its repairability, yet their support acts like any other PC manufacturer. If your stuff is so repairable, why can't I get billed the parts I know I need, and I can prove to you that this was necessary so you don't bill me?
I had exactly the same experience with the Desktop. PSU has a design fault, new units still ship with that fault a year after release, and customer support still asks for proof, offer all sorts of potential fixes to try and finally a full one hour procedure for a replacement of the part by another faulty one. Meanwhile a third party managed to design a better PSU for their product. It's astonishing. [0]
First, I think it's dumb that Framework stuck a semi-generic PSU in the Desktop with a tiny little buzzy fan and no way to control it _while_ marketing the machine as nearly silent. Poor design and bad marketing.
Buuuut, I'll argue against the point that these are faulty units. Everyone gets the same PSU in their Desktop. That thread (and many others like it) are full of people claiming that their _specific_ PSU fan is loud and defective and demanding that Framework should replace it. And then are surprised when the replacement sounds exactly like the old one.
I bought the Framework Desktop anyway after reading these threads, and after owning it for almost a year, I have to say that the fan noise doesn't actually bother me. I have had laptops and desktops with FAR noisier fans that ran either constantly or intermittently so I guess I'm just thankful that modern PCs don't sound like vacuum cleaners anymore.
Why ask for this on a public forum? Every week hold a meeting with support team lead and go through 10-20 tickets they flag as problematic. Recurring issues, tickets with a lot of back and forth, dissatisfied customers - anything.
Then take action internally.
You need to touch some ground, your work doesn't end after the sale is made.
> I bought a chasis kit recently and the touchpad is faulty, or acting faulty ( physically getting stuck depressed), and the amount of back and forth for the serial number of part X, then Y, then firmware of Z, etc.. maybe there's a technical reason for that but i just considered myself beat into submission and gave up.
I've been there with Framework. It's incredibly frustrating and I wouldn't even consider buying another one of their products until they've conspicuously turned this around over an exteneded period of time.
I tried to resolve this through support, asked for a manager, suggested a refund or replacement and ended warning I’d go public when I ran out of options to break out of the support loop hell. I didn’t anticipate this would hit HN so I feel bad for you and will unlink shortly to stop the shitstorm.
If you genuinely care about customers, fix the problem: keep the laptop we sent you and send a replacement unit which has been properly tested, basically do what anyone would expect in a similar situation.
I will still not buy new hardware nor recommend you, but at least you will have shown that you fix your mistakes and I’ll publicly acknowledge it in good faith.
FWIW I am a happy Framework owner, but I have one suggestion: I think you should stop shipping disassembled laptops. Instead you should ship them assembled and QA-ed, including the Linux ones, which currently are DIY-kit-only.
It's a bit fun the first time to assemble from scratch, but it's annoying the second time, and it would mean you know the laptops actually work when they get sent out! The article's issue for example would've been caught if someone had assembled the laptop and powered it on, and not then disassembled it again for the experience of assembling a DIY laptop kit. My understanding is that this is actually the process Framework uses — that is, assembling and then disassembling — and I can't imagine disassembling has a zero percent fault rate, nor does asking the customer to re-assemble.
Your laptops are really nice and I want you to succeed. There's a reason everyone else ships assembled laptops though, and I think you should do it too. It wouldn't harm repairability, or compromise your principles: I think it would just reduce churn and support tickets from broken parts and laptops, and reduce customer frustration.
The treatment of the article author is the same treatment that I experienced with my launch Framework. Framework customer support is absolutely horrid and I had to fight for a month to get the input cover replaced along with ridiculous steps to prove that it was faulty. This was back in 2022. Nothing has changed in four years.
Editing this to add on: A firmware update bricked the TPM functionality somehow. :D
Unfortunately this is the nth story that shares the same thing.
It feels like it's done on purpose and it works. I gave up on my faulty screen replacement as the back and forth became so long and the warranty expired.
I love everything about framework as a company, but the approach to customer support has left a very sour taste.
To me, how a company handles returns and customers who are having difficulty says far more about that company than whether their products are cool or their technology is advanced. The only companies I have sworn off ever doing business with, they all had terrible, hostile, or indifferent customer support.
a lot of negativity in the comments but i just want to say thank you for your efforts and your willingness to listen to the community. i have no doubt running a company like framework is extremely hard. i hope you guys continue to build great products for many decades to come.
I'm not affiliated, but I think it's important to contextualise those complaints within all the lack of complaints you don't ever hear about. Any story can seem big.
Thank you for seriously considering improvements to the support. I've been in need for a new Laptop to replace my old 2008-ish laptop and I am considering forking over the 3000 EUR or so for my desired configuration of a framework laptop, and reliability/support is on the top of my buying-criteria.
As I have experience working customer support in IT for a few years, I know good support is both hard and time-consuming. Systemic change is hard too. And to add to the list of difficult to impossible tasks: Staying always truthfull, while providing helpfull support-replies is like near-impossible for most organisations.
Gotta be real here, this isn't a "wow, what a weird one-off" situation, Framework support is absolute garbage-tier holistically and by design.
I love your company's philosophy. I love your products. I am typing this comment on a 13 Pro, and I own two other 13s. I've upgraded the display in one, and I've sold an empty case off to someone who had a motherboard that they wanted to turn into a whole system. It's all great.
But when something goes wrong (like the motherboard that caused me to have an empty case in the first place), the experience is so deeply unpleasant that it makes me mad all over again thinking about how absolutely useless the support is, and how much process and rigmarole they make you go through. "Take your system apart to do this annoying thing." nope, didn't fix it "Okay, now take it apart in a slightly different way to do this other annoying thing." Repeat over and over for many cycles until finally "sorry, we're not going to actually do anything to help you, even though there are many other people on forums reporting this exact same problem indicating a defect."
If you look at the r/framework Reddit, like half the posts there are people being angry about support. It's genuinely bad, and a real problem for your company. Which sucks, because the products are so great and deserve premium support.
Since we're talking framework keyboards, mine likes to hold down the arrow keys randomly when I'm using them to scroll through text (as if the key thinks its still held down). I didn't buy it from you directly, so I can't really open a support ticket.
You can open a support ticket regardless. The original warranty would transfer on resale, but out of warranty, we still provide support/guidance on debugging or what part could need to be replaced.
Okay, this is the kind of thing where I think you need to have a better picture of what your customers want. "We'll provide guidance on debugging even out of warranty" sounds really nice, but here's what it means in practice: The support people are going to have you do a lot of very difficult debugging steps, along the lines of what this blog post talks about -- disassemble this, take a picture of that, reset this other thing. And they're going to do it one step at a time, so that every time you do one of these annoying tasks, 15 minutes later they'll send you another piece of homework involving major laptop surgery.
And this will go on for many, many steps. And when you finally get to the end of it, they'll say "sorry, you'll need to replace this keyboard, and it's out of warranty, so you'll need to pay for it yourself" and you'll have spent many hours over a period of weeks just to get the answer that you were 95% certain you were going to get in the first place.
It is true that they were out of warranty and couldn't reasonably expect a free keyboard. It is true that your support helped them identify that the keyboard was the issue, so it was a successful diagnostic in some sense. But the experience for the customer is super terrible and infuriating.
What would you want as a customer in that situation? What I'd want is to get an email like "Hey, I'm really sorry you're having that problem. As you probably know, you're out of warranty. There's a pretty good chance that you're going to just have to replace the keyboard, but if you're interested in trying to debug it to make sure the keyboard is the problem, we're happy to work with you on that." And then if I did want the debugging, I'd love to get a single document containing the debug steps that I could work through in one sitting.
That's why I think your insistence on "let me see your case to identify if any steps were done wrong here" is off-point. The problem isn't any particular debugging step or any individual case, it's that your whole process is fucked and customer-hostile in its conception.
Yes, but usually when a company has good support with exceptional instances of bad support, a single complaint getting to the front page doesn't get a pile of other people saying "holy shit yes, their support is so terrible" and does get people saying "wow, my experience couldn't have been more different, some of the best support I ever got."
When you will start shipping worldwide, or allow to order with delivery services? I am writing to support with this for years. You dont need money it seems.
Shipping somewhere isn't that easy. You need to make sure you get your accounting done correctly with all the tax laws of every country you sell to etc.
It's not like selling to a country is just changing the address on the label...
If your support process is this awful now and you dramatically improved it already this year, one can only imagine how beyond hellish it was before. Or you're in extreme denial about successful your changes have been.
I'm rooting for you guys. Framework is a great concept and I want it to succeed. Good luck.
We're improving, and we're never going to stop improving. Partially, the expectations customers have for us are correctly higher for us in 2026 after five years of building and shipping products than in 2021 at our first launch.
> There are several changes we made earlier this year to drastically shorten the number of back-and-forths to issuing replacement parts when submitting a support request
Really? This was the drastically improved process? :D
I'm not a framework customer but am EXACTLY the target demo, and between this and the other horror stories I'm taking real, customer experiences to heart and not ordering your product.
This shouldn't just be you posting in an HN thread, this should be a "We fucked up. We know we fucked up. Here are all of the things we're going to do to never, ever, ever fuck up like this again."
This reads as "We know things aren't great and we're working to improve, have patience"
Nah, fuck that. On a multi-thousand dollar system patience for shit like the issue OP is reporting is exactly none.
You can choose not to buy it but have some perspective. This is a reddit tier hate comment. They are a small company working in a difficult space for small companies.
From my experience, small companies tend to have the better support because they don’t outsource and know and care about their product, and care about quality support exactly because it’s a difficult space and good support gets and keeps customers. That doesn’t seem to be the case here.
Yep, agree. But in this case is laptop hardware. The fact a small company is able to compete with products remotely similar to the like of Dell, HP, etc is pretty incredible to me.
Agree support leaves a lot to be desired based on this thread, but the gp I responded to was overly harsh, particularly when they aren't even a customer themselves.
This isn’t the first time; serious issues with Framework’s support have been reported for a long time. I therefore agree with the GP and wouldn’t buy a Framework product, especially since the upgradability/repairability/sustainability aspect kind of requires good customer support. One doesn’t need to be an existing customer to come to that conclusion.
I don't see how that is an excuse? I agree there shouldn't be an expectation for perfect service, but I expect some proportionality to how much I spent on a product.
my framework laptop arrived with a broken lcd. they only accepted my claim once I provided significant photographic evidence, and then dispatched a replacement screen. the entire process took around 2 months from initial delivery (including shipping of the replacement part). Is it a "hate comment" to complain I want better service after I had already spent ~£4k on the device?
Realistically the level of support you can expect is proportional to the markup on the product, not the price that you paid. Running a lot of RMAs on a product that's expensive to produce and doesn't sell at a price that's much higher is a good way to go out of business as well.
A small company isn't a reason to expect these pains on a high-end product, if anything, it's a reason to expect support to be better.
I'm all for supporting small business, but a business being small doesn't mean it's good or ethical.
Let me give a good example: A few years back SCANOSS, a company that I believe had 50 or so employees at the time, made a github bot that opened a ton of tickets on repos with swear words in the source telling them to remove them. Obviously, pretty much every projcet that got these had the same "Fuck off" response, because, like, it's their free work up for public use, not there for a business to police, let alone by a bot.
SCANOSS's response would matter a lot in how this is remembered though. They could've said "Our bad, that violated TOS, we messed up, it'll never happen again"
That's not what happened. Instead, the CEO clapped back with this,
"""
Our experiment was based on issuing automatic contributions to some components using bad language (detecting and suggesting the removal of such language). The purpose? Contributing to the adoption of those Open Source components. For your information, bad language is banned in most organizations and, therefore, if you are interested in having adoption of your Open Source, it is good practice to avoid such language.
We really don’t need to put any mechanisms in place for this not to happen again. This isn’t something we do on a regular basis and, as I mentioned, anyone could contribute to any repo as long as it adheres to Github’s ToS.
If you are not willing to receive contributions from the community, if you are not interested in your Open Source contribution gaining adoption, or if you prefer people to sign special agreements to make contributions, perhaps you are better off closing down your repository, making it private.
Hope this helps. Ciao!
"""
Now, this story continues - you can go read the full drama at https://opguides.info/posts/scanoss/ - but that's not the point. The point is the response is what mattered. I don't care if it's Google or Mom & Pop Software Co., the communication matters.
The response here, to me, given the sheer amount of frustration they caused for OP, while not on that level of SCANOSS CEO level of tone-deaf, reads to me like damage control, not damage acceptance. That's why I said "Words.". That's what it reads as, to me, is trying to damage control via words. Sure, he says they're improving processes, but this is one of many Framework horror stories I've read over the last year, all from HN, all with this same divide of praise/defense for Framework and people saying "Yeah, I've been burned".
If they're improving processes, they need to it faster, and until it's under control, make communication channels absolutely top tier. Not bounce arround to multiple support agents. What happened here isn't something that should ever, ever have been able to happen in the first place on a multi-thousand dollar machine. Any response short of "Holy shit, I am so sorry, I will PERSONALLY be handling this, here are all the concrete steps we're doing, here's a blog post about all the things we're doing, with dates of review for follow though" isn't enough.
This isn't a hate comment to the CEO's response here, it's a comment I think that's adequately reflective of the fact that it's still a company and they're clearly not doing good enough.
If it's a difficult space, then this isn't the way to win.
"Difficult" space is bullshit. It's customer support, not heart surgery.
I'm sorry that you don't think people have a right to want better service with expensive hardware and to advocate to a public-facing CEO making a bad apology for some vague version of functional customer support, but it's frankly fucking weird to get on here and shame them for it.
No, you get a 3000 euro botique laptop that's DOA, and get strung months? Fuck that and fuck anybody responsible who thinks that's even remotely acceptable.
My wife was needing a good laptop. I chose NOT framework. I read 3 other times of the same type of runaround.
Once is a one-off. 3x is corporate policy. And of course the CEO showed up and 'looking into it'. I'm sure that effort will last as long as it's on the HN front page. Worthless half-promises aren't proof.
I'll revaluate Framework in a year or 2. They might truly mean it and fix their problems. But I'll let others take that chance.
> I'm not a framework customer but am EXACTLY the target demo, and between this and the other horror stories I'm taking real, customer experiences to heart and not ordering your product.
There may be (valid) "horror stories", but what percentage of cases do they represent? (Nobody notices when things go right.)
Most people who are happy with a product don't write blog posts about it, so you'll tend to only hear horror stories. My work gave me a Framework and it's been great for years. I bought a Framework 13 for personal use and had no issues. My only criticism is that they have translucent bezels, keyboards, & expansion cards, but no translucent case for the chassis.
Also it seems to me that if the author of this blog post was so upset, he could at least take the time to write it himself. Pangram says it's 56% AI.[1]
The hardware is great. The support is terrible. If you haven't dealt with the support, you're dealing with the good part, and not the terrible part.
There are basically no stories about good support, except for people whose issues were the ones caught on the first 1-2 steps of their 47-step support scripts, and who don't realize what was in wait for them if they weren't lucky.
Three months ago, we had https://news.ycombinator.com/item?id=49345220. Framework bricked my laptop with a recommended BIOS update and said it wasn't their problem because warranty ended, and that I had to buy a whole new motherboard from their store. This feels like the same treatment. I had to figure out how to fix it myself without any help from Framework.
After it got to the front page of HN, Framework promised action when asked by Ars Technica. Three months later, people are still getting their laptops bricked and writing about it on their forums, and the promised fix to add BIOS flash recovery and making bricking impossible still hasn't been released...
People have been complaining about Framework's support practices for years and even their investor (Linus Sebastian) has done "secret shopper" on their laptops and run into issues, and the response has always been "we'll do better." I am just not seeing the improvements.
I want there to be a good repairable laptop, but the company has to follow through on their promises and treat their customers right.
We are replacing those Mainboards outside of warranty currently, and we should have from the start.
We've also started deploying the BIOS recovery firmware functionality platform by platform. So far we've released it for Framework Desktop, Framework Laptop 12, the Intel Framework Laptop 13 Pro, and the Framework Laptop 16 with Ryzen AI 300 Series. The remaining platforms are all in progress and should be ready by the end of the year.
> I want there to be a good repairable laptop, but the company has to follow through on their promises and treat their customers right.
so just buy a popular model from any popular brand... my ~ 300 usd Acer gaming laptop is pratically modular (running > 5 hours per day since 2020 with no error or stuff breaking so far) except the keyboard, which any mobile repair shop can do the job as they have the tools! spare parts are cheap, easy to find and easy to scrape - Framework is just marketing for USA/EU demographics that can pay a premium and never thought that using the money for a future repair with scrapped parts of a popular model will be cheaper in the long run and probably greener
I love my Framework 13 to death to the point that I cannot see myself buying any other laptop, but I gotta say, Framework really have to up their QA and customer service game.
We also decided to use Framework laptop at work, and we had several with issues. Mine has a broken webcam module and came with a whiny high pitch CPU fan. I did not care for the webcam (hey, can't hack something that doesn't work), but the CPU fan was incredibly annoying. I had to do several rounds of email with Framework support before they send me the replacement part. And we are based in E.U so we have the automatic 2-year guarantee. Idk if it would have been possible outside of the E.U.
I really love the module system, the screen ratio, the linux support, the 180° hinge. But I think it is fair that the frequent QA problem is a dealbreaker for a lot of people (especially at the price point that they ask). For me, as long as they don't fix this, it will mean that Framework stays a niche manufacturer for enthusiast.
I wish they had posted the short story instead of having AI expand it into this formulaic multi-section prose (Pangram agrees), but the frustrations in this story sound too familiar. Framework is a company whose mission I support and I want to succeed, but I know too many people who have had negative experiences like this.
Making entire computers is hard, and making then upgradeable is even harder. Getting warranty work and customer support right is table stakes for selling a computer, though.
It's annoying that what should have been a human telling a story has got turned into tortured llm prose, it's hard to have any sympathy for the author when it's viewed through the claude-lens.
Years ago I had a MacBook Pro that kept having screen glitches. I was pretty sure it was something in the discreet graphics card or between the card and the screen because it didn't happen all the time.
Apple tried twice to fix it, but the same problem kept coming back. Replaced the screen, then the card. The third time I brought it back to the store, the genius looked at my repair history, took my two-year old laptop, walked to the back of the store, and brought out a brand new MacBook Pro in the box, wrapped. He apologized for the inconvenience and let me know that my AppleCare subscription restarted from day one with this new laptop, so it was covered for the next three years. (Happy to say I never had to use it with the new one.)
That's customer service, but it's also realizing after a while, it may be cheaper in the long run to throw it away and start fresh.
What would actually be cheaper is to fix the real problem. To do that you need to find the problem first rather than firing the parts cannon. But it seems that diagnosis is a lost art these days.
Why waste so much time with support? It should have been clear after week 1 that they aren't interested in helping you.
Consumer protection laws exist for a reason. Collect all the documentation and file a chargeback. This is the only way the problem will actually get escalated.
A chargeback burns every bridge, and will ultimately get denied if the company provided the good in return for the money. If you start talking about consumer protection laws, the credit company will tell you that this is a matter for civil courts; their "jurisdiction" is just ensuring that charges were authorized and the goods or services were provided.
It is somewhat unfortunate that "chargebacks", like "talk to the manager", have become cheatcodes because their genuine utility has gotten drowned out by a flood of mis/ab-use.
My experience with chargebacks is rather limited, and always through Amex, but when I received a product that did not work as expected/advertised and their support team denied a refund/replacement Amex was more than happy to give me my money back.
I'm sure there is misuse but if the good you receive in return for the money is non-functional, I think a chargeback is the appropriate step if support decides they aren't interested in fixing the problem themselves.
Sounds like OP doesn't care to maintain the bridge with Framework.
Sure, chargebacks can be abused but what about OP suggests that’s happening here? They spent over three months troubleshooting, exchanged thirty support emails, supplied photos, videos and reproducible diagnostics, tried replacement parts, and sent the laptop to Framework's repair center. They also explicitly asked for replacement parts or a refund back months ago.
A working laptop was paid for and a broken one was delivered. That's a completely valid use of a chargeback. Especially with evidence of being refused a replacement
In some places the consumer protection or fairness in markets laws require that what is sold doesn't just physically exist, but that it arrives to the customer in a suitable state sufficient for the use for which it was sold. It's a crazy idea, I know.
Even the weaker version should allow you to demand a replacement or repair if they send you a faulty product. Is there any country that requires you to do troubleshooting for the seller?
Yeah, at least in germany (so I assume it would be similar in france), you just tell them to send you a new one if the one they send you is faulty. It's not your job to troubleshoot their stuff if it doesn't work like it should.
The experience in the post is unfortunate and clearly something for Framework to investigate.
However, I've been running a Framework 13 for two years, and it's the best device I've ever owned.
3 months ago I dumped a full glass of water directly on the device and kissed my $3K laptop goodbye in my heart.
Powered it off instantly, let it dry, and headed to a well reviewed repair shop in my area the next day.
He called me back the next morning and said it was working perfectly (minus one lost USB C add-on thing.)
He took it completely apart, cleaned it thoroughly, etc and made the comment that he was shocked how easy it was.
A few months later, I am experiencing some degraded cooling performance that I think is related to the incident, so I'm ordering some replacement cooling pads and plan on reapplying them myself.
Overall, I'm completely happy with my purchase and highly recommend them.
PS - Linux support is absolutely amazing. Been running NixOS from day one with 0 issues whatsoever.
Edit: I totally forgot that the keyboard that came with the kit to assemble the laptop when I bought it had some issues out of the box. Framework support quickly sent me another one, and it was here within a week. It has worked perfectly since, so my only support experience went very well.
A business should have trashed it or returned it and moved on, the "support" is specifically designed to waste time and frustrate people into giving up as you found. It's the same at more or less all companies, the consumer facing support is a veneer, it doesn't actually exist. I don't understand why the developer would have been "without a laptop" given it could have been replaced in under an hour, you don't even have to go to a store you can get someone on Uber Eats to pick up a functional laptop, unless this is just stuff a LLM added for flavor. If this was anything more than a brief annoyance I don't understand how you're running a company.
You can assume that people that at least somewhat value the sustainability aspect of the product would choose the, well, sustainable approach to repair.
Too bad being wasteful and short-tempered usually works better.
Yup, and good businesses pay for extended warranties and fast on-site support that normal consumers would never consider, because an employee without a laptop is an unproductive one.
I've never understood this. I used to work for a small company, and even there it was cheaper to have a couple of spare PCs than pay for the expensive support, and it got people back to work faster.
Those support contracts are often designed to be "thrown in" to sweeten a big deal, or let satellite offices manage things easier.
They're often "not worth it" for things like laptops (where in a pinch you can grab one at Walmart) but for servers or other one-offs even small businesses can get value from it.
I had a really awful experience with support, too. Round and round in circles, ignoring key parts of my messages. Replaced a perfectly healthy motherboard because that's what the script / AI said to do.
Despite them denying it when I directly asked, there HAS to be some AI element to the support responses. Maybe it's not full "AI support agent", but at the very least the support staff get a few auto generated answers to choose from and are just skim reading and clicking.
I really like the Framework Desktop but I will also seriously think twice before buying anything else from them in the future...
It's not an AI issue: It's a management / competency issue:
I suspect company leadership isn't paying close enough attention to their support issues; and is treating it as "nrp's problem" instead of supporting them, or otherwise identifying (and rectifying) a competence gap.
I have a Framework 13. I really like it, and I would buy Framework hardware again. But I also wouldn't buy one for an engineer at my company to use as a daily driver in a world where the MacBook Pro exists. I think this misreads where Framework is in its stage of development.
Could you elaborate on that, if you don't mind? I was thinking about either getting the 13 Pro or a second-hand M2 with Asahi and this would help me decide.
Not OP but a developer not working is going to much more expensive in loss of productivity than whatever you save in having modular hardware or cool points.
Repairability is fine, but when working at the scale that you even have a handful or employees and no dedicated IT or even slightly larger than that the hardware shouldn't be a work stoppage, so having hot spares for folks to be swapped immediately and having higher quality machines pays off very quickly.
Mac laptops are some of the highest quality longest last laptops I've worked with, I ran my 2015 mbp into the ground, it still works and was fine with Linux on it after all these years, but it made it a no brainer for me to get a Neo this year, if I get a decade out of this guy as well I will be happy.
Not OP but Apple hardware is very reliable, they have been doing hardware for decades, they control everything in their supply chain and design devices all the way from the silicon to the software. They also tend to use quality parts for all components, even the ones that don't draw attention in the reviews and that other manufacturer might cheap out on.
On top of that customer support is very good usually. You just call them or go to a store and they will offer a solution, but it could get very expensive if you are out of warranty, that's really the biggest downside. As a work machine for a business its something will just work out of the box and continue to work for years with very little maintenance, makes a lot of sense as a business decision.
The MBP is physically robust and I don't have to apply any effort to keep it running perfectly. It just works. (To be clear I use MacOS on it.)
It takes time and effort to keep Linux running smoothly on my Framework. I don't feel as confident about throwing the Framework in a backpack and traveling with it. I don't expect it to take as much physical abuse over time.
I haven't had any Linux stability or compatibility problems on mine, just terrible standby battery life. Like worse than my 10 year old Thinkpad X1 which also runs Linux.
What do you think to the new framework pro models?
Note that M2+Asahi works really well and I can highly recommend to try it. However, battery life time is significantly shorter than with MacOS and there was no sleep mode. I wrote a blog post a few months ago: https://navigatone.com/2026/03/21/asahi-linux-for-daily-usag...
You're commenting on an article about how framework couldn't fix a completely defective (not just fragile desing) keyboard through months of support, and a visit to their own repair center.
Apple meanwhile fixed their keyboard issues last decade.
Macbook keyboards might not be outright faulty anymore, but they still kinda suck. Over the past ~year I've used a 6 year old Microsoft Surface laptop, a brand new M5 Macbook Pro, and a ~4 year old HP, and enjoy the Macbook's keyboard by far the least of the bunch.
ultra-low-travel-distance keyboards are an acquired taste, but I think using them exclusively for long enough has caused my opinions to flip to thinking all keyboards (even desktop ones) should be made more like them
The best thing I can say about MacOS is that it’s okay. But when you’re aware that Windows exists MacOS starts to look pretty good by comparison. Still, Debian would be my first choice. But any time I look at the options the Mac hardware makes me go with Apple.
I have a Framework 16 that I'm pretty happy with overall (running Fedora). However - I did also have an issue with the keyboard at some point which took longer than expected to resolve. It stopped working, and it was also harder than expected to arrange a replacement (multiple back & forths, time-consuming video & photographic evidence I needed to provide, etc.). However, I did eventually get a new keyboard module, and have had no issues with the hardware other than that in 2.5y of ownership.
Overall, whilst customer support wasn't to the standard of their hardware in my interaction with them, it also wasn't terrible (certainly better than some of the larger manufacturers). That doesn't mean it shouldn't improve; it is a part of the purchase experience, as much so as the website, purchase process and the hardware itself - and currently it is a level below those other aspects. I think a big part of the unhappiness in this post & thread is that a lot of buyers feel like they placed trust in a small, new company & concept - but Framework support isn't trusting them back when they say something isn't working.
Overall, I'm still happy with my purchase & would purchase again. I mention this as a counterpoint for anyone considering Framework for their next laptop.
I'm glad to hear it was resolved, but could you share your ticket number or order number so that I can walk through it with the team and see how we could have gotten you up and running faster?
If anyone is interested, I had a recent framework 13 pro and a mainboard issue.
They did offer replacement after about 4 emails.
I am a bit surprised a fault this bad couldn’t be caught during QA. But they’re also a small company and I’m just waiting now for my replacement to come. May be more on intel’s side too than them.
The support experience described here mirrors mine pretty closely.
Endless run-arounds, demands for information that has already been provided, and attempts to troubleshoot things that are clearly not the problem.
I had a Framework laptop that was at least functional for a few months. I didn't use it heavily. I took it to a meeting where I needed a laptop for note taking and... it just wouldn't boot, randomly.
I had to threaten to take them to small claims court in my jurisdiction if they did not immediately accept a return and refund what I paid. They ultimately yielded.
Well that sucks. I had the opposite experience, for what it's worth: new screen, new hinges, very little hassle. They also helped me resolve an issue with the touchpad myself (tightening factory installed screws, iirc), and years later reassured me regarding steps for the BIOS update process.
(This was something like the third batch of the original laptop, don't mean to suggest out of the box failure is still so common.)
Scaling is tough. Being a small scrappy company is a lot easier when your customer count matches your employee headcount. Hitting those next couple performance levels though when you scale from hundreds to thousands, then tens of thousands, then hundreds of thousands… those are effectively completely different company structures.
I've never run a business, but I'm surprised how consistent businesses are in providing absolutely miserable customer support. The customer support team is the face of your business to the people who are directly giving you money. If someone is contacting customer support, then they are already unhappy, and if they are walking away from their customer support experience even more unhappy, then they are going to absolutely hate your business. Employees in customer support should be top-notch and have the power to make things right by the customer at any cost. If your customer support is giving out big piles of money in replacement parts, that's not the support team's fault, that's a fault somewhere else in your company that needs to be fixed.
The reason customer support always sucks is that every company sees it as a place to minimize costs.
Outsourcing to the lowest bidder is never going to have good results.
Precisely. And then most organisations seem to push the support guys away, moving them to separate departments and whatnot. It's the obvious step for everyone in the company -- afterall, support often brings lots of people bad news about their: flawed design, bad UI, bugs in their programming logic, additional feature-requests to squeeze in.
Consequently developers really like to hole-themselves in, as it's comfortable to spend all day, every day just solving those problems that you imagine in your own mind, instead of actually facing any real problems coming from actual user input....
I've heard from industry people that almost nobody factors in customer service to purchasing decisions. Providing it isn't cheap, so you're basically just handicapping yourself in the market.
For mass-market devices, the margins are so thin that every part of the product has already been cost-minimized, not just customer support. Consumers only care about the initial purchase price, and nothing more.
Aren't many laptops only profitable because they take money from pre-installed antivirus, VPN, and other junk software?
However, Framework should be an exception as they are in their own niche.
I think this is the part I don't get. The support team isn't what created the cost, the team that created the problem is. If you want to reduce support cost, you fix the problems that make people contact support, so people don't need to contact support. How big does X need to be for a CEO to approve the statement "You can save $X if you decide to make everyone who has already decided to give you money and has a bad experience absolutely hate your company"?
That's the thing people are not understanding when they poopoo on Apple's products. Unlike any other laptop brand, being able walk into a store, get a laptop and start using it right after getting it while also taking it back if I have any questions or problems is just a wonderful user experience.
I get that Apple's stuff is soldered on or cannot be modified. But honestly, is that really a deal breaker? This stuff has gotten so good that I can't remember the last time anyone opened their computer up to fix or upgrade things. These things have a 8+ year life span and get OS updates for nearly that long too.
I don't know, I guess I just want to get a computer that just works, have it be automatically added to my Apple Care family plan for any damage, and then just get to doing what I need this tool for.
I see the appeal, Apple makes nice hardware. There is a subset of computer users whom require that they own their computer, without carve outs or caveats. For those, Apple is a hard sell.
> These things have a 8+ year life span and get OS updates for nearly that long too.
And I have desktops with components from 15+ years ago that I could upgrade throughout the years, not at the mercy of a single vendor, without creating a ton of e-waste...
> I want a computer that just works
This is a false dichotomy. We absolutely can have modular and repairable computers that "just works", and we absolutely can have a company that builds them and is better equipped to handle exception customer support.
The real lesson here is that a company can decide to pay for the cost of providing great support.
Google famously did the math and found that providing human customer support for their product would cost billions and chose instead to fully automate support.
Apple did the same math, and hired tens of thousands of Apple Store employees worldwide, almost doubling the size of the company. Of course, in the end this is a margin/profit trade-off, but be aware that different companies make different choices.
Dell and HP etc are better than Apple for business. They will send the support technician to your office the next day (or The save day if you pay extra) and they will fix it.
Apple require sending the laptop away somewhere, and waiting days for it to come back.
That’s why I don’t bother with going through support channels if I’m within the refund period. Either send me a new one after the first email or give me a refund. Or if I really want _that_ thing I will skip support and buy an identical new unit while I initiate the return, to get the replacement ASAP. If the manufacturer gets cute or refuses a refund the it goes straight to a chargeback on my credit card, no back and forth.
Reading the article, and the comments in here, is a little sad because it suggests that the thing we all want (I think)-- open, tinkerable hardware that is profession-ready and sold by a sustainable business-- is not actually possible.
The hardware problems discussed are roughly what I'd assume were the pitfalls of a thing like the framework, and the support stories roughly what I'd expect from the cut-rate support that surely is inevitable with a smaller vendor in a competitive space. I had not heard of any problems with framework until this thread but the problems don't surprise me.
I hope that's not true-- that framework's issues are not inevitable but the result of fixable business decisions.
It's not really the hardware that's a problem though. I'm a serial upgrader, and we have 2 frameworks at home. Yes, I think in general the hardware quality doesn't match apple or xiaomi. But that isn't the problem - the issue is that in a modular, repairable laptop, you shouldn't have to deal with customer service for months to get a fix or a replacement part.
Consider that Framework's competitors-- Apple, Dell, Xiaomi-- have O(N) models to support and Framework is more like O(N!).
Then consider that Framework additionally has to spend on R&D for connectors, firmware, patches, errata to make their modularity work; and that they're doing all of this with far less revenue than their competitors.
Its expected that with those constraints that something would have to give, and that customer service would be the first thing to go-- particularly when your customers will tend to be DIY types that self-solve many/most problems.
Everyone else lets you pick different CPUs and RAM amounts and some other aspects too. If you treat the I/O modules as external then Framework has a pretty typical amount of models to support. And that's reasonable to do given how isolated those modules are.
I think this is right. At least for now, choosing Framework is a bit like choosing Linux. It's can be a great choice for the person who understands the pros and cons of the choice they are making, and a bad choice for the person who does not.
I don't get the fascination so many people have with laptops. Tiny displays that are also way below the eye level. Subpar keyboards. Pointing device limitations.
They are portable yes, but how many laptop users actually spend their life in business trips to make laptop a real first choice for their production tool?
Desktop PCs that are tinkerable are massive, and the ones that are tiny are generally not tinkerable (they tend to use custom laptop hardware). And desktop PCs get to benefit from the early days' industry cooperation to create interop standards.
Laptops, due to their priorities (size, thermals, battery), motivate integration, which disincentivizes interop standards. Framework is swimming against the stream here and it looks like they're having to develop custom firmware and connectors to make it all work. The difficulties in the article are entirely unsurprising, given that.
> how many laptop users actually spend their life in business trips to make laptop a real first choice for their production tool?
Downsizing to a powerful-enough laptop has a lot of IRL benefits. Not everyone wants (or can accomodate) a full ATX jet engine. Macbook Airs are not popular because an entire subset of geeks forgot how to build a PC or stopped doing geek things.
They are a bigger than laptops, but they can be quite small.
> jet engine.
Don't put jet turbines in your PC and you won't have jet engine.
> Not everyone
I understand that not everyone is professional computer user. Some people are satisfied with a tablet or even just their phone. Some maybe want to browse the web for an hour a day at home maybe, sure, go get that macbook air. But if you spend multiple hours per day (maybe 8+), why you settle for less? 5-in-1 fork-knife-flashlight-toothbrush-drill is convenient in case of emergency but is not great as daily tool.
I code, use docker, use VMs, play with LLMs. An M-series apple with 32GB does everything I would need from any desktop I'd be willing to pay for, comes with me so I can continue work on a train, lets me monitor email at work....
And if I need a bigger screen, sidecar and airplay work wonderfully. A wireless trackball plunks wherever my laptop is and I have everything I need, any time.
The desktop necessitates a permanent station with keyboard, power, and monitor. This necessitates a desk, which carves out a piece of my living space for an activity that is sporadic. It creates a need to synchronize not just code but workspace state across N devices, and synchronization carries inherent cost.
In a very many ways, laptops are more efficient with life, time, space, cognitive burden, and the sacrifices don't actually matter that much because they are trivial to mitigate.
I don't suppose you aware that laptops get connected to external monitors, and today laptops can handle monitors of any size?
As a developer when someone complains of a problem and you need to sit sided by side to see the issue can you carry your desktop to their office to view and debug the problem?
BTW in what alternate universe desktops are error free?
> As a developer when someone complains of a problem and you need to sit sided by side to see the issue can you carry your desktop to their office
If you're a travelling developer whose job is to drive to different locations to fix peoples issues I understand - and I mentioned that group in my first comment.
> BTW in what alternate universe desktops are error free?
They are free from being stuck with any company. Just use different parts.
I am beyond incensed that my framework is dead in the water because they screwed up the CMOS/RTC battery so when it dies literally the _entire computer dies_; i.e. nothing boots even on AC power.
so now I have to take the whole thing apart, and do a tricky operation to replace it because they screwd it up, and refuse to fix it themselves.
The experience you get from technical support is a good insight into the culture of a company. Too often teams are siloed and don’t speak to each other, and the support team is often deprioritized over the development team.
I am working to replace a vendor right now whose service predictably gets worse at night (I even wrote a script to automate detection of the issue), and they have been unable or unwilling to fix this for over a year. Unfortunately public shaming is often the only way to get a good response from companies.
We’ve been buying Framework at our company for a few years now alongside equivalent spec Dells.
The frameworks have always had weaker batteries and noisier fans but in every other way they matched or exceeded the Dell quality and reliability.
We have been through several mainboard upgrades, saving close to €1000+ on a new laptop each time.
The framework helpdesk could be better, but so can Dell and the rest. One thing I learnt early on is to get access to the framework business support team, which skips you past the first few rounds of dumb questions.
Most of our framework users are pretty happy and that’s what ultimately marks them as a success in my book
The main reason why I always bought (sometimes mediocre) Lenovo, Dell or HP devices was their on-site support. Also not very pleasant to deal with them, but if there is an issue they usually come within 2 or 3 days and just fix it.
If there are any weird things happening, they usually replace the mainboard, which gives you basically a new machine while keeping all the data. This is especially helpful if a device still works somewhat, because it doesn't lead to longer downtimes. Tech arrives, stop working, 1-2h later it's fixed, continue working.
I've been using a Framework 13 AMD for three years. I use Linux full time, so seemed like a sensible choice.
It's been...fine. The hardware itself has held up and feels plenty fast, but I get duplicate key presses on the keyboard sporadically, and the standby battery life is absolutely terrible. Like 5x worse than my 10 year old ThinkPad that uses bios-level s3 sleep.
It's so bad that even if I charged the laptop last night, I won't go to a coffee shop in the morning without a charger. I've debugged it as far as possible. I think this is the expected power drain.
Echoing similar sentiments in here - I want to be able to wholeheartedly recommend it, but can't yet - and I haven't had to deal with support.
Maybe the new pro models are better? I suspect none will be better with standby battery life with s0 sleep.
Yeah, suspend to idle (S0ix) wakes up the quickest, but uses the most power. It tends to completely drain the battery on my Thinkpad X1 Carbon within 36 hours. When I got my Framework 13, I made sure it used hybrid sleep. Hybrid sleep suspends to idle, then wakes up every hour to check the battery state. If the battery gets down to 5% or it's been more than 2 hours since the laptop was initially suspended, it saves RAM state to disk and powers off completely. So you get quick resume if you use the laptop with in an hour or two, but you also avoid draining the battery if you leave it sitting around for days. This behavior is pretty similar to how Macs work.
The Arch wiki has some useful info about how to get this behavior.[1] It's enabled by default on Omarchy.[2]
I've got an early F13P (AMD). I'm happy with it overall, but if I put it on standby overnight it loses ~20% charge. Before I put Linux on it, I configured the BIOS to never charge past 80%, and I don't think I've gotten it below 20% more than once or twice, so it's been treated pretty well (it's also less than a year old...).
I've had a similar experience, though within the first two weeks they agreed to do an exchange. Within 3 months, the main board on the new machine shorted out, they replaced it again, same thing within the following 6 months. They replaced the machine again, it went 16 months before shorting again, but also required 3 keyboard replacements during that period.
Regretfully I had to switch back to a mac because our IT manager couldn't justify all the time and energy required to maintain the machine.
Christ. How hard can it be... If it's broken on arrival, you take it back immediately, no questions asked. And preferably, you send a replacement before you've even received an ack on that, especially if it's a repeat customer.
Sounds like no one ever thought to ask "how much patience does our customers have?" and "how much patience does this particular customer have left?"
I have zero tolerance for dealings like this, and once you're on my blacklist no amount of press releases about improved processes and a hired CxO who be sure to take care of it going forward will get you off of it.
That said, I still respect Framework for what they're trying to do, and from what I hear, the hardware is great when it works. I hope they can get their act together on the business side too.
Back in the 90s I did technical support for Winbook laptops (owned by Micro Electronics, Inc at the time if there are any MicroCenter fans in here).
We had this abusively absurd policy that if a brand new laptop was shipped DoA, the *customer* had to pay to ship it back and had to wait until the new laptop was repaired and shipped back to them. In 18 months there I never saw us pay for return shipping and I never saw us cross-ship a laptop. Keep in mind some of these configurations were closing in on $5k in 1995 dollars.
This was not a particularly uncommon issue either, unfortunately. The dread I would feel when a customer would open with 'So I just received my laptop'. xD
I've been really happy as a long-term owner of Framework hardware, for what that's worth. I've been using a Framework 13 as my main computer since once of the earliest batches in 2021. I've gone through a few iterations of their motherboard and upgraded various other components too.
Also for what it's worth, I've had good experiences with their support team, to the limited extent I've interacted with them (I think I returned a display at some point). I don't mean that to discount the author's own experience, just sharing my own.
I have a Framwork 13 (with the 11th gen Intel). I don't hate it, but I wouldn't recommend it either.
Battery life is abysmal. That is even after the battery upgrade kit was installed.
Recently I swapped the bezel, which was easy, and hey, you can do it. But I never had the wish to replace it with literally any other laptop I ever owned. But on the framework, the plastic bezels somehow disintegrated, and I basically had loose strings of it hanging around.
I'm perfectly happy with my AMD Framework 13 and would absolutely buy one again. I won't need to for a while though, as I've been able to upgrade mine as necessary over that last two years or so.
Depending on what you are going for you may want to add nohz_full,nosmt to your Linux grub kernel command line arguments and set noatime on ext4 filesystems in file /etc/fstab.
Turning off smt (and nohz_full; it’s not a network server) lets the cores clock down cleanly. Got that trick from the intel manual and learned about clock domains from a Verilog programmer. Has worked reliably on many Linux systems.
Even found that one of my i5 servers never had smt to begin with, which explained its more consistent performance.
Had been poking at this for at least 5 years prior with powertop(8) to no avail.
EDIT: nosmt also effectivle doubles ram cache size. For my work the extra hyperthrrad is useless, because there are rarely mixed processes where some to integers and the others do floats. Bottlenecked on ALU and cache, mostly matrix stuff.
I have had an issue with a failed bios update on an AMD 13. There's a page on their forum that shows its been an issue since July, for a specific upgrade. I bought 2 at the same time and now won't upgrade the bios on the second. It's still being offered.
I can confirm the support was always someone new, I also had to repeat myself.
I did get it all resolved and it took a month when they sent a replacement main board.
But I have lost faith in the company and will need to see in their newsletters over the coming months how they have improved before I could buy again.
It really ought to be possible to flash a complete bios image in cases like this. I don’t understand why latop companies (FrameWork is not alone here) make it so difficult.
I recently had to fix a failed bios update on a Thankpad X1 (which had stopped booting altogether) which necessitated acquiring a bios image from an online forum & flashing that from a Raspberry PI over the SPI bus. Lenovo’s answer to this problem was: buy a new mainboard.
Is there some logic involving Secure Boot that prevents laptop manufacturers from offering a way to flash an intact image after a failed bios update?
For many modern desktop motherboards, there is a BIOS recovery that allows you to load a BIOS image onto a USB drive. You then plug the USB drive into a special USB A slot (it will be labelled on the IO shield). On boot, the BIOS will immediately try to overwrite itself with the BIOS image from the USB drive. Unfortunately, I think this feature is more rare on laptops.
I have a maxxed Framework 13 and the thing just reboots randomly sometimes. I have tried everything but if course I cannot try a different OS and wait for the event to happen as supports wants me to.
This is in addition to a month-long saga of lagging graphics because of kernel issues that was eventually fixed.
In short: they are a worse computer per buck than Apple ones, and repairability and upgradeability is more of a gimmick that will be possible/make sense only on very specific occasions.
As long as Asahi is WIP, any Macbook comes with a heavy penalty known as macOS and Apple not giving a fuck about power users.
I've been stuck with one at work because it's still much better than Windows, but my god it's painful... Homebrew/macports are so much worse than good Linux package managers (I use portage or apk at home), the whole system is sluggish compared to a good ol' X11 WM only setup, the base UNIX system is full of bugs related to their lack of actual POSIX compatibility and old coreutils/bash fucking up.
In 2024 I was looking for a laptop to replace my T2 Macbook, and being a pretty geeky dude I was leaning towards Framework. I ultimately ended up getting my Thinkpad P16s just because it was a fair bit cheaper for better hardware, and I absolutely love it.
Looking at this I'm kind of glad that that's the direction I went.
My refurbished 13 came with a USB-C power cable with the plastic shielding cracking and breaking off practically out of the box (noticed it within the first week). I engaged their support via email and they responded fairly quickly and after sending photos and serial numbers, they did send me a replacement without any undue hassle. Obviously a power cable is less expensive for them to just send on as a replacement, but I was happy with the outcome.
You could just as easily look at the situation as "why were you shipped a defective cable from the jump" and I do agree, it is odd that they sent it like that, but they did make it right.
Sorry for those who have endured a torturous experience, and hopefully Framework improve their processes.
Between these stories and frameworks being seriously overpriced for what they are (even before the ram & ssd shortage), I'll probably never buy one.
3000 EUR is an insane amount of money to me for a laptop. You can get a used Thinkpad for a few hundred bucks that is good enough for development. Maybe you need a ton of ram for vms or a good CPU for compiling, but 1-1.5k should be plenty
Why would you compare something new and something used? It baffles me how common these kinds of posts are, for example, in anything Raspberry Pi related.
I have Framework 13 with 32G of RAM and it cost 1200 € (new!).
If it baffles you how common these kinds of posts are, perhaps a re-evaluation is in order.
Private individuals buy used hardware all the time that works more than adequately for their needs. The reasons behind this are too great to enumerate, but a shift towards predominantly Web-based workflows has something to do with it. Nobody needs massively beefy hardware if they are just going to prompt and Figma. And working with specific tools that are OS-locked (SolidWorks, Fusion, etc) tend to be the exception rather than the norm nowadays.
On the company front, there are reasons why companies would obviously want to buy new hardware, such as warranties and other headache-free situations, but even so depending on the size of the company a "hand me down" policy might be in place where previous generation hardware is rotated among staff before it's retired. So even still, used hardware is in active rotation long after it's warranty period etc.
If you end up with constant issues when buying new, as is the case in this article, then it will prompt all the people who typically buy used/reliable to chime and simply say "you should have bought used and reliable", even if it is not entirely applicable it is valid to consider.
I got a semi-old Lenovo 15.6" laptop with a 3K IPS (colorimeter built into the case), and 32GB of RAM for about $80 USD. It is obviously not perfect, but for $80 it's a joke of a useful machine for many development tasks. It obviously costed a lot more than this brand new, and yet... it has the exact same performance as if it was brand new (obv. RAM is slower than actual 2026 tech). There are replacement parts galore for it and it is easy to take apart down to every last bolt and reassemble, and Lenovo shows how to do this. This is a company that understands its "secondhand market" userbase.
I'm in the same boat tbh. I was an early adopter of the framework 13. I was happy when I was able to upgrade to a new motherboard and CPU, but that's about where it ends.
Ootb the internal microphones never worked and my fingerprint reader was intermittent at best. It didn't get in the way of work so I never really bothered to try and troubleshoot it.
Fast forward to more recent times and I've been using the laptop for a lot more work so I decided to try and fix the broken parts. It was many months of the same kind of back and forth with support, nobody really understanding the troubleshooting I've done already. The audio was a cabling problem that was easy enough to fix. One pcb and one cable to possibly replace.
The fingerprint reader was something else entirely.
I replaced the entire fingerprint reader, the entire cabling and I still had an issue. At this point they told me I needed a whole new input cover?? Turns out the touchpad routes the signals for the fingerprint reader and I actually needed to replace that.
I specifically asked about replacing that when I first opened the ticket and they assured me that would not fix the problem. I could have bought all the parts I possibly needed after a single email, and in hindsight I should have and then just returned all of the unused parts. Instead I spent hours taking photos and dissembling and reassembling the thing.
And after all of that I still can't use my laptop under heavy load because the NVME drive will simply crash and stop returning any data. No SMART errors, latest firmware and drivers everywhere. Multiple drives all with the same exact symptoms.
I will not be upgrading the FW 13 pro after this experience.
I'm fairly happy with my FW13 but I wish they would put a better webcam in this thing, and make a much greater variety of plug in modules e.g. IMU/GPS, 5G, airtag, dual USB-C, etc.
I have a Framework 16 for a couple years now. Last year I was having an issue with the monitor somehow randomly going off and causing a freeze of everything on it. No freeze on the external monitor and I can continue using the system if the mouse pointer was there before the freeze occurred. I started the whole support thing too, but bailed when they asked for verification as the laptop had been purchased with the help of a former employer, and they no longer had related emails or stuff from the packaging. A few months ago I threw Claude at the problem and it took a few diagnosing sessions, but the workarounds it eventually applied have been holding, luckily, so all's been well for a while. No need to touch support nightmare for things that AI can handle.
> A few months ago I threw Claude at the problem and it took a few diagnosing sessions, but the workarounds it eventually applied have been holding, luckily, so all's been well for a while.
I don't understand why people feel offended if this article is written by hand / claude / gpt / someone with IELTS 8 band.
He had an experience he shared. You can consider it and be cautious your purchase or risk and enjoy the support shenanigans.
He paid for a laptop. He can write his support ticket with claude. It's none of the concern for anyone. But framework is contractually bound to fix hardware. ( And ethically too else why even sell stuff in the name of repairable when you yourself can't handle repair )
Hardware faults are out of framework's control. I would assume they get insurance, warranties and also bake in some markup to serve support and replacement.
Poor customer support is a choice they consciously make.
Not that it excuses Framework, but I had a similar experience regarding a Dell XPS laptop a few years ago. I think many companies tell their people: "Do not replace equipment unless you absolutely have to!" It's a probably a useful general heuristic for them, but it can run amok when the people implementing it don't have the power or wherewithal to override when it is sensible to. Dell spent more than the cost of replacement on techs and parts but never solved my issue (system overheated and crashed under load - I just limited the CPU to 88% for the rest of the time I had it).
I purchased a Framework 13 DIY edition in Oct 2024, my machine would not boot. While this behavior is not acceptable on a freshly shipped product, Framework support was helpful in debugging and I was able to return it back by Nov 2024. The return process was easy.
I then waited a bit longer for the AI 300 to ship and purchased that in April 2025. This machine has been my Linux server where I run my docker containers and claude sessions [I use it more like a server type machine], and my photo library and occasionally use it like a laptop. I'm happy with the keyboard (not such much the trackpad). My daily laptop is a macbook m3 pro.
The initial Fedora 43 experience was a bit rough, but for the last 6 months or so, the framework 13 has been a really good workhorse machine running Fedora 44. I'm considering upgrading my disk to 1T (512G installed currently) and possibly swap to a framework 13 pro after a few months.
There are some risks to new vendor but the alternative is that big tech companies will force you and nudge you down a path where your choices are limited over time. Framework is a welcome alternative, and if you have extra $$, it is good for enthusiasts to vote and encourage competition in the marketplace. While the Macbook M3 is close to a perfect machine, every software release being shipping by Apple causes more deep integration with the rest of the ecosystem forcing you to keep all things Apple and this is not good for the consumer in the long term.
Also, with volume, if you are a school or a software company - Framework gives you some benefits on maintenance, moving memory/disk from one system to another, if one mainboard fails, you can replace it. Framework puts in a lot of effort into upgradeability [eg: from 13 -> 13 pro], I'm not sure how much of that is worth the effort - as I'm guessing as a vendor, you will make some design tradeoff choices on backward compatibility vs being the best of breed for the future. In some of these cases, facilitating a marketplace, where folks can trade in seems more appropriate. Testing the different combinations of choices I'm thinking is also a nightmare - as certain combinations may not work well, making customers unhappy, dealing with returns and aggravation with debugging seems like a problem that framework should not be solving.
I also really enjoy the youtube videos that Framework produces -- really educative, talking about design tradeoffs and discussing competitor products as well. I'll really hoping for Framework to be successful as a company.
I never got the appeal of these in the first place. Sure, replacing/reusing parts is a nice idea. But it's essentially nullified by their weird pricing. Ecological? Sure. Economical? Absolutely not. Everyone that owns a Framework that I know turns out to be a massive LLM fanboy, and honestly I think without that (biased) marketing no one would really give a damn about them. Other than on YouTube all I hear is bad things about them, e.g. getting bricked by _recommended_ BIOS updates and other weird hardware quirks.
I feel like Framework is in a difficult situation.
They seem more bootstrapped rather than funded with tons of outside investment, which makes for a better long-term company outlook.
But this means that the volumes they deal cannot grow quickly, which hurts the value (volume discounts at suppliers) and support experience (which is limited by the rate the support team can grow).
It's hard to tell someone who needs a computer to "go get the new FW 13 Pro, it looks so nice and it's repairable" when the laptop is still backlogged and important replacement parts (like keyboards) are still unavailable?
I love my Framework 13 12th gen, but due solely to the company's circumstances their offerings are solidly enthusiast-only, not a layperson's only machine.
For businesses, it's probably viable if you order batches of laptops together with spare parts to maintain uptime before (or ideally without) the email chain song and dance with support.
Do I recommend them? Heck yeah, but only if you don't need it now and have an older laptop that's still working. The non-pro 13 is also a solid option still with better parts availability.
I've had a similar run-in with Framework's support team, and am currently weighing up whether I want to go through that again for a second issue with my Framework 16. I'm leaning in the direction of no, but I have to disagree with the author and say that it's worth sticking with Framework, if only because I can buy a replacement part instead of a replacement laptop. Maybe your business can afford that but many of us cannot.
The thing with Framework's setup is that they are really in the exact situation where build quality would suffer the most: Unlike large companies, they don't have the product volume nor the capital for fully automated manufacturing + rigorous inspection/audit, and their hardware are way too custom so they can't use a lot of well tested off-the-shelf parts with the quality assurance amortized like a lot of white box manufacturers.
Big component manufacturers usually tend to not to want to work with somebody like Framework because it's a lot of work for relatively little profit because the lack of volume, which is why the vendor they work with tend to be smaller, cheaper suppliers with weaker engineering/quality assurance.
Framework are fun personal laptops to play around with, but for enterprise, it's probably better to stick with the large manufacturers, as bad as HP/Dell/Lenovo may be sometimes.
In case anyone thinks OP is exaggerating, this is the same frustration I had with support more than 3 years back. Somehow, this seems to be a continuing theme
I've bought a few Framework 13's and a F13P. I generally like them, they're expensive, but are very reparable. F13P is a big step up from the original F13.
They're a good value proposition if you think you'll ever damage your laptop enough to warrant a replacement. I was moving boxes once and dropped in on my F13, destroying the display and the lid. I spent maybe $250 and about and hour or two of time, and it was just like new.
I haven't had any of the QC issues people have been talking about.
One big draw for me I haven't seen on other laptops is the 3:2 display ratio.
One thing I wish they'd change is the keyboard. With such easily replaceable hardware, I should be able to get different styles of keycaps and switches.
Another thing is battery life. The F13P is much better than the 13, but it's still not great. Not sure if it's a firmware issue, a battery issue, or both.
My first reaction to this is wanting to defend Framework by sharing my own experience. It's interesting: my desire for Framework (and its repairability mission) to succeed leads to a bit of tribalism, as I think is evident from the other comments. Framework has a lot of great things going, but that shouldn't excuse it criticism on its customer service, which is clearly an issue.
I use a Framework 12 as a daily driver and it's by far my favorite device I've ever owned, with very few issues. However, the one physical issue led to so much back and forth with support that I just stopped responding. Both things can be true! I'm still rooting for them, and would buy from them again, but they do need to improve.
Framework's hardware is great, I love my Framework 13 Pro. But I've never heard a single good thing about their support. Every single story I ever heard was about endless cycles, asking for pointless photographs, and failing to fix the issue.
If anything ever breaks, I'll just pay for the replacement part and fix it myself. Which is probably what they want.
To offer an alternative perspective to the large amounts of criticism here. I have been enjoying my Framework Pro immensely. Granted I was laser targeted as a Linux user who had a Macbook Pro because of the build quality/battery.
Hearing some of these stories has made me a bit scared if I ever have to deal with Framework support. I understand they are a much different company than Dell or Apple, so they face different constraints, but I'd hate for them to disappear because too many people are burned or are afraid of being burned by them.
It really seems like they're dedicated to learning from feedback, so I really hope their support team can improve their process and break through their reputation.
I got the original F 13 ... great for learning, experimenting, fixing (and more learning by doing so). But not really a "build once and forget about it" type laptop. Customizations can some time and if you just want it because it's "open" but you're not tech savvy, you're screwed.
yea, this and a lot of the comments here are obviously bad. I just got my Framework 13 Pro last week and love it but QA, customer support, and the ability to upgrade over time are all obviously big selling points for the company. I hope they improve though, I haven't had this much fun with a computer in a long time.
It's funny because having owned a few annoyingly defective laptops from multiple brands, this is how I expect support to go with anyone but Apple, but actually, I would've expected better support from Framework too.
Just get Lenovos people. Solid quality. T, X or P series and if you're installing Linux on it, make sure you get something that was released at least a year ago.
Sure, it's made in China, but seems like there are worse places on this planet.
And here I thought that this was going to be about how, after almost three years, the Framework 16 still has severe firmware bugs that cause the CPU to be stuck at 550MHz[0], it doesn’t work with various USB devices[1], the audio expansion card is broken[2], and USB-PD is broken[3]. And then every new firmware update seems to come with some regression[4][5]. And the community submits patches and they are just ignored[6]. I don’t get it.
I'm just struck by the idea of ordering a new laptop, finding a hardware fault in it, and then arranging to have them ship a part. Is this a weird Framework thing? Return the laptop!
Framework appears to have a 30 day return policy. What's the logic in trying to salvage a bad laptop?
You're either a small, lean company with a small and undertrained support team (The Framework community forum is the best way to find actual support). Or a large, bureaucratic nightmare hoping to send you away before you ever talk to a human.
The Apple stores break this mold, though you have to find and drive to one. And I had an M2 Macbook that needed repairs twice in a row for the same issue. Thankfully the first repair was just barely still under AppleCare, while the the second was covered by work. Because I'd otherwise be fuming for how expensive the repairs were, and that they didn't fix the original issue. No longer using that machine, but I wouldn't be surprised if it'd have broken a third time by now lol.
Yeah, I semi-recently ran into this with a new purchase of the Dell XPS. It came to me with the keyboard broken out of the box, something I knew was a risk given some of the reviews.
Dell created one of the worst paths possible for getting any sort of remediation for this process, force AI interactions, no direct contact with support, and they wanted me to somehow take a screenshot of the fact that the keyboard was malfunctioning.
I would have kept the xps if there was a path to get the keyboard fixed/replaced, but Dell put up so many barriers that the fastest way for me to fix the problem was to return the laptop and get my money back.
I should have been able to drop the laptop off at a local repair shop and had them replace the keyboard, dell made that impossible. Heck I would have happily done the repair myself if the keyboard was available for purchase.
As someone who recently tried installing Linux as the primary OS on an old Macbook... wouldn't recommend it. With all the proprietary parts in Apple products, it's a wing and a prayer situation in hoping the distro has all the drivers figured out. On my 2017 MBP, the drivers for opening/closing the lid and activating/deactivating sleep mode, bluetooth and wifi all had not been fully figured out. Made for a lousy experience and this was the Ubuntu distro for that laptop specifically.
It's also worth saying this, but anytime someone posts a review, or in this case a whole AI written blog, about something, there's a good chance that person is an outlier unless there is significantly more examples. Folks are a lot more prone to complain online than they are to compliment. That this user was so lazy they AI-wrote this blog post also doesn't help their credibility.
For Omarchy in particular it depends on the MacBook, as the compatibility varies between both generations of M and base/max.
That said, I have been using it as my daily on my desktop for about a year and threw it on an old 2016 MBP to see what the experience was like, and I will definitely be putting it on my M5 MBP when it becomes stable.
If you haven't had any issues with your laptop, then you presumably didn't interact with customer support? Or did you not have issues with customer support specifically?
Perhaps OP was unlucky, but outside of this - I don't understand why there are so many companies with good products but terrible customer service. Shouldn't customer service be considered a part of the product?
Yeah no contact with their support so I don't have any commentary there. I do agree that good CS is critical to a small company's product like this. I imagine it's hard to scale that up. I hope they get that figured.
Never feels good being left helpless due to (lack of) customer support.
I have a FW 16 (first gen with the AMD 7040). It's still going strong after 3 years of daily use, mostly docked but stand-alone maybe one or two days a week.
I don't use it on battery much but currently it'll last maybe 4-6 hours? (Assuming typical web browsing / videos / coding.) So definitely worse than macbooks, maybe an hour or so less than my brother's (new) intel ultra laptop.
Build quality has been pretty solid. Only things that have broken have been my fault (keyboard stopped working after the Nth spill, usb connector (for power) is a bit loose after years of sloppy aim) and have been a breeze to replace.
Perf-wise, my only complaint is that I wasn't expecting usb bandwidth to be a bottleneck. Turns out I can't drive 3x 4k screens and fast-charge and have full ethernet bandwidth all at once (each to a different usb port, no dock). But I guess that might've been a unrealistic expectation.
I guess I should note that I've had a minor issue with the amd igpu crashing in a certain game under very specific conditions and the laptop occasionally failing to sleep / wake from sleep. But iirc the former is amd's fault and the latter is unfortunately par for the course on linux ime.
But yeah overall a positive experience. The laptop was definitely pricey for the specs but I knew that I'd be paying for the modularity + small-volume going in. It's also nice for peace of mind, not having to handle it as carefully, knowing its fix-able and trusting FW not to cheap out hinges and the like (previous 4 laptops have all died from hardware after 2-3yrs).
Battery life is fine, but I wouldn't call it good. It's my biggest gripe by far. Sleep with Linux burns 1% per hour. Actual usage battery life isn't awful, but I would need a charge mid day for a full day of usage.
My work MacBook crushes it in battery. That thing is so efficient. I have seen the new Intel Frameworks are looking good on battery, but I don't have hands on experience there.
If I didn't care for the repairability and modularity, I'd go MacBook for sure, which are generally long lasting machines as well in my experience.
Maybe I'm just exceptionally lucky, but I've used Debian on several "mainstream" laptop brands (HP, Dell, Lenovo, etc.), including newest models, and the worst issue I've run into is that firmware updates require more fiddling than on Windows, so it's ten minutes of work instead of one. Besides that, everything has always worked as expected.
I got Framework 13 Pro earlier this year and absolutely love it...
Have run old thinkpads for ~20 years but anyone telling you they run Ubuntu on Thinkpad and have never had to mess about with firmware issues, had battery/standby problems, or had to open it up for repairs is talking shit
I've been using a Framework for a few years. I'm still happy with it and would get one again if I needed one. However I've never had to contact support, so I can't say anything positive or negative about that experience.
Choose System76 computers instead of Framework. Framework comes with nice promise but lack of commitment to make it true and globally available. Very US centric company that in the first pre-sales contact smelled fishy and it seems I luckily dropped of considering them at right stage!
No. I've recently installed Omarchy as a dual boot on an M3 Air and ran it as the primary OS for a week. It mostly works, which by itself is amazing. Bluetooth, camera, trackpad, going to sleep / waking up without issues, battery life is okay. On Apple hardware! There were few glitches but overall it is pretty solid. I could live with it. But. I hate to say it, but Linux is still ugly as hell. With all the eye candy Omarchy adds, with the themes, and beautiful animated backgrounds etc., it still looks and feels awkward and imho it's just not worth it. I am so glad getting back to macOS.
What is so great about Framework anyway? These days Linux runs out-of-the-box on just about any business laptop. AI can quickly verify compatibility or even write/patch whatever doesn't work.
I'm feeling the same about them. I like their mission and I want the mission to succeed, but damn the company is scummy.
So long story short:
I got my framework 13 (12th gen) back in August 2022, in Austria. For those who didn't experience that intel generation, a very common bug is the 400mhz locking even when cpu is cold. In 2024 I had them replace the motherboard due to the bug. Than in 2025 it returned. Since I bought the laptop in austria I was entitled to a repair (austrian warranty law guarantees 2 years again after any replacement/repair). They refused and I had to threaten them with filling a notice at the consumer protection agency for them to react after a lot of time. They shipped me a new amd motherboard, and that functioned for about 2 months before it shorted I believe. After that I had to again spend about a month and a half with support until I forced them to return my money.
I got a Framework 13 in 2021. I was so excited to use it. I had to repair it multiple times, first when it was 2 years old, second time when it was 4 years old. I know the point of having a Framework is repairability and upgrades, but I never had to repair a laptop before, especially during the first 5 years.
I first had to use it as a professional dev device in late 2025, before that it was just a light personal laptop for me. It suuuuucked as a dev device for me. I got a Macbook Pro again.
Their customer support experience is slow and really infuriating, even for design faults they admitted and for things they offer free replacements.
I would probably buy a Framework again for being able to replace parts, but my experience with the support has been meh as well.
I had a known-broken[1] keyboard (Del Key on the Framework 13" AMD, from Batch 3, October 2023) and contacted support with it.
Apparently their support had some e-mail viewer breaking on ">" (dropping everything after, which is terrible when quoting with text mode E-Mail). That drove me crazy because they kept asking for the same thing over and over again. I reported it on the forum[2] but did not receive any response.
When I finally figured out their email bug, they asked me to switch OS and record the keyboard not working on video. I ended up buying the replacement keyboard because that seemed better for my sanity.
I did replace the CPU fan as well, and it worked well, even a bit smoother than with ThinkPads. I also replaced memory. I like their documentation for stuff like this.
Recently, the camera has become unreliable, quite likely the routing of wires through the hinge breaks the cables after I opened and closed the laptop a few times.
I still mostly like the hardware and the philosophy.
yep, same problems with Framework myself. Got the 11g had issues never resolved after dozens of photos and back and forth. Replaced for the 12g, had to wait years for security updates, for the battery to actually be supported, never got the announced Thunderbolt compatibility.
I have a 13 laptop that is now 16 months old and has had multiple issues with the display. I am on my third screen with the exact same problem as the first 2, a line that runs from the top to the bottom right where the hinge is poorly attached and rubbing on the display. I sent pictures, I sent videos, I talked to different bots that were all too stupid to understand. Like this guy, the 1st time I dealt with support they claimed it was OS related; because my drivers were out of date... That is odd when the line is present at all times when the screen has power applied. I sent them videos of this, narrated them and put subtitles on it. After 21 emails, they sent me the first replacement screen. The 2nd time, it took 27 emails. The third time, after just 4 emails, I said fuck it and decided to run it as a desktop now. Their mediocre hardware just isn't good enough to have to deal with their shitty support.
Sounds like a typical tolerance stackup and/or frame rigidity issue expected of a low volume && modular product. When you're not Lenovo and you're not shipping 1m unit/year, nor you're Sony with decades of miniaturizing things too much, nor were you Apple with obsessive pursuit of frame rigidity and Foxconn as a partner-in-crime, but you did have bunch of modules that easily come out and go in... you get combinations of parts that passes unit tests but fail integration "tests".
The reality is that it is far easier to purchase a used dell latitude or Lenovo Thinkpad off of ebay or craigslist and just update the memory or storage. I recommend integrated intel or AMD graphics though.
I received a Framework Laptop 13 Pro last week. DIY edition, but it was more simple to put together than a desktop PC. On realising a corner of the trackpad haptics weren't working, I contacted support. I'd already performed some basic troubleshooting which they didn't ask me to repeat, and after a couple of rounds of sending some photos (including, like in the article, the packaging box) and videos, they think it's a hardware fault and have escalated the ticket for a replacement input cover.
Until now, each response took a day or less, and felt efficient without any repetition. The latest response does have that worrying boilerplate that they're "currently experiencing a high volume..." so I'm hoping it doesn't all go downhill now.
All in all, the fault was disappointing but these things happen. The rest of the machine is wonderful and, coming from a MacBook Pro, I'm very happy. This may change if I have to wait weeks for another dodgy trackpad though!
Meanwhile Tuxedo sent me a replacement fan for free for my five year old laptop for free, a laptop that they didn't even sell anymore and which was well past its due date. When I had an issue of the software kind a support perdon answered with command line snippets that helped pinpoint the issue within an hour.
YMMV but son's Framework 13 AMD has been great with daily use for 2+ years, very solid. I plan/ned to buy one before RAM prices killed my enthusiasm for any computer purchases...
Getting support on a non Apple laptop is terrible. Period.
Apple has its flaws, but I will never buy another laptop brand ever.
I have been burnt or seen people burnt on all the brands.
Also, I hate laptops. Make workstations great again. JK, they always were.
I have a framework 13 amd and I adore it. Bad support can ruin anything though and it will absolutely break my heart if/when I experience that.
I do hope they figure out how to improve their support experience, because I'll definitely research it before I make another major purchase from them. And I really want them to be where I buy all my laptops from in the future. It's soo good.
not to be a jerk to the person who posted and I get it, people expect things to work out of the box, warranty support, etc. but after all the frustration with the first keyboard, why didn't they just order a replacement? Isn't that... like, the whole point?
Same story with the software part. Good thing it's OSS. Bad that nobody cares to even reply to PRs.
My FW16 sometimes doesn't charge with chargers <100W. Spent, I guess, half a year lazily hunting it down. Found the issue: it was missing cleanup. Stage 4 disabled charging, stage 15 or something very late failed and forgot to turn charging back on.
Sent a PR, posted on the FW forum. No answer after 20 days. I've fixed it for myself, but what the hell.
I recently sent Framework some feedback about their new wireless keyboard and trackpad product because I saw them return to the mutt arrow key layout of the Framework 13, rather than the superior inverted-T layout of the Framework 16.
I thought they'd learned, just like Apple did after they tried the same thing, but they're going back to it after I thought they'd seen the light. In my opinion, that warrants feedback.
I got a redundant response with very improper grammar and lots of extra pleasantries. Which is incredibly confusing because I remember getting much more thoughtful and engaging responses from their support in the past. But something in me broke when I saw this. Just take a look:
Hi there,
Thank you for reaching out to Framework Support. We are here to assist you.
We acknowledged your feedback and we appreciate your time bringing this up to our attention.
We will make sure to know the right department regarding your concern.
If you need any further assistance and have more questions, please reach out to us anytime.
Have a great day!
This goes against everything I thought of Framework as a company. Maybe their hardware is still good, but this almost makes me fear that their heart is no longer in the right place. What happened?
Maybe customer support has nothing to do with the rest of the company, and this is something they don't even know about. But that's already not very detail-oriented of them, so it still makes me worry all the same.
Plus, no matter how good the product is, much like TFA, if their customer support is garbage, buying from them might simply not be worth the trouble.
Nobody ever had a shit time buying a Mac. It’s just effortless. And the hardware blows all these slop providers out of the water, so the better hardware angle doesn’t even exist anymore.
If they have 10 different "people" to handle a single ticket and act like it's new every time, they have the staffing to handle a ticket like this. Anyone justifying a support person's refusal to read ticket history is part of the problem.
On a 16 I thought for an employee, he had two full ssd corruptions. FW sent new SSDs, but they didn’t really care to diagnose the issue. Turned out to be a bad motherboard only after I refused to accept a third ssd.
On my 13, the battery dies in shutdown, constantly. Linux OS, if I don’t shutdown completely it’s dead in a day. If I shutdown completely it’s dead in three days. I have a surface pro 3 and 5 with OLD batteries that last months in shutdown.
Other units have had bad trackpads, keyboards, webcam, randomness like the keyboard light going in and out, and I had a screen die just outside of warranty.
YES, all these issues would be fixable with just one tool. The economics of replacement parts is wildly different when I look back to how much I’ve had to spend on the four frameworks we have vs the thousand non-frameworks we’ve gone through.
I love what Framework claims to be and have always held them as one of the companies I will check out when it's time for a hardware refresh for myself, but after reading this they are 100% out of the question for me.
If there's one thing in the world I will not tolerate any more than I am literally required to, it's this absolutely intolerable type of "support" that has become the norm in this country. This whole read reminds me of trying to get help with cars, phones, digital services, apartment rental - basically any place where I have ever called in to, they all act the same. No continuity of service between agents, no actual interest in "solving the problem", a complete and utter subservience to their "script" or their ways of "trying to help" (which is a set of processes or utilities that are targeted at the 90%, not the people who have actual issues).
For anything that I have any control over purchasing, I will not subject myself to that kind of customer service. It makes my blood boil talking to these people and hearing them just repeat the same bullshit over and over without ever actually engaging with what I'm saying, or recognizing that what they are suggesting couldn't possibly help me, with an indifference (or worse, arrogance) for my situation.
If this is the type of support that Framework provides, I hope they fail. I hope every person there gets dragged down by the company's dumb-as-fuck focus on the product and not the relationship. It's always gotta be both and these libertarian-lite MBAs have to learn that one way or another.
There's a lesson here: When you run a specialty business, you need specialty support. Now, that's easier said than done, because if you take capital, your investors, who are lazy and complacent and used to easy ZIRP-era rocket ships, will shout at you to reduce your spend on support. If there's a way to outsource your support to a couple of plankton at the bottom of the Mariannas trench, and it saves a few dollars, your investors will think it's a brilliant idea. If that's what happened here, hopefully Framework's leadership has this event as ammunition to shoot down the investors and right the ship.
I've never had one of these so I find this confusing "The keyboard isn’t detected when centered, and when moved to the left it shows up as… a numpad." - in what way is the keyboard centered? How do you move it to the left? Sorry if this is obvious. The Framework laptop shown in the picture(sitting in a bin) just looks like a normal macbook, how would you move a keyboard on that?
There are five electrically-USB “slots” for the keyboard, spacers, and optional numpads/macropads/blinkenlights that Framework sells. Here’s an article from Framework’s KB going into a little more detail about positioning: https://knowledgebase.frame.work/en_us/possible-input-module...
there's something nice about being able to buy a Mac and simply return it to Apple within 30 days for full refund even if there is no technical issues with it.
Even though I'm rooting for Framework in their battle for repairability and upgradability versus the rest of the market which is obsessed with thinness and soldering and gluing everything... I have to acknowledge he's right to say "to hell with this company" after all that BS.
We've all seen the XKCD where a magic phrase gets you booted to a real engineer who can understand technology, instead of these script-readers who lack even the most basic computer knowledge.
You'd think that as a company which exclusively markets itself to and caters to major tech enthusiasts, Framework would have some kind of formal policy to detect when the end user calling has moderate-to-heavy troubleshooting skills and handles the situation with a reasonable process, as opposed to the treatment he got, which was basically just like dealing with Tier 1 support at HP or something, where they just walk you through rebooting or restoring the software, until you give up and throw the laptop in the trash.
Especially in the end: Clearly they sent the laptop to a place where a minimum-wage lackey opened it up, plugged it in, stuck in a USB key and ran a memory test, disk test, flash all the pixels on the screen, maybe tested the ports, and tested the keyboard in a primitive tool that amounts to a text field, by typing 1234567890 and qwertyuiop. Maybe he even swept his finger across all the keys, but that forward-delete wouldn't have been detectable.
If there were notes on the case for that person to see (and if they were competent enough to understand them), thanks to those script-readers they'd have probably seen 79 email messages, each with quoted previous messages crapping up the thread, and most of them consisting of irrelevant photographs, and they never saw what the specific problem was. So they probably just noped out of 2 hours of reading that dreck and just did a basic, generic test.
It sounds like they decided to scale their support to work like the big mainstream vendors. Odd choice.
I think the issue is simple that most people do not care. They rather buy a laptop from Apple, Dell ... run it into the ground, and then just buy a new one with a better screen and other improvements.
This results in Framework and companies like that, being more bespoke. So they do not have the volume of scale. When its a one man or small team, your support tends to be great because your talking directly to the core.
When a company like Framework grows a bit, the amount of issue tend to grow also. So they are required to get a lot of staff and the core (hardware and support) itself gets water down somewhere (often support). Aka cutting costs on those expensive humans...
Its actually hard for companies to jump past that, where they get the production volume to force cheaper prices from supplies (on the hardware side), to compensate for the increase human factor.
You notice over the years, with a lot of companies this trend. Where if they are small, great. You brag about them, their customer base grows thanks to the good word to mouth, and after a while you start to notice new names, less well informed, more bugs and issues. What used to be a great personal experience is now replaced with the venire of a large corporate structure, but not the same level of flexibility to get personal accountant managers, etc.
There is this gap that Framework falls under. And they are having a hard time passing this, with the known results. Also the entire hardware market going crazy really does not help given that they are already producing bespoke / more expensive items. They have the drag of a large company but not the advantages of a large company. And getting past this hurdle is often the difference between a Steve Jobs and ... some name you never heard from. Yea, not the best examples but that is the first name that comes to mind lol
It's not just Framework that sucks. It's 2026 and I'm convinced there aren't any good laptops any more. It seems to me that the laptop format is built to be fragile, disposable, e-waste, similar to smart phones. So that they break in a few years or need to be "upgraded" because they become slow.
I can't tell you how many laptops that have broken for me now. I have a stack of just broken laptops in my closet (that I'll definitely fix one day... yeah) All from different brands. They've broken by having terrible fan design, USB-C ports that break, internal batteries that need replacing, power surges that have fried GPUs and other assorted faults.
Yeah, I've tried ThinkPads but modern ThinkPads are now super thin crap like any other laptop and old "refurbished" ThinkPads are on their way out. Then I have my desktop and it just quietly works, year after year. It's a Dell Workstation. Case is already perfectly organised, everything you need neatly inside. Plenty of RAM and CPU, can easily be upgraded. Cooling isn't ideal but at least its easy to maintain.
When my current laptop breaks I don't know if I'll ever buy a laptop again. It's just like... how many times do I want to make the same mistake. I don't think people should have to buy new machines every few years. I also believe the same with phones. But all this tech is designed to be disposable. They want things to fail, get slow, and need upgrades every few years. It's the same shit with every brand.
I didn't make a post to complain back in the day because I generally support the mission of framework, but I initially ordered a framework 13 from them a few years ago. It arrived with a broken display. I spent probably 2 weeks emailing back and forth with support, re-seating display cables, formatting the machine, taking more photos and sending more emails. I had an epiphany one evening where I was bent over the open shell of the laptop with my phone out taking video. "I sent these people two thousand dollars and they sent me a machine that doesn't work, and I'm spending my evenings trying to convince them to fix it". My next email said that I wanted to take advantage of the 30 day refund period and would be sending the machine back. Suddenly support was immediately willing to send me a new display! I thought about it, and maybe that would have made everything work, but I was so fed up at that point that I said no, just give me my money back. I took that refund and immediately bought a system76 machine. Its plasticky, cheap feeling, and the fan goes crazy (although that got much better like 18 months later with the full pop_os release), but it fucking worked on day 1, and continues to work to this day.
Really the biggest thing to come out of this whole odyssey is to convince me just how good macbooks truly are, as I look over at my wife's silent behemoth of aluminum as it rips through things probably at 2x the speed while getting 3x the battery life for 1.2x more money. But I'm a fool who's still romantic about linux and supporting smaller firms and open source, so I make do. I had hoped that framework would have improved and that my experience was just early growing pains from a young company, and maybe my next machine would be from them, everyone deserves a second chance! So its pretty disappointing to see that things are still this way years later.
(Seeing https://poolp.org/ after a curious click) Man, for your own sake, remove or do something about the slop article pictures that make LinkedIn look like a bastion of taste.
Framework's repair center ran complete diagnostics, tested two keyboards, and found that those two keyboards were working perfectly.
All these guys had to do was order a new keyboard. If they demanded a refund for the not-working keyboard they'd get one. I know, from experience having handled dozens of Framework laptops, Framework absolutely will do this.
You'd think someone offering consulting services would be a bit sharper..
The criticisms of the ticket ownership posture are helpful (depending on how accurate they actually are), I have forwarded this along to someone high up in Framework's support branch of its org chart I have a good connection with.
"found that those two keyboards were working perfectly"
Except for the fact that they obviously weren't. You shouldn't have to pay for the replacement part out of pocket, that's literally the entire point of a warranty.
I work leading a warranty repair team for one of the largest OEM PC manufacturers, if a customer complains about a keyboard issue that we can't reproduce, we replace the keyboard anyway. Keeping your customers happy is always more valuable than the cost of the replacement part.
If the technicians in the Framework support center say the two keyboards they tested were working perfectly, they obviously were working perfectly.
The other keyboard, the one the customer already had, was the one that was obviously not working perfectly.
_
> if a customer complains about a keyboard issue that we can't reproduce, we replace the keyboard anyway.
The obvious thing to do. Not doing this is the mistake Framework made.
_
> shouldn't have to pay for the replacement part out of pocket, that's literally the entire point of a warranty.
An in ideal world, no one should have to do anything.
From a logistical standpoint, competent people know how to make results happen. As someone operating in a business I would order a new keyboard.
Could just send the entire laptop back.
_
What I can say for sure, when I have had to make sure that developers and other users are operational, not a single person went with more than a day of downtime just because one (or even two or three) laptops had issues.
Framework is awesome. I am personally responsible for more than one dozen of Frameworks being deployed and will probably be responsible for many more.
> If the technicians in the Framework support center say the two keyboards they tested were working perfectly, they obviously were working perfectly.
Ah no, that is not "obvious". It's entirely possible that they put the keyboards into a test harness that didn't actually test the things that were reported broken (module appearing as a numpad, c key inserting a backspace), and the technicians were not trained or allowed to go outside the testing parameters.
I've stayed pretty quiet about this, but as an early and enthusiastic Framework supporter, I cannot recommend them to anyone.
I bought the Framework 13 before launch, and received a machine from the first batch. I later bought their main board upgrade kit and their screen upgrade kit and I did a full upgrade on the machine and rebuilt it. The reason I could justify that was that I would take the old main board and slip it into their Cooler Master case and use it as a spare machine.
But there was a bug in the Intel chip they used in that main board that prevented it from booting properly inside of the Cooler Master case, and going back and forth with support, what they wanted me to do was disassemble my other computers to troubleshoot the one that should have just worked. They didn't offer a replacement. They didn't allow me to send it in to have them fix it. When I explained that I didn't want to disassemble my working machines to fix my broken machine, they stopped replying to me.
This, coupled with the horrendous battery issues in the first version of the Framework 13, led me to conclude another purchase from them would be a big mistake.
Still happy with all six of my System76 purchases.
Your mainboard fit in the Coolermaster case? Mine had a defect where the case's pegs were too large for the mainboard to fit over them. Framework sent a replacement, same issue. Framework sent a second replacement which they claimed was "white glove service", meaning they would have someone verify the quality of the part before shipping it. Same issue. I returned them all for a refund. Several others on the forum had the same issue.
I also went through 3 hinges on my 1st gen Framework 13 laptop, because the hinges were so weak they couldn't hold up the screen under its own weight.
My thread cataloguing my issues with the Framework 13 got so long, the moderators closed it.
My trackpad stopped detecting clicks. So did the replacement that I bought because it was out of warranty.
One of the buttons for the expansion card removal fell off. Framework replaced that under warranty.
The speakers would cause the keyboard to rattle until I took off the shift keys and adjusted the stabilizers.
I really wanted to believe in and support Framework. I support their mission. But man, everything I've gotten from them has been junk.
I'm on the boat for a second System76 pangolin now. My first one had a few faults but was the best laptop I owned.
> Still happy with all six of my System76 purchases.
I, on the other hand, wish I'd gone with a Framework instead of System76.
My System76 devices keep breaking and because they're a few years old already, obtaining replacement parts is a challenge. And forget about upgrading them or giving a laptop a second life as a desktop.
There are other options.
Big corporations upgrade their computer fleets on a regular cadence.
Their old machines can be picked up from the referb shops for from as little as 10% to 20% off their original retail price.
Over the years I’ve had multiple Dell and HP laptops and mini-desktop machines that have been in excellent condition when I got them, and each lasted me years.
I assume you meant “10% to 20% of”? Because 10-20% off seems like a pretty poor discount even for 1-2 year old hardware.
A friend of mine and I used to swear by old Lenovo devices. Back then, those things were absolute tanks. He even took them with him to Afghanistan—not even sand or dust could harm them. All that needed replacing after the trip were some parts of the cooling fans and the keyboard.
While it is nice that we have more options than in the past for portable linux poweruser laptops nowadays, i do still wish they were better
Framework (i personally love mine, but I haven't had to deal with support yet) Lenovo (I have an X1C for work; it's a great machine, but very expensive, not repairable, and I had significant issues up to 6 months after the model I had was released with the wireless drivers on LTS) System76 (expensive, feels subpar) Dell (lolno never again)
I wish apple provided official support for asahi, but I don't see that happening anytime soon.
> I wish apple provided official support for asahi, but I don't see that happening anytime soon.
Even some level of unofficial support might be a game changer. It doesn't seem crazy, except in the cultural sense: modern Apple views their stuff as the supreme ultimate and for them, interoperating with inferior technologies is kept to a minimum. They don't even understand the concept.
Financially, it could be a win for them in a way that the support for running MacOS on clone hardware never was back in the day.
Here's my perspective because I recently became a framework owner of the 13 pro. Before then I'd bought a Dell XPS that came to me broken out of the box (keyboard was completely fubar).
The 13 pro has been a very good machine for me. Excellent battery life, good performance, just smooth sailing. My one criticism is the speakers are crap. I know they improved them, so I have to imagine the original 13 speakers were even worse.
The reason I grabbed the 13 pro was because framework featured an upgrade path from the original 13 to a 13 pro by swapping out relevant parts. That's what sold me.
>The reason I grabbed the 13 pro was because framework featured an upgrade path from the original 13 to a 13 pro by swapping out relevant parts. That's what sold me.
Note that the advertised upgrade path is not available yet, and won't be available any time soon: there's a reasonable guarantee that no upgrade parts will be available for purchase until at least February 2027, and quite possibly long after that.
Not particularly fair to blame framework for the global supply shortage. You can perhaps complain that they're prioritizing new laptops over upgrades, but I'd argue that's a defensable business decision under current market conditions.
Supplying parts is a pretty major part of their schtick, so yes, let's please hold them accountable.
Accountable for AI companies buying up the market?
Hardly their fault
I mean, yes, but that's because they're still fulfilling preorders! You literally can't buy a 13 Pro off the shelf, either. I think you can make the case that they should do parts-based preorders alongside full-system preorders, but I understand the logistics for why that's awkward.
The speakers aren't Macbook Pro level, but they're not crap. Linux (and maybe Windows, I don't know) just has no good tuning for them.
I have a PipeWire/WirePlumber DSP I'm thinking of publishing. Others have made EasyEffects profiles.
> My one criticism is the speakers are crap.
Ive read you can tune something around DSP with software. Here is a random reddit thread about it: https://old.reddit.com/r/framework/comments/18cngrn/improvin...
I swear Dell have two factories. In one factory they build their regular laptops. These are shit. In the other factory, thats where they build you a laptop if you spent the addition $600 on the 5 year, next-day, on-site service.
Glad I avoided the hype on these and bought a trusty Thinkpad instead. Couldn't be happier.
Just to counter-anecdata, I bought a Thinkpad for use with Ubuntu and it put me through hours of weird bugs. I can't comment on Framework in specific but just a reminder that there are a ton of experiences out there for every widely-used product.
Did you look up compatibility beforehand?
Ubuntu has their certified hardware list: https://ubuntu.com/certified/search?category=Laptop
The Arch wiki also maintains a list: https://wiki.archlinux.org/title/Category:Laptops
While think-pads usually just work out of the box with most linux stuff (dedicated gpus in laptops being the exception) you really shouldnt choose Ubuntu / Debian for a new machine. Latest hardware benefits a lot from a rolling release distro that has all the latest drivers and fixes. After a year or two ubuntu will likely run fine.
Also I realize how cliche it is to show up on the internet in a linux discussion to you you are holding it wrong aha.
I myself prefer the track point so thinkpads are basically all I have left for that and I know loads and loads of people don't use it so it is basically just branding at this point.
I've had pretty good luck installing Ubuntu, pulling the latest kernel in from their mainline PPA, and installing the latest firmware packages.
Yes, and how the company responds to that is make-or-break.
> Ubuntu
There's your problem
I hope you never have to deal with Lenovo support. If you do it's worth paying extra to have a technician come to you, Lenovo's mail-in support centres have terrible quality control.
I bought a used gen 1 T14 and it just worked with Xubuntu out of the box. Of course I came from a 13 year old HP, so almost anything was an upgrade...
All but one of the ones I've had have been great. The one that wasn't was a Z16 Gen 1, which had problems with overheating.
I have both thinkpad t480 and framework 13 - very happy customer of both.
I think there's always extremes to stories like these and I've definitely had my share with thinkpad from dead pixels to month long support correspondences.
disclaimer: this is not to say it doesn't suck when it happens.
author's frustrations are completely valid and i do hope framework improves
You sweet summer child. I was happy with my Thinkpad too ... once.
Then I tried to close the laptop, and my thumb touched the screen. NOT hard, very gently, but somehow it was enough to puncture the screen, and it stopped working shortly thereafter.
This seemed like an obvious defect: I have used laptops for decades, closed them literally thousands of times, and never punctured the screen in the process. Lenovo refused to fix it.
I went to a 3rd party (U Break It We Fix It or something like that), which was a separate nightmare, but after a month they gave up.
So I paid for a Lenovo warranty, even though I'd have to wait like two months before I could send the laptop in. After two months I finally did and EVEN WITH A WARRANTY LENOVO REFUSED TO FIX IT. They literally wanted to charge me about 90% of the original purchase price, with the warranty.
So, I guess they have multiple warranty levels, and I picked the wrong one but FUCK LENOVO for selling me a defective screen that broke the moment the lightest pressure was appleid and then refusing to fix it.
Laptops peaked with the Thinkpad X60.
I have a modded T60 with an i7 and 16G of memory in the original case. It’s glorious.
The X20x line was also great, although the screen area / chassis area was optimal with the X6x.
Still have my “bento box” and fire it occasionally if I need legacy software that neees to run on a malware-eque OS (read: Windows 10-ish and later)
My experience is also consistent with this. I never had a ThinkPad where I couldn't run Ubuntu on. But my needs were pretty vanilla: no GPU, etc.
Second this. (I own Thinkpads and Framework hardware so this is based on actual experience)
honestly, for me it's always been between a thinkpad and an xps... I have been tempted by system76 but right now I think they are massively overpriced, so I just don't think I'd go there any time soon...
> tempted by system76 but right now I think they are massively overpriced
Is there a computer that's not overpriced nowadays? With the global chips crisis I think nobody knows how much a computer should cost anymore. The manufacturers are totally taking advantage of it and slapping any price they want, and will continue to do so for as long as they are able to sell.
If you want to save some money look for refurbished deals. I got a newer model direct from Lenovo off eBay at around 30% MSRP. I wouldn't be able to tell it's not new.
I have the new XPS 14, other than the webcam (maybe there is a fix now, I haven't investigated), it has been great with Ubuntu 26.04.
Note: I'm on my second XPS 14 because the first one had a BIOS error within the return period, so I returned it rather than gambling, and bought a second one which has been fine.
I will never give Dell another dime.
My XPS 15 had 3 battery failures. 2 Under warranty.
After the 3rd failure I tried to find a third party replacement (because of the Dell track record and the fact that Dell was sold out of the battery at that time...) only to find out Dell has battery DRM and won't charge non-OEM batteries. Basically the machine would boot and stay on until the initial charge died- super cool.
My MacBooks and ThinkPads are workhorses... If given a Dell I would sell it to fund a used ThinkPad.
I’m a long time user of IBM and then Lenovo laptops going back decades. Just wait until you find out how Lenovo machines have a WiFi card whitelist so you can’t install whatever model you want. Or that on AMD machines they use PSB which locks the CPU to a Lenovo board, and if you don’t disable it and install a new CPU you are one Enter key away from locking the new one too, after they present you with a misleading “want to secure your CPU” message. And these are just the issues that are the result of conscious hostile decisions. Apple has the same problems with user hostile decisions and 0 repairability.
You also have less intentional issues. A lot of their X1 line generations were terrible, problematic screens, poor cooling, battery issues, BIOS issues, etc. Not just on 1 or 2 devices, but problems that I could see on batches of thousands or more. Apple devices were for years infamous for screen, GPU, keyboard issues, cooling issues (the last Intel models were something special, to put the last IBM models to shame) and so on.
Nobody collects full reliability statistics on the big manufacturers because the data isn’t available so you have to hope that when you buy from a line of laptops you didn’t land on the problematic one.
In the past few years I had better luck with Dell than Lenovo (again, talking large scale, for my use I stuck with some older Lenovo models).
I’m a bit soured with Lenovo ATM after buying a desktop to scavenge the PRO line APU (for the ECC support), wondering for a hot second why it’s so much cheaper than an identical HP, only to find out the CPU can’t be used on any non Lenovo system. Bought another equivalent HP which runs cooler and consistently moderately faster.
> Still happy with all six of my System76 purchases.
Conversely, I'm a bit iffy on System 76. The main reason being, the build quality of the physical device. From a pure computing viewpoint it's fine. Maybe better than fine. But the case is really falling apart. Lots of cracks, and broken fan slats, and such-like. I mean, it still works and is usable, but it just doesn't feel like a high-quality build, so I'm not sure I'd buy from them again.
Not an excuse for them, but you bought the very first product from a brand new company. They'd probably do better today.
For example, I bought the second and fourth(?) laptop they put out and am very happy with them. One issue was there was a problem with the power cable jacket opening up. Suppose support could be a bit faster but they sent a new one after I mailed a photo in.
Let it be a warning to everyone else, early product/early company, expect adventures. You're going to have to help them out, even to make them do the right thing. Believe they're capable of learning however, and don't think this "never again" rhetoric is helpful in that case.
Nah, too much competition to not get it right the first time. Being ghosted by support is especially egregious from a company at any age. Life's too short to care about whether they've fixed their shit.
(And if they ghosted OP for a good reason, then they've only lost one customer, and it was intentional.)
Fantastic support can cover up a lot of sins. Brand loyalty isn't everything, but it is one of the reasons Apple stays relevant.
… or your preferred retailer. This story about Amazon just never gets old. Back in 2010—I believe it was—I ordered a 27-inch iMac. Over time, dust accumulated inside the display, so 18 months after buying, I filed a claim with Amazon. To my complete surprise, they sent me a shipping label, and just three days later, I had received a full refund of the purchase price.
The point being, if you're that mercurial, you should not be buying new products/company at all. Either you welcome risk or are risk-averse, not both.
Hey, shit breaks on first batches. Early adopter risk, no doubt.
But the data points for ongoing shitty support make future purchases a real gamble. Based on the article, it sounds like they haven't learned at all.
I’ve had that same support experience with dell and hp over the years. I’ve also had great support from both.
The only place I’ve ever had real consistent support has been apple. Unfortunately I don’t love their products, so it’s kinda a rock and a hard place.
My framework has been great, and I’ve gotten a couple for my kids, but this story is a real bummer to hear.
If you’re small and trying to compete against a behemoth, decent support is one of your best options. Because hardware is pretty much a commodity.
What the heck... I think I had the same issue as you a few months ago, 11th gen board, very early but maybe not pre-launch, and swapping in a $10 battery off Digikey fixed the "I need my AC adapter for it to boot at all" permanently.
And then I just yesterday did the Cooler Master swap, new mainboard into the laptop chassis, old mainboard as a server, and it went without a hitch, both machines running just fine.
I also don't know the battery issues you're referring to, I don't remember dealing with anything super horrendous in the 5 years I've been using this laptop, but my battery is currently in good shape, probably 6-8 hours on a full charge, which is impressive for a 5yo battery.
Part of my troubleshooting was buying a new battery so that I could swap it in, and I didn't have any luck with that direction, which is why I ended up contacting support.
The battery issues I'm referring to are that when I put the laptop into standby, it'll go from 100 to 0 in about 15 hours. I don't think it's that interesting of a bug since so many people have been discussing this for so long, but I did note that the Framework 13 suffered from that as well.
Is this running windows or linux?
Modern Intel hardware has an active standby on windows that it goes into when you close the lid with the charger connected. If you unplug the charger first, and then put it to sleep then it lasts way longer.
This is not a Framework specific issue though, at some point dell had a service advisory out for some of their machines, to not let it suspend with the lid closed, as it will cook the screen! My 10th/11th gen Intel HP would be warm to the touch while it's on standby.
Yep, I run Linux across everything, and you're correct that this is not isolated to just the Framework. It just ended up biting me harder with that particular laptop than any of my others.
Fwiw my T480 running linux has abysmal battery life when suspended. Almost as bad as when it's actually on!
I've given up on proper sleep unless it's a mac. These days I just save and close everything, and shut the machine down.
> going back and forth with support, what they wanted me to do was disassemble my other computers to troubleshoot the one that should have just worked. They didn't offer a replacement. They didn't allow me to send it in to have them fix it. When I explained that I didn't want to disassemble my working machines to fix my broken machine, they stopped replying to me.
That completely tracks. I've found their support to be extremely lame at best.
You can literally see exactly what I bought and when I bought it but you still need me to crack open the case to get the serial number on the mainboard whose widespread, notorious defect you aren't going to repair, but instead offer a lame workaround part for me to install myself instead?
You need a recorded video of the lid of my laptop gradually sagging downward while I type before you can send replacement hinges under warranty, even though the defect is common and why the fuck would I want to scam you out of little fucking hinges that I need to install myself anyway ytvutyf023f498020923r8
Yeah.
S76 is awesome if you use Linux as primary OS. Stay away if you need Windows.
is windows support that bad? i was under the impression it'd work fine on windows as well
Maybe it's better under Windows 11, I'm not sure. I put Windows 10 on mine in 2024 and it was a terrible experience - sleep didn't work when closing the lid, would die on startup if not plugged into wall power (though after boot, I could remove) being the two most annoying. I wiped W10 and put Debian on it and then everything worked great (sleep on lid close, boot on battery, etc)
i use win 10 ltsc on a 2017 gazelle. zero issues
I did basically the same thing and I've had problems getting the main board to boot reliably. I've not needed it so haven't troubleshooted further. Discouraged it might be a show stopping bug. :(
which System76 laptops do most people get? would it be the Ryzen (Pangolin or Oryx) ones?
Yeah I had the battery problem, had to get a new battery because the first one blew up like a pop tart and I now permanently keep the laptop at 60% charge tops. Are you saying my first cooked battery was not actually my fault ?
> there was a bug in the Intel chip they used in that main board that prevented it from booting properly inside of the Cooler Master case
How do you know that? Is this a known issue you ran in to? Or did it stop working after you swapped it out and then you refused to troubleshoot?
I spent about 15 hours troubleshooting this problem. What I refused to do was disassemble another working computer so that I could troubleshoot the broken one.
The bug is in the handling of power cycling RTC battery. Basically, if you leave the main board unplugged for weeks and then try to power it up, it'll refuse to boot, and there is a complex set of LED diagnostic codes that they had asked me to take a video of and send to them, which I did. They had asked me to pull the real-time clock batteries out of other machines and insert them into the main board as part of the troubleshooting and I said I didn't want to do that.
You can read more about the issue here: https://www.reddit.com/r/framework/comments/vdo3i6/buyer_bew...
> bug in the Intel chip
It sounds like the problem was Intel's and not theirs, yrt they still went out of their way to help you.
They didn't go out of their way to help me at all, in fact they did nothing. Engineering teams that choose components are responsible for those choices. Framework neglected to take any responsibility whatsoever.
Idk, it sounds to me that in this particular case you would have same exact experience with every other OEM out there?
If the other OEM had chosen that exact same chipset, and if that other OEM neglected to do anything to fix it, then yes, my experience would be the same.
But, during this period I've been buying computers steadily from System76, and they have been incredibly supportive when I came to them with an issue (to be fair, I've only ever had to work with System76 support once, but it was a very positive experience).
So no, I don't think it's fair to assume that I would have had the same experience with any OEM. Different OEMs could choose different chipsets, and they could choose to be more supportive.
Fair.
What other OEM would have you disassemble other machines you own and refuse to do anything if you don’t?
"Okay, so, we've established that your dryer's power cable is faulty. All you have to do is replace it with the wire from your stove."
So if framework is exactly like every other OEM out there, what value proposition do they bring?
That's not what I said.
It worked... in the Framework which is what their engineering team designed it for.
Why would they take responsibilty for thirdparty hardware.
Edit: TIL, thank you to the repliers.
They specifically advertised the upgrade kits as an enhancement for your laptop with the ability to reuse the main board in another case that they (Framework) partnered with Cooler Master to create. They even advertised this use case, which I thought was appealing. The problem was it was, to some degree, false advertising.
The Coolermaster case is sold on the Framework website: https://frame.work/products/cooler-master-mainboard-case?v=F...
The key value proposition of the Framework laptop was that it was modular and could be rebuilt as needed with different components so we could maximize reuse. All I'm saying is that when I tried to actually fulfill that promise, I came up empty.
Framework sells coolermaster cases to reuse your laptops motherboard after you upgrade your laptop: https://frame.work/gb/en/products/cooler-master-mainboard-ca... I would expect that to work if I would be buying it directly from the mb vendor itself.
We tend to think like so in the tech industry. Imagine it like this. You drive a car with a faulty ZF gearbox. Would you like to sort things out with the supplier or your local car dealer?
This culture of "it's someone else's problem" needs to die. If you sell someone something, you are responsible for it working as you sold it. Even if behind the scenes you're a customer dealing with Intel failing to fulfil the specs that they sold you.
Why would I as a customer care about their supplier? If you buy a car and the motor the car brand bought is faulty, do you ask the car brand or the motor supplier to fix it?
It wasn't faulty in the Framework. For your anolgy to work, it would be:
Taking the engine out of the car and putting it in a truck and complaining to the car manufacturer that the engine is not compatible with the truck.
You're all over this thread making assumptions that are not true. The Cooler Master case is advertised by Framework (they are strategic partners) and they advertised that this specific configuration is supported, and they continue to do so today.
I linked it in my other reply, but you can still buy the case from Framework, right now: https://frame.work/products/cooler-master-mainboard-case?v=F...
You're leaving out facts that the average person wouldn't know - I don't own a Framework, so I had no idea they made Cooler Master cases.
It still seems odd to me that if this is a common problem and not a random defect, that everyone who bought it should have the same problem and they would get enough feedback to change their compatibility list.
A thought just occured to me: how do you know it's a bug if you didn't bother troubleshooting it with the help from the company?
> I don't own a Framework, so I had no idea they made Cooler Master cases.
Original comment you replied to:
> The reason I could justify that was that I would take the old main board and slip it into their Cooler Master case and use it as a spare machine.
It says "their Cooler Master case".
I'll assume OP didn't edit their comment and that I missed the word "their". Sorry :-/
Unfortunately for framework though, that’s exactly what they advertise their product to be and shame other products for not being able to do.
They sold it, it's their problem to fix. Then they can take it up with Intel if they want. That's not on the customer.
they didn't buy a chip from intel, they bought a computer from framework, and the support to make sure it works is frameworks, not intel's. framework can deal with intel.
imagine you buy a car and the electronics stop working and the manufacturer says "hey your problem is with bosch, go bug them" - you didn't buy anything from bosch, you bought a car and dealing with defective bosch parts is the manufacturer/dealer's problem, not yours.
It worked... in the Framework which is what their engineers designed it for.
So your analogy would be: I took the engine out of the car and put it in my bosch, and now it won't work.
No, the Cooler Master case is a product sold by Framework and designed exactly for the purpose of housing a Framework motherboard. It's more like if I took the engine out of my car and put it into a rolling shell that the same car company sold me specifically to put my engine into.
The OP bought both the car and the upgraded engine from Framework, who specifically advertised that upgrade path as supported.
TIL:
https://frame.work/products/cooler-master-mainboard-case
> they still went out of their way to help you
Did you... read the rest of the post after "bug in the Intel chip?" It sounds like they did not, in any way, help GP.
Helping OP troubleshoot (even though OP doesn't want to troubleshoot), seems like they are trying to help.
I avoid Intel wherever possible now, which thankfully, is almost everywhere now. Their insanely broken power management in Skylake kept Surface Pro 4 users without any ability to sleep and wake (kinda important for laptops!) for TWO YEARS.
Microsoft, to their credit here, really tried their best to patch around Intel's fundamental brokenness, but it literally did take them years to bodge up a solution to make it sort of work like it was supposed to. I only stuck it out becasue I really needed pen and touch capability.
Intel is dead to me now. And in today's AI world, Intel is irrelevant, anyway.
I’m digging into this with the team, along with comments in this post. Longevity has to include a streamlined and effective support experience in addition to the hardware being repairable.
There are several changes we made earlier this year to drastically shorten the number of back-and-forths to issuing replacement parts when submitting a support request, and we’re working to streamline that further. We’re also improving the RMA->quality->engineering pipeline to make sure we capture learnings and make fixes from field failures.
This has been an ongoing theme with frameworks support for years.
Your customer base are above average technical people, yet you insist on treating them like clueless noobs.
Thankfully, your products in general are great when they work, but so is every other brand.
> Your customer base are above average technical people, yet you insist on treating them like clueless noobs.
I have no experiences or relations with Framework whatsoever nor I intend to have, but having seen some support exchanges about products with supposedly above average technical customer base in the past I'd be willing to side with them on this particular point.
I'll just offer that I bought a Framework 13 ~4 months ago to replace a Lenovo laptop that had been flaky from the jump. Lenovo support was frustrating and useless helpping with the USB-C ports constantly dropping connectivity (I suspect a design flaw and overheating nearby) on the still in warranty laptop. So, in my n=1, the big guys support isn't great either.
So far, I'm happy with my Framework purchase... but haven't needed any support yet.
Lenovo support is atrocious. 3 months to get a laptop fixed isn't great, but it took Lenovo over 1 year to fix my broken on arrival thinkpad. 80+ hours (conservative estimate) of talking to their support staff over the phone, and many times shipping the machine to them, only to have it come back with the same issue or a new issue. Honestly with the time it took to get the laptop fixed it would've made more sense just to throw the thing in the trash and do some extra contact work.
I can't imagine how frustrating the experience would've been had I not had another machine to use for work.
Also their business practices seem extremely sketchy to me, one of the first things I asked when it arrived broken was if I could return it for a refund. They refused claiming that the return window had expired, and the window does not start when you receive the item, but instead when you order it (it took ~4 months after order to ship to me).
It was a real learning experience. Now I record every support conversation I have.
My hunch is that they are not big enough to support such an operation. Just my hunch. I have seen many similar posts on reddit and HN and I'm very hesitant to purchase one with my own money. I wish some company can pay me :)
I have been a part of the ThinkPad cult for 20 years now and the last model I bought (2022 P15 Gen2) has worked but is so far below the standards I am used to that I will likely not buy another. Framework was going to be my next choice but I have also seen these horror stories from time to time that don't give me a warm fuzzy, spend a month's income, feeling.
The state of hardware is about as bad as the state of software lately.
I'm wondering what other choices do we have. I tried a few Dell refurbished laptops, and none of them is particularly good -- and they both broke down after 1-2 years. Now they also hiked up the price point (almost 800-1000 CAD for one used laptop) so it doesn't make sense to subscribe to something for 400-500 CAD per year.
I do have a T470S which works perfectly well, a Macbook Pro M1 16GB and hopefully soon a Mcbook Pro 2019 i7 64GB, so I'll do fine.
I was Thinkpad cult until I got the first AMD version of the framework 13 and just another anecdotal data point, it's been flawless. I've done two screen upgrades, one main board upgrade, and one keyboard replacement because I wanted a cool unlabeled transparent keyboard. I'm on the waiting list for the 13 pro chassis set as well.
I have interacted with support before when a usbc thing I got was bunk. Two emails, and then they sent a replacement. Support might be better in Taiwan though, for all I know. Certainly shipping is fast here...
They are absolutely big enough to not have support suck in the manner described in TFA. Size is not an excuse.
I am not affiliated in any way with framework (and I don’t even own framework hardware) but i’d like to offer a different perspective: support is an expensive part of the business, with an unpredictable volume of work, for which hiring can often be “hard”.
If you need to have strong technical people in support, you’ll be overspending in salaries for people that will likely move fairly soon to better positions (a lot of tech people started in support, i did myself).
If otherwise you don’t spend enough you get to keep the books in check but then you have support people that are not very technical and mostly read from a script.
And there are a ton of other things that happen behind the curtains as well.
Support seem easy but trust me, it isn’t.
I have extensive support experience, you're right, support is not easy, that said, there is a very easy win: hire enthusiastic support staff that are overqualified. Customers don't like slow support but slow support is forgivable if it is good support. Framework's support as described in the post is a disaster, the worst type of support. Bad support compounds: if your support agents are doing the bare minimum to move a ticket along, they're pissing off customers and missing insight that would be valuable to the teams responsible. A customer support team of 2 technical people will deliver more for the company than a customer support team of 10 untrained people.
The quick fix for any company in this situation is to require that technical people across the company take responsibility for customer support. Of course, they don't want to, hardware designers and software engineers can't imagine anything worse, but they've got to be exposed to how real customers are experiencing their work to have any hope of doing a good job. The exposure can be direct (in a crisis) or indirect (through technical support staff relaying).
If I were the Framework CEO, I'd be taking over customer support myself. A nightmare, but necessary to understand why their support is so bad.
I have been a chief developer of a large service (think millions of daily users) and I had a habit of opening the support inbox and replying to users. In a typical evening hour I would clear the inbox and successfully resolve a mountain of tickets. Not to mention the important insight I was collecting from real users' feedback and real bug reports.
And this is how it should be: an enthusiastic developer can churn support tickets in their free time much much faster than dedicated support staff does full time.
You're doing the lord's work
> The quick fix for any company in this situation is to require that technical people across the company take responsibility for customer support.
I like your idea but I can also imagine that quite a few technical people will not have the necessary communication skills for being in customer support. They will need additional training if you want to unleash them onto your paying customers.
This ^
> Bad support compounds
Louder for the people on the back
In the same way a bad medical diagnosis makes things harder later on, or bad legal advice, etc
But especially in the "silly" cases, this is extra disappointing. The case in TFA is not "you're holding it wrong" or "weird technical bug that happens once in a very while", it's a very clear issue of "should do A and it doesn't"
I agree that support is hard.
Since you seem to have experience with this, the principle that I've seen work "best" in my own limited experience (and I wonder how it matches with your experience) is to keep the barriers between support and product development as low as possible:
1. keep the company as small as possible in general (which lowers all communication barriers everywhere, and helps with cash flow—fewer salaries, smaller office, low overhead)
2. Early on, have the same engineers doing product development and support. Later, have heavy, regular communication between the teams (including managers and senior ICs on both sides. Maybe rotating the managers would work? I don't know. Once you have more than one level, I don't know anymore, but maybe do the same thing with directors and senior managers?). This hurts growth, because you're understaffed to begin with, and you're impeding the staff you have by giving them tons of unplanned support work. But IME it means that product development is happening at the right level of abstraction.
If the product you're building requires big company support (or training or product development), and the revenue it brings in can only support a small company, then you should change what you're building. It's very hard to change what you're building if the company is very big.
So if, for example, support is boiling because your product is flaky, and engineering is too small and too busy to fix all the problems at a reasonable pace, you probably have a design problem(s) and expanding will make it more entrenched. Instead, you should simplify the product. Then expand (with an understanding of the real costs of different parts of your vision), and repeat.
Developing cold fusion is hard. Support is a solved problem that companies fuck up because they don't want to spend the money to do it properly.
It being hard is no excuse for not doing it. Building long bridges is hard, doing surgery is hard. Creating a new computer company is hard. That doesn’t excuse you having a support organization that costs the company’s reputation and future viability.
No company comes to mind in terms of paying support people well.
This is unfortunate because, especially for technical folk, support interaction is the backbone of user experience.
If they could innovate here a lot of things could be overlooked. Costco + early Amazon often did this pretty well tho.
A company can get away with paying their support team entry-level salaries by fostering a healthy (and dare I even say fun?) workplace culture.
One of my early jobs was working in support for a web-hosting company just after the dot-com boom. They did a lot of things wrong (or at least cheap), but they also got a lot right, especially their support teams. They understood that customer service is the face and reputation of any business, not just a cost center.
They provided good training, fostered a positive atmosphere in a variety of ways (important when your job is a constant stream of unhappy customers), and supplied a lot of free food and company outings. I wouldn't say it was an _awesome_ job, but it was a good one, especially for where I was at the time. There certainly are parts of it I miss. (Mainly some of the unique characters I got to work with. It feels like everyone in modern tech companies all have the same personality.)
apple do a reasonably good job of paying support staff well enough that the support quality in person is decent.
This is the primary reason i buy used iphones - someone else pays the apple tax, i take the phone to apple and for a reasonable price, i get a new battery and i keep the value of the phone and battery for around six years. No other phone manufacturer offers that proposition.
I also chat with the apple staff while i wait and they are paid decent wages. I certainly think they deserve higher wages, but their wages are not bottom of the barrel. The strongest evidence is that staff turnover is relatively low.
I have a counterexample, from a small company, Gong galaxy. The support is genuinely helpful, have more knowledge than anybody should expect, and is fast to respond. Even when the mistake was clearly mine they replaced the equipment I broke, and tbh, I felt like talking to the sales team each time I contacted support (and once I thought I talked to a fiberglas/epoxy expert). And I know it's not only me, a friend has had the exact same experience.
I wonder if it's because it is a small enough team that they have the correct person respond to support calls each time, but it was the best experience I ever had.
With my support experience there was a lot of inefficiency in communications. They could save a lot of time with a form that asks for some standard information.
Also I had to make videos and photos and then email them which couldn't handle large files so I had to organise my own hosting and share links.
Basically they don't seem to have thought it through yet
Not only is support not easy, it is increasingly expensive.
Products are priced and launched with an initial BOM cost and anticipated labor cost for repairs. Prior to the AI buyout, service and support was already running into real issues with the costs of labor increasing very quickly. Now, the cost of service parts has also skyrocketed. This means that the initial overhead in the cost of the machine is no longer able to cover the intended dollars put aside for repair.
This is not just happening in computers. This is everywhere. Support and service were struggling everywhere coming out of COVID, prior to the jump in component costs due to labor. Now it is a bloodbath as logistics costs have also jumped due to fuel costs. Add into this that the vast majority of manufacturers build in lower-cost labor environments, but repair generally happens locally near customers. In these situations they are facing repairs that can cost more than building a new machine.
The future of support is going to be grim for the coming years.
From my arm chair, I wonder if they should have just asked him to return the broken laptop and send him a new one. This way, one of their experts can have a high bandwidth experience with device in a lab.
I had a similar issue with Apple once and that was their recommendation (as it was within their return window).
It is not easy. However, it is necessary to get it right regardless.
Apologies if you already know all this, but perhaps you've heard of the example of eMachines, an initially much-maligned vendor of "free" PCs in the dotcom bubble. Their product was janky and it showed, but they eventually turned it around. A big part of it was that they chose to colocate their support folks with their engineering team (I read somewhere they'd have support peeps sitting right next to engineers) and made a rigorous, concerted effort to turn every support call into a product improvement where practical. Their products just got better and better and their reputation recovered.
Perhaps that approach isn't practical today, but maybe there are some useful threads in there to pull on.
> Support seem easy but trust me, it isn’t.
This is true of most jobs. That doesn't mean I expect companies where the job is required to routinely fail at them, mostly because they are unwilling to invest proper resources.
Framework is not unique in having shitty support. It is an absolute epidemic, which is why companies are able to get away with it. But the fact that almost everyone sucks at it doesn't mean we shouldn't call the problem out loudly when we see it.
> Your customer base are above average technical people
I think this feels like it must be true, but is it actually, in practice? Plenty of SW people don't know a ton about HW.
I recognize that maybe all those people are on Macs :)
Framework is still a very niche product. The average Joe likely wouldn't even consider it in their top 10 brand, even if they have heard of it. The SW engineer who is into framework at this stage of the company's lifecycle is definitely more likely than not an above average engineer.
A lot of average folks like to think they are above average.
Shots fired! Shields up Mr Sulu!
if you work costumer service, you'll learn very quickly to make zero assumptions about who is asking for what.
Don't let them fool you. Early 2026 I bought a 4100€ laptop from them, returned it because I didn't think it was worth the price, and they scammed me telling that I didn't return every component. First telling me RAM was missing, afterwards telling me "well there is some RAM but not all of it", without any sort of proof. Complained online, mods telling me in public "don't worry I will contact the head of support" just like nrp did, just to receive a copy pasted mail from them.
Me and my GF filed a report with every proof to mastercard for a chargeback (that framework contested), but after Mastercard investigation, they ruled in our favor.
This is a scam company. Never ever buying again.
> This is a scam company.
Malice / incompetence etc. etc.
i'm kind of surprised to see this comment. not because "oh wow the ceo is in the comments", but because your support is so difficult that it's hard to imagine it not being intentional.
I bought a chasis kit recently and the touchpad is faulty, or acting faulty ( physically getting stuck depressed), and the amount of back and forth for the serial number of part X, then Y, then firmware of Z, etc.. maybe there's a technical reason for that but i just considered myself beat into submission and gave up.
after mainboard upgrades, touchscreen upgrades, and various other upgrades over the years and being excited about framework, it's weird to have all of my enthusiasm get derailed over support for a touchpad.
I don't understand why this isn't 'alright, pack it up and ship it and we'll send you a replacement'.
This should be a case of the engineering team getting the faulty device for debug (and ideally getting all the relevant information so they can do the work with some semblance of parity with the customer's setup) -- and the other half is the customer gets a functional piece of hardware to swap in.
If Framework is worried about sending out hardware before receiving hardware, the policy is a simple one; when we get the hardware, we'll ship your replacement.
---
This is the standard 'debug over the phone' thing and engineers will do this while collecting information to try and recreate the problem you're having. It may be because the engineers are too close to the process? If you think about it, the RMA process is actually a sales process. You're essentially selling an already sold user on continuing to be a user.> I don't understand why this isn't 'alright, pack it up and ship it and we'll send you a replacement'.
Oh no. It should be "we have sent you a replacement - once it's installed and confirmed working, pack up the broken one and send us in the provided box with the provided pre-paid return label".
Best thing about Dell for example, with an enterprise contract you can overnight parts based on a machines service tag and they come with a prepaid return label, super easy and simple.
I'm fine with a middle ground - either run the support questions/tests and get the prepaid advance RMA, or say "I know what the fucking problem is, give me the advance RMA and bill me for shipping if the returned part is fine and I'm a dumbass."
In reality many people will NOT take the second option, but will be happy it was there, and the company probably never bothers billing for incorrect advance RMAs.
Exactly. Framework prides itself on its repairability, yet their support acts like any other PC manufacturer. If your stuff is so repairable, why can't I get billed the parts I know I need, and I can prove to you that this was necessary so you don't bill me?
I had exactly the same experience with the Desktop. PSU has a design fault, new units still ship with that fault a year after release, and customer support still asks for proof, offer all sorts of potential fixes to try and finally a full one hour procedure for a replacement of the part by another faulty one. Meanwhile a third party managed to design a better PSU for their product. It's astonishing. [0]
[0] https://community.frame.work/t/noisy-psu-fan/74751
First, I think it's dumb that Framework stuck a semi-generic PSU in the Desktop with a tiny little buzzy fan and no way to control it _while_ marketing the machine as nearly silent. Poor design and bad marketing.
Buuuut, I'll argue against the point that these are faulty units. Everyone gets the same PSU in their Desktop. That thread (and many others like it) are full of people claiming that their _specific_ PSU fan is loud and defective and demanding that Framework should replace it. And then are surprised when the replacement sounds exactly like the old one.
I bought the Framework Desktop anyway after reading these threads, and after owning it for almost a year, I have to say that the fan noise doesn't actually bother me. I have had laptops and desktops with FAR noisier fans that ran either constantly or intermittently so I guess I'm just thankful that modern PCs don't sound like vacuum cleaners anymore.
Could you share your support ticket or order number. I want to be able to walk through it with the team to see where we could have done better.
Why ask for this on a public forum? Every week hold a meeting with support team lead and go through 10-20 tickets they flag as problematic. Recurring issues, tickets with a lot of back and forth, dissatisfied customers - anything.
Then take action internally.
You need to touch some ground, your work doesn't end after the sale is made.
> I bought a chasis kit recently and the touchpad is faulty, or acting faulty ( physically getting stuck depressed), and the amount of back and forth for the serial number of part X, then Y, then firmware of Z, etc.. maybe there's a technical reason for that but i just considered myself beat into submission and gave up.
I've been there with Framework. It's incredibly frustrating and I wouldn't even consider buying another one of their products until they've conspicuously turned this around over an exteneded period of time.
What do you expect when the package you receive merely contains parts that were not assessed for quality, and never assembled together before ?
I'm pretty sure they assemble, test, and then disassemble DIY orders.
The boxes on the things they don't manufacture themselves like RAM and SSD are sealed.
The story in the article proves otherwise (unless it's a complete fabrication).
@nrp, I’m not the op but am the blog owner.
I tried to resolve this through support, asked for a manager, suggested a refund or replacement and ended warning I’d go public when I ran out of options to break out of the support loop hell. I didn’t anticipate this would hit HN so I feel bad for you and will unlink shortly to stop the shitstorm.
If you genuinely care about customers, fix the problem: keep the laptop we sent you and send a replacement unit which has been properly tested, basically do what anyone would expect in a similar situation.
I will still not buy new hardware nor recommend you, but at least you will have shown that you fix your mistakes and I’ll publicly acknowledge it in good faith.
Anyways, I don’t have high hopes, surprise me
For those that don't know, nrp is Framework's founder and CEO.
It’s in his HN profile, where those who wonder can see it with one click.
FWIW I am a happy Framework owner, but I have one suggestion: I think you should stop shipping disassembled laptops. Instead you should ship them assembled and QA-ed, including the Linux ones, which currently are DIY-kit-only.
It's a bit fun the first time to assemble from scratch, but it's annoying the second time, and it would mean you know the laptops actually work when they get sent out! The article's issue for example would've been caught if someone had assembled the laptop and powered it on, and not then disassembled it again for the experience of assembling a DIY laptop kit. My understanding is that this is actually the process Framework uses — that is, assembling and then disassembling — and I can't imagine disassembling has a zero percent fault rate, nor does asking the customer to re-assemble.
Your laptops are really nice and I want you to succeed. There's a reason everyone else ships assembled laptops though, and I think you should do it too. It wouldn't harm repairability, or compromise your principles: I think it would just reduce churn and support tickets from broken parts and laptops, and reduce customer frustration.
I saw a BTS video they made that showed they actually assembled the full computer and then disassembled it to ensure this exact issue.
You'd think that would make the disassembled version more expensive to produce.
The 13 Pro comes with a fully assembled and tested Ubuntu one, priced under the DIY. They really don't want you to DIY these days.
The treatment of the article author is the same treatment that I experienced with my launch Framework. Framework customer support is absolutely horrid and I had to fight for a month to get the input cover replaced along with ridiculous steps to prove that it was faulty. This was back in 2022. Nothing has changed in four years.
Editing this to add on: A firmware update bricked the TPM functionality somehow. :D
Unfortunately this is the nth story that shares the same thing. It feels like it's done on purpose and it works. I gave up on my faulty screen replacement as the back and forth became so long and the warranty expired.
I love everything about framework as a company, but the approach to customer support has left a very sour taste.
To me, how a company handles returns and customers who are having difficulty says far more about that company than whether their products are cool or their technology is advanced. The only companies I have sworn off ever doing business with, they all had terrible, hostile, or indifferent customer support.
Could you share your ticket number or order number so that I can walk through it with the team and see what we needed to do differently?
Thanks, #R743331329. To be clear I stopped replying and let it die, but the burden of proof for a clearly faulty display was unreasonable
a lot of negativity in the comments but i just want to say thank you for your efforts and your willingness to listen to the community. i have no doubt running a company like framework is extremely hard. i hope you guys continue to build great products for many decades to come.
I'm not affiliated, but I think it's important to contextualise those complaints within all the lack of complaints you don't ever hear about. Any story can seem big.
Thank you for seriously considering improvements to the support. I've been in need for a new Laptop to replace my old 2008-ish laptop and I am considering forking over the 3000 EUR or so for my desired configuration of a framework laptop, and reliability/support is on the top of my buying-criteria.
As I have experience working customer support in IT for a few years, I know good support is both hard and time-consuming. Systemic change is hard too. And to add to the list of difficult to impossible tasks: Staying always truthfull, while providing helpfull support-replies is like near-impossible for most organisations.
Best of success for your endeavours!
Gotta be real here, this isn't a "wow, what a weird one-off" situation, Framework support is absolute garbage-tier holistically and by design.
I love your company's philosophy. I love your products. I am typing this comment on a 13 Pro, and I own two other 13s. I've upgraded the display in one, and I've sold an empty case off to someone who had a motherboard that they wanted to turn into a whole system. It's all great.
But when something goes wrong (like the motherboard that caused me to have an empty case in the first place), the experience is so deeply unpleasant that it makes me mad all over again thinking about how absolutely useless the support is, and how much process and rigmarole they make you go through. "Take your system apart to do this annoying thing." nope, didn't fix it "Okay, now take it apart in a slightly different way to do this other annoying thing." Repeat over and over for many cycles until finally "sorry, we're not going to actually do anything to help you, even though there are many other people on forums reporting this exact same problem indicating a defect."
If you look at the r/framework Reddit, like half the posts there are people being angry about support. It's genuinely bad, and a real problem for your company. Which sucks, because the products are so great and deserve premium support.
Since we're talking framework keyboards, mine likes to hold down the arrow keys randomly when I'm using them to scroll through text (as if the key thinks its still held down). I didn't buy it from you directly, so I can't really open a support ticket.
You can open a support ticket regardless. The original warranty would transfer on resale, but out of warranty, we still provide support/guidance on debugging or what part could need to be replaced.
Okay, this is the kind of thing where I think you need to have a better picture of what your customers want. "We'll provide guidance on debugging even out of warranty" sounds really nice, but here's what it means in practice: The support people are going to have you do a lot of very difficult debugging steps, along the lines of what this blog post talks about -- disassemble this, take a picture of that, reset this other thing. And they're going to do it one step at a time, so that every time you do one of these annoying tasks, 15 minutes later they'll send you another piece of homework involving major laptop surgery.
And this will go on for many, many steps. And when you finally get to the end of it, they'll say "sorry, you'll need to replace this keyboard, and it's out of warranty, so you'll need to pay for it yourself" and you'll have spent many hours over a period of weeks just to get the answer that you were 95% certain you were going to get in the first place.
It is true that they were out of warranty and couldn't reasonably expect a free keyboard. It is true that your support helped them identify that the keyboard was the issue, so it was a successful diagnostic in some sense. But the experience for the customer is super terrible and infuriating.
What would you want as a customer in that situation? What I'd want is to get an email like "Hey, I'm really sorry you're having that problem. As you probably know, you're out of warranty. There's a pretty good chance that you're going to just have to replace the keyboard, but if you're interested in trying to debug it to make sure the keyboard is the problem, we're happy to work with you on that." And then if I did want the debugging, I'd love to get a single document containing the debug steps that I could work through in one sitting.
That's why I think your insistence on "let me see your case to identify if any steps were done wrong here" is off-point. The problem isn't any particular debugging step or any individual case, it's that your whole process is fucked and customer-hostile in its conception.
I bought a Framework 13 Pro this year, it's absolutely sick, amazing machine, love it.
Given the near unanimity of negative feedback, I’d consider something more drastic/effective than this, nrp.
A drastic step, in the sense that it would require an effort, which could be made would be to repair or replace the defective 11th gen motherboards.
Just a little background: https://www.youtube.com/watch?v=6UUOyGd5UkU
Unanimity? It's not like people make blog posts that front page HN about good support stories.
Yes, but usually when a company has good support with exceptional instances of bad support, a single complaint getting to the front page doesn't get a pile of other people saying "holy shit yes, their support is so terrible" and does get people saying "wow, my experience couldn't have been more different, some of the best support I ever got."
Most people don't need support to be fair.
The fact that an LLM-submission is being upvoted so much, is because it is news (unusual).
> There are several changes we made earlier this year to drastically shorten the number of back-and-forths
Given that this encounter was super recent, it must have been even worse. Hard to imagine.
Gonna replace all those defective motherboards with 11th gen Intel processors that you refused to repair or replace before?
Off the topic, but I love my framework!
When you will start shipping worldwide, or allow to order with delivery services? I am writing to support with this for years. You dont need money it seems.
Shipping somewhere isn't that easy. You need to make sure you get your accounting done correctly with all the tax laws of every country you sell to etc.
It's not like selling to a country is just changing the address on the label...
If your support process is this awful now and you dramatically improved it already this year, one can only imagine how beyond hellish it was before. Or you're in extreme denial about successful your changes have been.
I'm rooting for you guys. Framework is a great concept and I want it to succeed. Good luck.
We're improving, and we're never going to stop improving. Partially, the expectations customers have for us are correctly higher for us in 2026 after five years of building and shipping products than in 2021 at our first launch.
Please do, so that the 'support' side quest doesn’t stain the main one: great, open engineering.
Thing is, support is not a side quest. It's make or break for a company.
> There are several changes we made earlier this year to drastically shorten the number of back-and-forths to issuing replacement parts when submitting a support request
Really? This was the drastically improved process? :D
"Reduce the number of back and forths" look, I know that support is hard and thankless
But it sounds like the process is not working here. Support people were not identifying the glaring issues, even with the keyboard at hand
This does not inspire confidence
to be honest, it sounds they had issues with e-mail threading/ticket system problems.
Are we sure they were people?
nrp, do you employ IT helpdesk software that is ITIL compliant?
Thanks Nirav, I trust you’ll take this seriously.
What is your support story for those who don’t make the HN front page?
Words. And words too late, at that.
I'm not a framework customer but am EXACTLY the target demo, and between this and the other horror stories I'm taking real, customer experiences to heart and not ordering your product.
This shouldn't just be you posting in an HN thread, this should be a "We fucked up. We know we fucked up. Here are all of the things we're going to do to never, ever, ever fuck up like this again."
This reads as "We know things aren't great and we're working to improve, have patience"
Nah, fuck that. On a multi-thousand dollar system patience for shit like the issue OP is reporting is exactly none.
You can choose not to buy it but have some perspective. This is a reddit tier hate comment. They are a small company working in a difficult space for small companies.
From my experience, small companies tend to have the better support because they don’t outsource and know and care about their product, and care about quality support exactly because it’s a difficult space and good support gets and keeps customers. That doesn’t seem to be the case here.
Yep, agree. But in this case is laptop hardware. The fact a small company is able to compete with products remotely similar to the like of Dell, HP, etc is pretty incredible to me.
Agree support leaves a lot to be desired based on this thread, but the gp I responded to was overly harsh, particularly when they aren't even a customer themselves.
This isn’t the first time; serious issues with Framework’s support have been reported for a long time. I therefore agree with the GP and wouldn’t buy a Framework product, especially since the upgradability/repairability/sustainability aspect kind of requires good customer support. One doesn’t need to be an existing customer to come to that conclusion.
Yeah, I probably should've linked to past stories so I didn't get downvoted to hell. c'est la vie.
I don't see how that is an excuse? I agree there shouldn't be an expectation for perfect service, but I expect some proportionality to how much I spent on a product.
my framework laptop arrived with a broken lcd. they only accepted my claim once I provided significant photographic evidence, and then dispatched a replacement screen. the entire process took around 2 months from initial delivery (including shipping of the replacement part). Is it a "hate comment" to complain I want better service after I had already spent ~£4k on the device?
Realistically the level of support you can expect is proportional to the markup on the product, not the price that you paid. Running a lot of RMAs on a product that's expensive to produce and doesn't sell at a price that's much higher is a good way to go out of business as well.
I got an IBM support contract for my old T61.
I did have a hardware failure. Reported it. NEXT DAY they sent a tech to meet me at my house, and did the repair right there, parts in hand.
Am I expecting 1 day turnaround for Framework? No. But the runaround and multiple months delays is a very common complaint.
If I had bought from them with these failures on arrival, I'd be charge backing and opening up a small claims suit.
A small company isn't a reason to expect these pains on a high-end product, if anything, it's a reason to expect support to be better.
I'm all for supporting small business, but a business being small doesn't mean it's good or ethical.
Let me give a good example: A few years back SCANOSS, a company that I believe had 50 or so employees at the time, made a github bot that opened a ton of tickets on repos with swear words in the source telling them to remove them. Obviously, pretty much every projcet that got these had the same "Fuck off" response, because, like, it's their free work up for public use, not there for a business to police, let alone by a bot.
SCANOSS's response would matter a lot in how this is remembered though. They could've said "Our bad, that violated TOS, we messed up, it'll never happen again"
That's not what happened. Instead, the CEO clapped back with this,
""" Our experiment was based on issuing automatic contributions to some components using bad language (detecting and suggesting the removal of such language). The purpose? Contributing to the adoption of those Open Source components. For your information, bad language is banned in most organizations and, therefore, if you are interested in having adoption of your Open Source, it is good practice to avoid such language.
We really don’t need to put any mechanisms in place for this not to happen again. This isn’t something we do on a regular basis and, as I mentioned, anyone could contribute to any repo as long as it adheres to Github’s ToS.
If you are not willing to receive contributions from the community, if you are not interested in your Open Source contribution gaining adoption, or if you prefer people to sign special agreements to make contributions, perhaps you are better off closing down your repository, making it private.
Hope this helps. Ciao! """
Now, this story continues - you can go read the full drama at https://opguides.info/posts/scanoss/ - but that's not the point. The point is the response is what mattered. I don't care if it's Google or Mom & Pop Software Co., the communication matters.
The response here, to me, given the sheer amount of frustration they caused for OP, while not on that level of SCANOSS CEO level of tone-deaf, reads to me like damage control, not damage acceptance. That's why I said "Words.". That's what it reads as, to me, is trying to damage control via words. Sure, he says they're improving processes, but this is one of many Framework horror stories I've read over the last year, all from HN, all with this same divide of praise/defense for Framework and people saying "Yeah, I've been burned".
If they're improving processes, they need to it faster, and until it's under control, make communication channels absolutely top tier. Not bounce arround to multiple support agents. What happened here isn't something that should ever, ever have been able to happen in the first place on a multi-thousand dollar machine. Any response short of "Holy shit, I am so sorry, I will PERSONALLY be handling this, here are all the concrete steps we're doing, here's a blog post about all the things we're doing, with dates of review for follow though" isn't enough.
This isn't a hate comment to the CEO's response here, it's a comment I think that's adequately reflective of the fact that it's still a company and they're clearly not doing good enough.
If it's a difficult space, then this isn't the way to win.
"Difficult" space is bullshit. It's customer support, not heart surgery.
I'm sorry that you don't think people have a right to want better service with expensive hardware and to advocate to a public-facing CEO making a bad apology for some vague version of functional customer support, but it's frankly fucking weird to get on here and shame them for it.
Of course, tone policing by comparison to reddit.
No, you get a 3000 euro botique laptop that's DOA, and get strung months? Fuck that and fuck anybody responsible who thinks that's even remotely acceptable.
My wife was needing a good laptop. I chose NOT framework. I read 3 other times of the same type of runaround.
Once is a one-off. 3x is corporate policy. And of course the CEO showed up and 'looking into it'. I'm sure that effort will last as long as it's on the HN front page. Worthless half-promises aren't proof.
I'll revaluate Framework in a year or 2. They might truly mean it and fix their problems. But I'll let others take that chance.
> I'm not a framework customer but am EXACTLY the target demo, and between this and the other horror stories I'm taking real, customer experiences to heart and not ordering your product.
There may be (valid) "horror stories", but what percentage of cases do they represent? (Nobody notices when things go right.)
Most people who are happy with a product don't write blog posts about it, so you'll tend to only hear horror stories. My work gave me a Framework and it's been great for years. I bought a Framework 13 for personal use and had no issues. My only criticism is that they have translucent bezels, keyboards, & expansion cards, but no translucent case for the chassis.
Also it seems to me that if the author of this blog post was so upset, he could at least take the time to write it himself. Pangram says it's 56% AI.[1]
1. https://www.pangram.com/history/78c0efb8-fb27-4e59-b41b-c646...
The hardware is great. The support is terrible. If you haven't dealt with the support, you're dealing with the good part, and not the terrible part.
There are basically no stories about good support, except for people whose issues were the ones caught on the first 1-2 steps of their 47-step support scripts, and who don't realize what was in wait for them if they weren't lucky.
Three months ago, we had https://news.ycombinator.com/item?id=49345220. Framework bricked my laptop with a recommended BIOS update and said it wasn't their problem because warranty ended, and that I had to buy a whole new motherboard from their store. This feels like the same treatment. I had to figure out how to fix it myself without any help from Framework.
After it got to the front page of HN, Framework promised action when asked by Ars Technica. Three months later, people are still getting their laptops bricked and writing about it on their forums, and the promised fix to add BIOS flash recovery and making bricking impossible still hasn't been released...
People have been complaining about Framework's support practices for years and even their investor (Linus Sebastian) has done "secret shopper" on their laptops and run into issues, and the response has always been "we'll do better." I am just not seeing the improvements.
I want there to be a good repairable laptop, but the company has to follow through on their promises and treat their customers right.
We are replacing those Mainboards outside of warranty currently, and we should have from the start.
We've also started deploying the BIOS recovery firmware functionality platform by platform. So far we've released it for Framework Desktop, Framework Laptop 12, the Intel Framework Laptop 13 Pro, and the Framework Laptop 16 with Ryzen AI 300 Series. The remaining platforms are all in progress and should be ready by the end of the year.
> I want there to be a good repairable laptop, but the company has to follow through on their promises and treat their customers right.
so just buy a popular model from any popular brand... my ~ 300 usd Acer gaming laptop is pratically modular (running > 5 hours per day since 2020 with no error or stuff breaking so far) except the keyboard, which any mobile repair shop can do the job as they have the tools! spare parts are cheap, easy to find and easy to scrape - Framework is just marketing for USA/EU demographics that can pay a premium and never thought that using the money for a future repair with scrapped parts of a popular model will be cheaper in the long run and probably greener
Thanks and a good lesson in why buying into hype after something hits frontpage on HN doesn't signal anything beyond hype.
Hardware is tough tho. I commend those that are finally admitting the issues at hand. I will stick to established manufacturers.
I love my Framework 13 to death to the point that I cannot see myself buying any other laptop, but I gotta say, Framework really have to up their QA and customer service game. We also decided to use Framework laptop at work, and we had several with issues. Mine has a broken webcam module and came with a whiny high pitch CPU fan. I did not care for the webcam (hey, can't hack something that doesn't work), but the CPU fan was incredibly annoying. I had to do several rounds of email with Framework support before they send me the replacement part. And we are based in E.U so we have the automatic 2-year guarantee. Idk if it would have been possible outside of the E.U.
I really love the module system, the screen ratio, the linux support, the 180° hinge. But I think it is fair that the frequent QA problem is a dealbreaker for a lot of people (especially at the price point that they ask). For me, as long as they don't fix this, it will mean that Framework stays a niche manufacturer for enthusiast.
Could you share your order number or support ticket number? I want to use these to walk through with the team to determine how we can do better.
I wish they had posted the short story instead of having AI expand it into this formulaic multi-section prose (Pangram agrees), but the frustrations in this story sound too familiar. Framework is a company whose mission I support and I want to succeed, but I know too many people who have had negative experiences like this.
Making entire computers is hard, and making then upgradeable is even harder. Getting warranty work and customer support right is table stakes for selling a computer, though.
It's annoying that what should have been a human telling a story has got turned into tortured llm prose, it's hard to have any sympathy for the author when it's viewed through the claude-lens.
Reading llm text makes me dizzy, literally in some cases. I dont want to even flip through them.
Years ago I had a MacBook Pro that kept having screen glitches. I was pretty sure it was something in the discreet graphics card or between the card and the screen because it didn't happen all the time.
Apple tried twice to fix it, but the same problem kept coming back. Replaced the screen, then the card. The third time I brought it back to the store, the genius looked at my repair history, took my two-year old laptop, walked to the back of the store, and brought out a brand new MacBook Pro in the box, wrapped. He apologized for the inconvenience and let me know that my AppleCare subscription restarted from day one with this new laptop, so it was covered for the next three years. (Happy to say I never had to use it with the new one.)
That's customer service, but it's also realizing after a while, it may be cheaper in the long run to throw it away and start fresh.
What would actually be cheaper is to fix the real problem. To do that you need to find the problem first rather than firing the parts cannon. But it seems that diagnosis is a lost art these days.
Why waste so much time with support? It should have been clear after week 1 that they aren't interested in helping you.
Consumer protection laws exist for a reason. Collect all the documentation and file a chargeback. This is the only way the problem will actually get escalated.
A chargeback burns every bridge, and will ultimately get denied if the company provided the good in return for the money. If you start talking about consumer protection laws, the credit company will tell you that this is a matter for civil courts; their "jurisdiction" is just ensuring that charges were authorized and the goods or services were provided.
It is somewhat unfortunate that "chargebacks", like "talk to the manager", have become cheatcodes because their genuine utility has gotten drowned out by a flood of mis/ab-use.
My experience with chargebacks is rather limited, and always through Amex, but when I received a product that did not work as expected/advertised and their support team denied a refund/replacement Amex was more than happy to give me my money back.
I'm sure there is misuse but if the good you receive in return for the money is non-functional, I think a chargeback is the appropriate step if support decides they aren't interested in fixing the problem themselves.
Sounds like OP doesn't care to maintain the bridge with Framework.
Sure, chargebacks can be abused but what about OP suggests that’s happening here? They spent over three months troubleshooting, exchanged thirty support emails, supplied photos, videos and reproducible diagnostics, tried replacement parts, and sent the laptop to Framework's repair center. They also explicitly asked for replacement parts or a refund back months ago.
A working laptop was paid for and a broken one was delivered. That's a completely valid use of a chargeback. Especially with evidence of being refused a replacement
In some places the consumer protection or fairness in markets laws require that what is sold doesn't just physically exist, but that it arrives to the customer in a suitable state sufficient for the use for which it was sold. It's a crazy idea, I know.
Consumer protection laws are usually weaker when buying as a business.
Even the weaker version should allow you to demand a replacement or repair if they send you a faulty product. Is there any country that requires you to do troubleshooting for the seller?
Yeah, at least in germany (so I assume it would be similar in france), you just tell them to send you a new one if the one they send you is faulty. It's not your job to troubleshoot their stuff if it doesn't work like it should.
The experience in the post is unfortunate and clearly something for Framework to investigate.
However, I've been running a Framework 13 for two years, and it's the best device I've ever owned.
3 months ago I dumped a full glass of water directly on the device and kissed my $3K laptop goodbye in my heart.
Powered it off instantly, let it dry, and headed to a well reviewed repair shop in my area the next day.
He called me back the next morning and said it was working perfectly (minus one lost USB C add-on thing.)
He took it completely apart, cleaned it thoroughly, etc and made the comment that he was shocked how easy it was.
A few months later, I am experiencing some degraded cooling performance that I think is related to the incident, so I'm ordering some replacement cooling pads and plan on reapplying them myself.
Overall, I'm completely happy with my purchase and highly recommend them.
PS - Linux support is absolutely amazing. Been running NixOS from day one with 0 issues whatsoever.
Edit: I totally forgot that the keyboard that came with the kit to assemble the laptop when I bought it had some issues out of the box. Framework support quickly sent me another one, and it was here within a week. It has worked perfectly since, so my only support experience went very well.
Have also had a gen 1 13 inch laptop, with an upgraded main board running Fedora for 4 years and it has easily been the best laptop I've ever had.
A business should have trashed it or returned it and moved on, the "support" is specifically designed to waste time and frustrate people into giving up as you found. It's the same at more or less all companies, the consumer facing support is a veneer, it doesn't actually exist. I don't understand why the developer would have been "without a laptop" given it could have been replaced in under an hour, you don't even have to go to a store you can get someone on Uber Eats to pick up a functional laptop, unless this is just stuff a LLM added for flavor. If this was anything more than a brief annoyance I don't understand how you're running a company.
Exactly: Something breaks within the return window - return it, don't gamble with support.
You can assume that people that at least somewhat value the sustainability aspect of the product would choose the, well, sustainable approach to repair.
Too bad being wasteful and short-tempered usually works better.
The manufacturer is probably better equiped to figure out the problem and fix it, than OP is while playing phone/email tag.
Spending hours of OP's time seems more wasteful than shipping two small items to me.
Yup, and good businesses pay for extended warranties and fast on-site support that normal consumers would never consider, because an employee without a laptop is an unproductive one.
I've never understood this. I used to work for a small company, and even there it was cheaper to have a couple of spare PCs than pay for the expensive support, and it got people back to work faster.
Those support contracts are often designed to be "thrown in" to sweeten a big deal, or let satellite offices manage things easier.
They're often "not worth it" for things like laptops (where in a pinch you can grab one at Walmart) but for servers or other one-offs even small businesses can get value from it.
I had a really awful experience with support, too. Round and round in circles, ignoring key parts of my messages. Replaced a perfectly healthy motherboard because that's what the script / AI said to do.
Despite them denying it when I directly asked, there HAS to be some AI element to the support responses. Maybe it's not full "AI support agent", but at the very least the support staff get a few auto generated answers to choose from and are just skim reading and clicking.
I really like the Framework Desktop but I will also seriously think twice before buying anything else from them in the future...
It's not an AI issue: It's a management / competency issue:
I suspect company leadership isn't paying close enough attention to their support issues; and is treating it as "nrp's problem" instead of supporting them, or otherwise identifying (and rectifying) a competence gap.
Could you share your order or ticket number for me to talk through with the team? I want to use these to improve our support processes.
Personal anecdote: I preordered a framework 13 pro explicitly to serve as a linux dev station.
It's my favorite laptop of all time. I've had more than a dozen over my lifetime.
--
Before that I was using a Framework 12 as my daily driver. It's great too.
Literally my only grumble is that the 12 had an option for a Korean keyboard, while the 13pro does not.
I have a Framework 13. I really like it, and I would buy Framework hardware again. But I also wouldn't buy one for an engineer at my company to use as a daily driver in a world where the MacBook Pro exists. I think this misreads where Framework is in its stage of development.
Could you elaborate on that, if you don't mind? I was thinking about either getting the 13 Pro or a second-hand M2 with Asahi and this would help me decide.
Not OP but a developer not working is going to much more expensive in loss of productivity than whatever you save in having modular hardware or cool points.
Repairability is fine, but when working at the scale that you even have a handful or employees and no dedicated IT or even slightly larger than that the hardware shouldn't be a work stoppage, so having hot spares for folks to be swapped immediately and having higher quality machines pays off very quickly.
Mac laptops are some of the highest quality longest last laptops I've worked with, I ran my 2015 mbp into the ground, it still works and was fine with Linux on it after all these years, but it made it a no brainer for me to get a Neo this year, if I get a decade out of this guy as well I will be happy.
Not OP but Apple hardware is very reliable, they have been doing hardware for decades, they control everything in their supply chain and design devices all the way from the silicon to the software. They also tend to use quality parts for all components, even the ones that don't draw attention in the reviews and that other manufacturer might cheap out on.
On top of that customer support is very good usually. You just call them or go to a store and they will offer a solution, but it could get very expensive if you are out of warranty, that's really the biggest downside. As a work machine for a business its something will just work out of the box and continue to work for years with very little maintenance, makes a lot of sense as a business decision.
The MBP is physically robust and I don't have to apply any effort to keep it running perfectly. It just works. (To be clear I use MacOS on it.)
It takes time and effort to keep Linux running smoothly on my Framework. I don't feel as confident about throwing the Framework in a backpack and traveling with it. I don't expect it to take as much physical abuse over time.
I haven't had any Linux stability or compatibility problems on mine, just terrible standby battery life. Like worse than my 10 year old Thinkpad X1 which also runs Linux.
What do you think to the new framework pro models?
My battery experience is similar. I have not tried to improve/troubleshoot it, since it isn't an issue for my pattern of use.
Note that M2+Asahi works really well and I can highly recommend to try it. However, battery life time is significantly shorter than with MacOS and there was no sleep mode. I wrote a blog post a few months ago: https://navigatone.com/2026/03/21/asahi-linux-for-daily-usag...
What if the engineer wants to use the keyboard?
You're commenting on an article about how framework couldn't fix a completely defective (not just fragile desing) keyboard through months of support, and a visit to their own repair center.
Apple meanwhile fixed their keyboard issues last decade.
You’re about five years too late with this joke.
Macbook keyboards might not be outright faulty anymore, but they still kinda suck. Over the past ~year I've used a 6 year old Microsoft Surface laptop, a brand new M5 Macbook Pro, and a ~4 year old HP, and enjoy the Macbook's keyboard by far the least of the bunch.
ultra-low-travel-distance keyboards are an acquired taste, but I think using them exclusively for long enough has caused my opinions to flip to thinking all keyboards (even desktop ones) should be made more like them
the most notorious keyboard was the 2016 MacBook Pro's butterfly mechanism, so possibly even a decade late
Well sure, if you're willing to use MacOS.
But Linux sucks on the Mac. It still doesn't support sleep.
The best thing I can say about MacOS is that it’s okay. But when you’re aware that Windows exists MacOS starts to look pretty good by comparison. Still, Debian would be my first choice. But any time I look at the options the Mac hardware makes me go with Apple.
I have a Framework 16 that I'm pretty happy with overall (running Fedora). However - I did also have an issue with the keyboard at some point which took longer than expected to resolve. It stopped working, and it was also harder than expected to arrange a replacement (multiple back & forths, time-consuming video & photographic evidence I needed to provide, etc.). However, I did eventually get a new keyboard module, and have had no issues with the hardware other than that in 2.5y of ownership.
Overall, whilst customer support wasn't to the standard of their hardware in my interaction with them, it also wasn't terrible (certainly better than some of the larger manufacturers). That doesn't mean it shouldn't improve; it is a part of the purchase experience, as much so as the website, purchase process and the hardware itself - and currently it is a level below those other aspects. I think a big part of the unhappiness in this post & thread is that a lot of buyers feel like they placed trust in a small, new company & concept - but Framework support isn't trusting them back when they say something isn't working.
Overall, I'm still happy with my purchase & would purchase again. I mention this as a counterpoint for anyone considering Framework for their next laptop.
I'm glad to hear it was resolved, but could you share your ticket number or order number so that I can walk through it with the team and see how we could have gotten you up and running faster?
If anyone is interested, I had a recent framework 13 pro and a mainboard issue.
They did offer replacement after about 4 emails.
I am a bit surprised a fault this bad couldn’t be caught during QA. But they’re also a small company and I’m just waiting now for my replacement to come. May be more on intel’s side too than them.
More details on my issue here https://community.frame.work/t/laptop-13-pro-core-ultra-x7-3...
The support experience described here mirrors mine pretty closely.
Endless run-arounds, demands for information that has already been provided, and attempts to troubleshoot things that are clearly not the problem.
I had a Framework laptop that was at least functional for a few months. I didn't use it heavily. I took it to a meeting where I needed a laptop for note taking and... it just wouldn't boot, randomly.
I had to threaten to take them to small claims court in my jurisdiction if they did not immediately accept a return and refund what I paid. They ultimately yielded.
Well that sucks. I had the opposite experience, for what it's worth: new screen, new hinges, very little hassle. They also helped me resolve an issue with the touchpad myself (tightening factory installed screws, iirc), and years later reassured me regarding steps for the BIOS update process.
(This was something like the third batch of the original laptop, don't mean to suggest out of the box failure is still so common.)
Scaling is tough. Being a small scrappy company is a lot easier when your customer count matches your employee headcount. Hitting those next couple performance levels though when you scale from hundreds to thousands, then tens of thousands, then hundreds of thousands… those are effectively completely different company structures.
I've never run a business, but I'm surprised how consistent businesses are in providing absolutely miserable customer support. The customer support team is the face of your business to the people who are directly giving you money. If someone is contacting customer support, then they are already unhappy, and if they are walking away from their customer support experience even more unhappy, then they are going to absolutely hate your business. Employees in customer support should be top-notch and have the power to make things right by the customer at any cost. If your customer support is giving out big piles of money in replacement parts, that's not the support team's fault, that's a fault somewhere else in your company that needs to be fixed.
The reason customer support always sucks is that every company sees it as a place to minimize costs. Outsourcing to the lowest bidder is never going to have good results.
Precisely. And then most organisations seem to push the support guys away, moving them to separate departments and whatnot. It's the obvious step for everyone in the company -- afterall, support often brings lots of people bad news about their: flawed design, bad UI, bugs in their programming logic, additional feature-requests to squeeze in.
Consequently developers really like to hole-themselves in, as it's comfortable to spend all day, every day just solving those problems that you imagine in your own mind, instead of actually facing any real problems coming from actual user input....
Thank you for your reasoning.
I've heard from industry people that almost nobody factors in customer service to purchasing decisions. Providing it isn't cheap, so you're basically just handicapping yourself in the market.
For mass-market devices, the margins are so thin that every part of the product has already been cost-minimized, not just customer support. Consumers only care about the initial purchase price, and nothing more.
Aren't many laptops only profitable because they take money from pre-installed antivirus, VPN, and other junk software?
However, Framework should be an exception as they are in their own niche.
> sees it as a place to minimize costs
I think this is the part I don't get. The support team isn't what created the cost, the team that created the problem is. If you want to reduce support cost, you fix the problems that make people contact support, so people don't need to contact support. How big does X need to be for a CEO to approve the statement "You can save $X if you decide to make everyone who has already decided to give you money and has a bad experience absolutely hate your company"?
https://en.wikipedia.org/wiki/Shooting_the_messenger is usually a sports that all companies are good at. Sadly.
That's the thing people are not understanding when they poopoo on Apple's products. Unlike any other laptop brand, being able walk into a store, get a laptop and start using it right after getting it while also taking it back if I have any questions or problems is just a wonderful user experience.
I get that Apple's stuff is soldered on or cannot be modified. But honestly, is that really a deal breaker? This stuff has gotten so good that I can't remember the last time anyone opened their computer up to fix or upgrade things. These things have a 8+ year life span and get OS updates for nearly that long too.
I don't know, I guess I just want to get a computer that just works, have it be automatically added to my Apple Care family plan for any damage, and then just get to doing what I need this tool for.
I see the appeal, Apple makes nice hardware. There is a subset of computer users whom require that they own their computer, without carve outs or caveats. For those, Apple is a hard sell.
> is that really a deal breaker?
Yes, to me it is.
> These things have a 8+ year life span and get OS updates for nearly that long too.
And I have desktops with components from 15+ years ago that I could upgrade throughout the years, not at the mercy of a single vendor, without creating a ton of e-waste...
> I want a computer that just works
This is a false dichotomy. We absolutely can have modular and repairable computers that "just works", and we absolutely can have a company that builds them and is better equipped to handle exception customer support.
The real lesson here is that a company can decide to pay for the cost of providing great support.
Google famously did the math and found that providing human customer support for their product would cost billions and chose instead to fully automate support.
Apple did the same math, and hired tens of thousands of Apple Store employees worldwide, almost doubling the size of the company. Of course, in the end this is a margin/profit trade-off, but be aware that different companies make different choices.
Dell and HP etc are better than Apple for business. They will send the support technician to your office the next day (or The save day if you pay extra) and they will fix it.
Apple require sending the laptop away somewhere, and waiting days for it to come back.
That’s why I don’t bother with going through support channels if I’m within the refund period. Either send me a new one after the first email or give me a refund. Or if I really want _that_ thing I will skip support and buy an identical new unit while I initiate the return, to get the replacement ASAP. If the manufacturer gets cute or refuses a refund the it goes straight to a chargeback on my credit card, no back and forth.
Reading the article, and the comments in here, is a little sad because it suggests that the thing we all want (I think)-- open, tinkerable hardware that is profession-ready and sold by a sustainable business-- is not actually possible.
The hardware problems discussed are roughly what I'd assume were the pitfalls of a thing like the framework, and the support stories roughly what I'd expect from the cut-rate support that surely is inevitable with a smaller vendor in a competitive space. I had not heard of any problems with framework until this thread but the problems don't surprise me.
I hope that's not true-- that framework's issues are not inevitable but the result of fixable business decisions.
It's not really the hardware that's a problem though. I'm a serial upgrader, and we have 2 frameworks at home. Yes, I think in general the hardware quality doesn't match apple or xiaomi. But that isn't the problem - the issue is that in a modular, repairable laptop, you shouldn't have to deal with customer service for months to get a fix or a replacement part.
Consider that Framework's competitors-- Apple, Dell, Xiaomi-- have O(N) models to support and Framework is more like O(N!).
Then consider that Framework additionally has to spend on R&D for connectors, firmware, patches, errata to make their modularity work; and that they're doing all of this with far less revenue than their competitors.
Its expected that with those constraints that something would have to give, and that customer service would be the first thing to go-- particularly when your customers will tend to be DIY types that self-solve many/most problems.
Everyone else lets you pick different CPUs and RAM amounts and some other aspects too. If you treat the I/O modules as external then Framework has a pretty typical amount of models to support. And that's reasonable to do given how isolated those modules are.
I think this is right. At least for now, choosing Framework is a bit like choosing Linux. It's can be a great choice for the person who understands the pros and cons of the choice they are making, and a bad choice for the person who does not.
> tinkerable hardware
How about using desktop PC?
I don't get the fascination so many people have with laptops. Tiny displays that are also way below the eye level. Subpar keyboards. Pointing device limitations.
They are portable yes, but how many laptop users actually spend their life in business trips to make laptop a real first choice for their production tool?
> How about using desktop PC?
Desktop PCs that are tinkerable are massive, and the ones that are tiny are generally not tinkerable (they tend to use custom laptop hardware). And desktop PCs get to benefit from the early days' industry cooperation to create interop standards.
Laptops, due to their priorities (size, thermals, battery), motivate integration, which disincentivizes interop standards. Framework is swimming against the stream here and it looks like they're having to develop custom firmware and connectors to make it all work. The difficulties in the article are entirely unsurprising, given that.
> how many laptop users actually spend their life in business trips to make laptop a real first choice for their production tool?
Downsizing to a powerful-enough laptop has a lot of IRL benefits. Not everyone wants (or can accomodate) a full ATX jet engine. Macbook Airs are not popular because an entire subset of geeks forgot how to build a PC or stopped doing geek things.
> Desktop PCs that are tinkerable are massive
They are a bigger than laptops, but they can be quite small.
> jet engine.
Don't put jet turbines in your PC and you won't have jet engine.
> Not everyone
I understand that not everyone is professional computer user. Some people are satisfied with a tablet or even just their phone. Some maybe want to browse the web for an hour a day at home maybe, sure, go get that macbook air. But if you spend multiple hours per day (maybe 8+), why you settle for less? 5-in-1 fork-knife-flashlight-toothbrush-drill is convenient in case of emergency but is not great as daily tool.
I code, use docker, use VMs, play with LLMs. An M-series apple with 32GB does everything I would need from any desktop I'd be willing to pay for, comes with me so I can continue work on a train, lets me monitor email at work....
And if I need a bigger screen, sidecar and airplay work wonderfully. A wireless trackball plunks wherever my laptop is and I have everything I need, any time.
The desktop necessitates a permanent station with keyboard, power, and monitor. This necessitates a desk, which carves out a piece of my living space for an activity that is sporadic. It creates a need to synchronize not just code but workspace state across N devices, and synchronization carries inherent cost.
In a very many ways, laptops are more efficient with life, time, space, cognitive burden, and the sacrifices don't actually matter that much because they are trivial to mitigate.
I don't suppose you aware that laptops get connected to external monitors, and today laptops can handle monitors of any size?
As a developer when someone complains of a problem and you need to sit sided by side to see the issue can you carry your desktop to their office to view and debug the problem?
BTW in what alternate universe desktops are error free?
> As a developer when someone complains of a problem and you need to sit sided by side to see the issue can you carry your desktop to their office
If you're a travelling developer whose job is to drive to different locations to fix peoples issues I understand - and I mentioned that group in my first comment.
> BTW in what alternate universe desktops are error free?
They are free from being stuck with any company. Just use different parts.
I am beyond incensed that my framework is dead in the water because they screwed up the CMOS/RTC battery so when it dies literally the _entire computer dies_; i.e. nothing boots even on AC power.
so now I have to take the whole thing apart, and do a tricky operation to replace it because they screwd it up, and refuse to fix it themselves.
The experience you get from technical support is a good insight into the culture of a company. Too often teams are siloed and don’t speak to each other, and the support team is often deprioritized over the development team.
I am working to replace a vendor right now whose service predictably gets worse at night (I even wrote a script to automate detection of the issue), and they have been unable or unwilling to fix this for over a year. Unfortunately public shaming is often the only way to get a good response from companies.
We’ve been buying Framework at our company for a few years now alongside equivalent spec Dells.
The frameworks have always had weaker batteries and noisier fans but in every other way they matched or exceeded the Dell quality and reliability.
We have been through several mainboard upgrades, saving close to €1000+ on a new laptop each time.
The framework helpdesk could be better, but so can Dell and the rest. One thing I learnt early on is to get access to the framework business support team, which skips you past the first few rounds of dumb questions.
Most of our framework users are pretty happy and that’s what ultimately marks them as a success in my book
The main reason why I always bought (sometimes mediocre) Lenovo, Dell or HP devices was their on-site support. Also not very pleasant to deal with them, but if there is an issue they usually come within 2 or 3 days and just fix it.
If there are any weird things happening, they usually replace the mainboard, which gives you basically a new machine while keeping all the data. This is especially helpful if a device still works somewhat, because it doesn't lead to longer downtimes. Tech arrives, stop working, 1-2h later it's fixed, continue working.
I've been using a Framework 13 AMD for three years. I use Linux full time, so seemed like a sensible choice.
It's been...fine. The hardware itself has held up and feels plenty fast, but I get duplicate key presses on the keyboard sporadically, and the standby battery life is absolutely terrible. Like 5x worse than my 10 year old ThinkPad that uses bios-level s3 sleep.
It's so bad that even if I charged the laptop last night, I won't go to a coffee shop in the morning without a charger. I've debugged it as far as possible. I think this is the expected power drain.
Echoing similar sentiments in here - I want to be able to wholeheartedly recommend it, but can't yet - and I haven't had to deal with support.
Maybe the new pro models are better? I suspect none will be better with standby battery life with s0 sleep.
Yeah, suspend to idle (S0ix) wakes up the quickest, but uses the most power. It tends to completely drain the battery on my Thinkpad X1 Carbon within 36 hours. When I got my Framework 13, I made sure it used hybrid sleep. Hybrid sleep suspends to idle, then wakes up every hour to check the battery state. If the battery gets down to 5% or it's been more than 2 hours since the laptop was initially suspended, it saves RAM state to disk and powers off completely. So you get quick resume if you use the laptop with in an hour or two, but you also avoid draining the battery if you leave it sitting around for days. This behavior is pretty similar to how Macs work.
The Arch wiki has some useful info about how to get this behavior.[1] It's enabled by default on Omarchy.[2]
1. https://wiki.archlinux.org/title/Power_management/Suspend_an...
2. https://omarchy.org/manual/system-sleep/
Thinkpads are so much better. Nice repairable hardware, and great Linux support. (I own both Thinkpads and Framework hardware. it's not hard to tell)
I've got an early F13P (AMD). I'm happy with it overall, but if I put it on standby overnight it loses ~20% charge. Before I put Linux on it, I configured the BIOS to never charge past 80%, and I don't think I've gotten it below 20% more than once or twice, so it's been treated pretty well (it's also less than a year old...).
I've had a similar experience, though within the first two weeks they agreed to do an exchange. Within 3 months, the main board on the new machine shorted out, they replaced it again, same thing within the following 6 months. They replaced the machine again, it went 16 months before shorting again, but also required 3 keyboard replacements during that period.
Regretfully I had to switch back to a mac because our IT manager couldn't justify all the time and energy required to maintain the machine.
Christ. How hard can it be... If it's broken on arrival, you take it back immediately, no questions asked. And preferably, you send a replacement before you've even received an ack on that, especially if it's a repeat customer.
Sounds like no one ever thought to ask "how much patience does our customers have?" and "how much patience does this particular customer have left?"
I have zero tolerance for dealings like this, and once you're on my blacklist no amount of press releases about improved processes and a hired CxO who be sure to take care of it going forward will get you off of it.
That said, I still respect Framework for what they're trying to do, and from what I hear, the hardware is great when it works. I hope they can get their act together on the business side too.
Back in the 90s I did technical support for Winbook laptops (owned by Micro Electronics, Inc at the time if there are any MicroCenter fans in here).
We had this abusively absurd policy that if a brand new laptop was shipped DoA, the *customer* had to pay to ship it back and had to wait until the new laptop was repaired and shipped back to them. In 18 months there I never saw us pay for return shipping and I never saw us cross-ship a laptop. Keep in mind some of these configurations were closing in on $5k in 1995 dollars.
This was not a particularly uncommon issue either, unfortunately. The dread I would feel when a customer would open with 'So I just received my laptop'. xD
I've been really happy as a long-term owner of Framework hardware, for what that's worth. I've been using a Framework 13 as my main computer since once of the earliest batches in 2021. I've gone through a few iterations of their motherboard and upgraded various other components too.
Also for what it's worth, I've had good experiences with their support team, to the limited extent I've interacted with them (I think I returned a display at some point). I don't mean that to discount the author's own experience, just sharing my own.
I have a Framwork 13 (with the 11th gen Intel). I don't hate it, but I wouldn't recommend it either.
Battery life is abysmal. That is even after the battery upgrade kit was installed.
Recently I swapped the bezel, which was easy, and hey, you can do it. But I never had the wish to replace it with literally any other laptop I ever owned. But on the framework, the plastic bezels somehow disintegrated, and I basically had loose strings of it hanging around.
But that's any hardware with old Intel CPU. I don't see how Framework is at fault here.
Ehh. I've got several Frameworks, including the F13P. None of them have great battery life. FWIW, they're all AMD machines.
I'm perfectly happy with my AMD Framework 13 and would absolutely buy one again. I won't need to for a while though, as I've been able to upgrade mine as necessary over that last two years or so.
I have an AMD 13. I find the standby battery life to be absolutely terrible, even after confirming I'm hitting fully optimized power draw.
Have you had the same experience?
Depending on what you are going for you may want to add nohz_full,nosmt to your Linux grub kernel command line arguments and set noatime on ext4 filesystems in file /etc/fstab.
Turning off smt (and nohz_full; it’s not a network server) lets the cores clock down cleanly. Got that trick from the intel manual and learned about clock domains from a Verilog programmer. Has worked reliably on many Linux systems.
Even found that one of my i5 servers never had smt to begin with, which explained its more consistent performance.
Had been poking at this for at least 5 years prior with powertop(8) to no avail.
EDIT: nosmt also effectivle doubles ram cache size. For my work the extra hyperthrrad is useless, because there are rarely mixed processes where some to integers and the others do floats. Bottlenecked on ALU and cache, mostly matrix stuff.
Just want to put it out there that I don't feel this way, and I will be buying Framework again. I like it quite a bit.
I have had an issue with a failed bios update on an AMD 13. There's a page on their forum that shows its been an issue since July, for a specific upgrade. I bought 2 at the same time and now won't upgrade the bios on the second. It's still being offered.
I can confirm the support was always someone new, I also had to repeat myself.
I did get it all resolved and it took a month when they sent a replacement main board.
But I have lost faith in the company and will need to see in their newsletters over the coming months how they have improved before I could buy again.
It really ought to be possible to flash a complete bios image in cases like this. I don’t understand why latop companies (FrameWork is not alone here) make it so difficult.
I recently had to fix a failed bios update on a Thankpad X1 (which had stopped booting altogether) which necessitated acquiring a bios image from an online forum & flashing that from a Raspberry PI over the SPI bus. Lenovo’s answer to this problem was: buy a new mainboard.
Is there some logic involving Secure Boot that prevents laptop manufacturers from offering a way to flash an intact image after a failed bios update?
For many modern desktop motherboards, there is a BIOS recovery that allows you to load a BIOS image onto a USB drive. You then plug the USB drive into a special USB A slot (it will be labelled on the IO shield). On boot, the BIOS will immediately try to overwrite itself with the BIOS image from the USB drive. Unfortunately, I think this feature is more rare on laptops.
This is a YouTube video from Asus about how their BIOS recovery works from the user perspective: https://www.youtube.com/watch?v=xb6FbJwVg8Y
I have a maxxed Framework 13 and the thing just reboots randomly sometimes. I have tried everything but if course I cannot try a different OS and wait for the event to happen as supports wants me to.
This is in addition to a month-long saga of lagging graphics because of kernel issues that was eventually fixed.
The battery lasts 2 hours.
Anyways, learnt my lesson.
On a peak of Linux/Framework hype, I jotted some arguments why, while I see Framework as a good company, I think their computers are a bad deal – https://www.brachkow.com/notes/wrong-linux-framework-hype/#b....
In short: they are a worse computer per buck than Apple ones, and repairability and upgradeability is more of a gimmick that will be possible/make sense only on very specific occasions.
As long as Asahi is WIP, any Macbook comes with a heavy penalty known as macOS and Apple not giving a fuck about power users.
I've been stuck with one at work because it's still much better than Windows, but my god it's painful... Homebrew/macports are so much worse than good Linux package managers (I use portage or apk at home), the whole system is sluggish compared to a good ol' X11 WM only setup, the base UNIX system is full of bugs related to their lack of actual POSIX compatibility and old coreutils/bash fucking up.
Almost updated from 15 to 27 this afternoon due to a very sneaky dark pattern in the updater pane, ha (EDIT: this one https://forums.macrumors.com/threads/15-7-3-be-very-careful-...)
In 2024 I was looking for a laptop to replace my T2 Macbook, and being a pretty geeky dude I was leaning towards Framework. I ultimately ended up getting my Thinkpad P16s just because it was a fair bit cheaper for better hardware, and I absolutely love it.
Looking at this I'm kind of glad that that's the direction I went.
Just to add my experience to the pile here...
My refurbished 13 came with a USB-C power cable with the plastic shielding cracking and breaking off practically out of the box (noticed it within the first week). I engaged their support via email and they responded fairly quickly and after sending photos and serial numbers, they did send me a replacement without any undue hassle. Obviously a power cable is less expensive for them to just send on as a replacement, but I was happy with the outcome.
You could just as easily look at the situation as "why were you shipped a defective cable from the jump" and I do agree, it is odd that they sent it like that, but they did make it right.
Sorry for those who have endured a torturous experience, and hopefully Framework improve their processes.
Between these stories and frameworks being seriously overpriced for what they are (even before the ram & ssd shortage), I'll probably never buy one.
3000 EUR is an insane amount of money to me for a laptop. You can get a used Thinkpad for a few hundred bucks that is good enough for development. Maybe you need a ton of ram for vms or a good CPU for compiling, but 1-1.5k should be plenty
Why would you compare something new and something used? It baffles me how common these kinds of posts are, for example, in anything Raspberry Pi related. I have Framework 13 with 32G of RAM and it cost 1200 € (new!).
If it baffles you how common these kinds of posts are, perhaps a re-evaluation is in order.
Private individuals buy used hardware all the time that works more than adequately for their needs. The reasons behind this are too great to enumerate, but a shift towards predominantly Web-based workflows has something to do with it. Nobody needs massively beefy hardware if they are just going to prompt and Figma. And working with specific tools that are OS-locked (SolidWorks, Fusion, etc) tend to be the exception rather than the norm nowadays.
On the company front, there are reasons why companies would obviously want to buy new hardware, such as warranties and other headache-free situations, but even so depending on the size of the company a "hand me down" policy might be in place where previous generation hardware is rotated among staff before it's retired. So even still, used hardware is in active rotation long after it's warranty period etc.
If you end up with constant issues when buying new, as is the case in this article, then it will prompt all the people who typically buy used/reliable to chime and simply say "you should have bought used and reliable", even if it is not entirely applicable it is valid to consider.
I got a semi-old Lenovo 15.6" laptop with a 3K IPS (colorimeter built into the case), and 32GB of RAM for about $80 USD. It is obviously not perfect, but for $80 it's a joke of a useful machine for many development tasks. It obviously costed a lot more than this brand new, and yet... it has the exact same performance as if it was brand new (obv. RAM is slower than actual 2026 tech). There are replacement parts galore for it and it is easy to take apart down to every last bolt and reassemble, and Lenovo shows how to do this. This is a company that understands its "secondhand market" userbase.
I'm in the same boat tbh. I was an early adopter of the framework 13. I was happy when I was able to upgrade to a new motherboard and CPU, but that's about where it ends.
Ootb the internal microphones never worked and my fingerprint reader was intermittent at best. It didn't get in the way of work so I never really bothered to try and troubleshoot it.
Fast forward to more recent times and I've been using the laptop for a lot more work so I decided to try and fix the broken parts. It was many months of the same kind of back and forth with support, nobody really understanding the troubleshooting I've done already. The audio was a cabling problem that was easy enough to fix. One pcb and one cable to possibly replace.
The fingerprint reader was something else entirely.
I replaced the entire fingerprint reader, the entire cabling and I still had an issue. At this point they told me I needed a whole new input cover?? Turns out the touchpad routes the signals for the fingerprint reader and I actually needed to replace that.
I specifically asked about replacing that when I first opened the ticket and they assured me that would not fix the problem. I could have bought all the parts I possibly needed after a single email, and in hindsight I should have and then just returned all of the unused parts. Instead I spent hours taking photos and dissembling and reassembling the thing.
And after all of that I still can't use my laptop under heavy load because the NVME drive will simply crash and stop returning any data. No SMART errors, latest firmware and drivers everywhere. Multiple drives all with the same exact symptoms.
I will not be upgrading the FW 13 pro after this experience.
I'm fairly happy with my FW13 but I wish they would put a better webcam in this thing, and make a much greater variety of plug in modules e.g. IMU/GPS, 5G, airtag, dual USB-C, etc.
I wonder if Framework should just not offer tech support. You either RMA it or repair it ypurself
I have a Framework 16 for a couple years now. Last year I was having an issue with the monitor somehow randomly going off and causing a freeze of everything on it. No freeze on the external monitor and I can continue using the system if the mouse pointer was there before the freeze occurred. I started the whole support thing too, but bailed when they asked for verification as the laptop had been purchased with the help of a former employer, and they no longer had related emails or stuff from the packaging. A few months ago I threw Claude at the problem and it took a few diagnosing sessions, but the workarounds it eventually applied have been holding, luckily, so all's been well for a while. No need to touch support nightmare for things that AI can handle.
I don't understand why people feel offended if this article is written by hand / claude / gpt / someone with IELTS 8 band.
He had an experience he shared. You can consider it and be cautious your purchase or risk and enjoy the support shenanigans.
He paid for a laptop. He can write his support ticket with claude. It's none of the concern for anyone. But framework is contractually bound to fix hardware. ( And ethically too else why even sell stuff in the name of repairable when you yourself can't handle repair )
Hardware faults are out of framework's control. I would assume they get insurance, warranties and also bake in some markup to serve support and replacement.
Poor customer support is a choice they consciously make.
Not that it excuses Framework, but I had a similar experience regarding a Dell XPS laptop a few years ago. I think many companies tell their people: "Do not replace equipment unless you absolutely have to!" It's a probably a useful general heuristic for them, but it can run amok when the people implementing it don't have the power or wherewithal to override when it is sensible to. Dell spent more than the cost of replacement on techs and parts but never solved my issue (system overheated and crashed under load - I just limited the CPU to 88% for the rest of the time I had it).
I purchased a Framework 13 DIY edition in Oct 2024, my machine would not boot. While this behavior is not acceptable on a freshly shipped product, Framework support was helpful in debugging and I was able to return it back by Nov 2024. The return process was easy.
I then waited a bit longer for the AI 300 to ship and purchased that in April 2025. This machine has been my Linux server where I run my docker containers and claude sessions [I use it more like a server type machine], and my photo library and occasionally use it like a laptop. I'm happy with the keyboard (not such much the trackpad). My daily laptop is a macbook m3 pro.
The initial Fedora 43 experience was a bit rough, but for the last 6 months or so, the framework 13 has been a really good workhorse machine running Fedora 44. I'm considering upgrading my disk to 1T (512G installed currently) and possibly swap to a framework 13 pro after a few months.
There are some risks to new vendor but the alternative is that big tech companies will force you and nudge you down a path where your choices are limited over time. Framework is a welcome alternative, and if you have extra $$, it is good for enthusiasts to vote and encourage competition in the marketplace. While the Macbook M3 is close to a perfect machine, every software release being shipping by Apple causes more deep integration with the rest of the ecosystem forcing you to keep all things Apple and this is not good for the consumer in the long term.
Also, with volume, if you are a school or a software company - Framework gives you some benefits on maintenance, moving memory/disk from one system to another, if one mainboard fails, you can replace it. Framework puts in a lot of effort into upgradeability [eg: from 13 -> 13 pro], I'm not sure how much of that is worth the effort - as I'm guessing as a vendor, you will make some design tradeoff choices on backward compatibility vs being the best of breed for the future. In some of these cases, facilitating a marketplace, where folks can trade in seems more appropriate. Testing the different combinations of choices I'm thinking is also a nightmare - as certain combinations may not work well, making customers unhappy, dealing with returns and aggravation with debugging seems like a problem that framework should not be solving.
I also really enjoy the youtube videos that Framework produces -- really educative, talking about design tradeoffs and discussing competitor products as well. I'll really hoping for Framework to be successful as a company.
I never got the appeal of these in the first place. Sure, replacing/reusing parts is a nice idea. But it's essentially nullified by their weird pricing. Ecological? Sure. Economical? Absolutely not. Everyone that owns a Framework that I know turns out to be a massive LLM fanboy, and honestly I think without that (biased) marketing no one would really give a damn about them. Other than on YouTube all I hear is bad things about them, e.g. getting bricked by _recommended_ BIOS updates and other weird hardware quirks.
I feel like Framework is in a difficult situation.
They seem more bootstrapped rather than funded with tons of outside investment, which makes for a better long-term company outlook.
But this means that the volumes they deal cannot grow quickly, which hurts the value (volume discounts at suppliers) and support experience (which is limited by the rate the support team can grow).
It's hard to tell someone who needs a computer to "go get the new FW 13 Pro, it looks so nice and it's repairable" when the laptop is still backlogged and important replacement parts (like keyboards) are still unavailable?
I love my Framework 13 12th gen, but due solely to the company's circumstances their offerings are solidly enthusiast-only, not a layperson's only machine.
For businesses, it's probably viable if you order batches of laptops together with spare parts to maintain uptime before (or ideally without) the email chain song and dance with support.
Do I recommend them? Heck yeah, but only if you don't need it now and have an older laptop that's still working. The non-pro 13 is also a solid option still with better parts availability.
I've had a similar run-in with Framework's support team, and am currently weighing up whether I want to go through that again for a second issue with my Framework 16. I'm leaning in the direction of no, but I have to disagree with the author and say that it's worth sticking with Framework, if only because I can buy a replacement part instead of a replacement laptop. Maybe your business can afford that but many of us cannot.
The thing with Framework's setup is that they are really in the exact situation where build quality would suffer the most: Unlike large companies, they don't have the product volume nor the capital for fully automated manufacturing + rigorous inspection/audit, and their hardware are way too custom so they can't use a lot of well tested off-the-shelf parts with the quality assurance amortized like a lot of white box manufacturers.
Big component manufacturers usually tend to not to want to work with somebody like Framework because it's a lot of work for relatively little profit because the lack of volume, which is why the vendor they work with tend to be smaller, cheaper suppliers with weaker engineering/quality assurance.
Framework are fun personal laptops to play around with, but for enterprise, it's probably better to stick with the large manufacturers, as bad as HP/Dell/Lenovo may be sometimes.
In case anyone thinks OP is exaggerating, this is the same frustration I had with support more than 3 years back. Somehow, this seems to be a continuing theme
I like the idea of framework but low volume products give you low volume problems.
Having gotten caught in similar loops in the past, I have a simple rule for new hardware.
If it doesn't work well enough to keep on the first day, it gets returned.
I've bought a few Framework 13's and a F13P. I generally like them, they're expensive, but are very reparable. F13P is a big step up from the original F13.
They're a good value proposition if you think you'll ever damage your laptop enough to warrant a replacement. I was moving boxes once and dropped in on my F13, destroying the display and the lid. I spent maybe $250 and about and hour or two of time, and it was just like new.
I haven't had any of the QC issues people have been talking about.
One big draw for me I haven't seen on other laptops is the 3:2 display ratio.
One thing I wish they'd change is the keyboard. With such easily replaceable hardware, I should be able to get different styles of keycaps and switches.
Another thing is battery life. The F13P is much better than the 13, but it's still not great. Not sure if it's a firmware issue, a battery issue, or both.
My first reaction to this is wanting to defend Framework by sharing my own experience. It's interesting: my desire for Framework (and its repairability mission) to succeed leads to a bit of tribalism, as I think is evident from the other comments. Framework has a lot of great things going, but that shouldn't excuse it criticism on its customer service, which is clearly an issue.
I use a Framework 12 as a daily driver and it's by far my favorite device I've ever owned, with very few issues. However, the one physical issue led to so much back and forth with support that I just stopped responding. Both things can be true! I'm still rooting for them, and would buy from them again, but they do need to improve.
Framework's hardware is great, I love my Framework 13 Pro. But I've never heard a single good thing about their support. Every single story I ever heard was about endless cycles, asking for pointless photographs, and failing to fix the issue.
If anything ever breaks, I'll just pay for the replacement part and fix it myself. Which is probably what they want.
To offer an alternative perspective to the large amounts of criticism here. I have been enjoying my Framework Pro immensely. Granted I was laser targeted as a Linux user who had a Macbook Pro because of the build quality/battery.
Hearing some of these stories has made me a bit scared if I ever have to deal with Framework support. I understand they are a much different company than Dell or Apple, so they face different constraints, but I'd hate for them to disappear because too many people are burned or are afraid of being burned by them.
It really seems like they're dedicated to learning from feedback, so I really hope their support team can improve their process and break through their reputation.
I got the original F 13 ... great for learning, experimenting, fixing (and more learning by doing so). But not really a "build once and forget about it" type laptop. Customizations can some time and if you just want it because it's "open" but you're not tech savvy, you're screwed.
yea, this and a lot of the comments here are obviously bad. I just got my Framework 13 Pro last week and love it but QA, customer support, and the ability to upgrade over time are all obviously big selling points for the company. I hope they improve though, I haven't had this much fun with a computer in a long time.
It's funny because having owned a few annoyingly defective laptops from multiple brands, this is how I expect support to go with anyone but Apple, but actually, I would've expected better support from Framework too.
Just get Lenovos people. Solid quality. T, X or P series and if you're installing Linux on it, make sure you get something that was released at least a year ago.
Sure, it's made in China, but seems like there are worse places on this planet.
And here I thought that this was going to be about how, after almost three years, the Framework 16 still has severe firmware bugs that cause the CPU to be stuck at 550MHz[0], it doesn’t work with various USB devices[1], the audio expansion card is broken[2], and USB-PD is broken[3]. And then every new firmware update seems to come with some regression[4][5]. And the community submits patches and they are just ignored[6]. I don’t get it.
[0] https://github.com/FrameworkComputer/SoftwareFirmwareIssueTr...
[1] https://github.com/FrameworkComputer/SoftwareFirmwareIssueTr...
[2] https://github.com/FrameworkComputer/SoftwareFirmwareIssueTr...
[3] https://github.com/FrameworkComputer/SoftwareFirmwareIssueTr...
[4] https://github.com/FrameworkComputer/SoftwareFirmwareIssueTr...
[5] https://github.com/FrameworkComputer/SoftwareFirmwareIssueTr...
[6] https://github.com/FrameworkComputer/EmbeddedController/pull...
> The laptop arrives early August. Q assembles it
That’s the first problem. Who thinks that assembling a laptop that was just bought is reasonable?
> powers it on and is greeted by a “missing input module” screen
That’s an immediate return, not a series of support emails. Doesn’t Framework have a no questions asked return policy?
The entire chain of interactions is justification for a chargeback.
So what you will, but a MacBook would have simply been replaced in the Apple store the same day.
I'm just struck by the idea of ordering a new laptop, finding a hardware fault in it, and then arranging to have them ship a part. Is this a weird Framework thing? Return the laptop!
Framework appears to have a 30 day return policy. What's the logic in trying to salvage a bad laptop?
You're either a small, lean company with a small and undertrained support team (The Framework community forum is the best way to find actual support). Or a large, bureaucratic nightmare hoping to send you away before you ever talk to a human.
The Apple stores break this mold, though you have to find and drive to one. And I had an M2 Macbook that needed repairs twice in a row for the same issue. Thankfully the first repair was just barely still under AppleCare, while the the second was covered by work. Because I'd otherwise be fuming for how expensive the repairs were, and that they didn't fix the original issue. No longer using that machine, but I wouldn't be surprised if it'd have broken a third time by now lol.
Yeah, I semi-recently ran into this with a new purchase of the Dell XPS. It came to me with the keyboard broken out of the box, something I knew was a risk given some of the reviews.
Dell created one of the worst paths possible for getting any sort of remediation for this process, force AI interactions, no direct contact with support, and they wanted me to somehow take a screenshot of the fact that the keyboard was malfunctioning.
I would have kept the xps if there was a path to get the keyboard fixed/replaced, but Dell put up so many barriers that the fastest way for me to fix the problem was to return the laptop and get my money back.
I should have been able to drop the laptop off at a local repair shop and had them replace the keyboard, dell made that impossible. Heck I would have happily done the repair myself if the keyboard was available for purchase.
Wow.
Stinks because I need to replace an aging MacBook and was leaning Framework.
Is Omarchy on a MacBook the way to go for mobile Linux these days or?
As someone who recently tried installing Linux as the primary OS on an old Macbook... wouldn't recommend it. With all the proprietary parts in Apple products, it's a wing and a prayer situation in hoping the distro has all the drivers figured out. On my 2017 MBP, the drivers for opening/closing the lid and activating/deactivating sleep mode, bluetooth and wifi all had not been fully figured out. Made for a lousy experience and this was the Ubuntu distro for that laptop specifically.
It's also worth saying this, but anytime someone posts a review, or in this case a whole AI written blog, about something, there's a good chance that person is an outlier unless there is significantly more examples. Folks are a lot more prone to complain online than they are to compliment. That this user was so lazy they AI-wrote this blog post also doesn't help their credibility.
For Omarchy in particular it depends on the MacBook, as the compatibility varies between both generations of M and base/max.
That said, I have been using it as my daily on my desktop for about a year and threw it on an old 2016 MBP to see what the experience was like, and I will definitely be putting it on my M5 MBP when it becomes stable.
FWIW I've been using a Framework AMD 13 for a bit over three years now without any issues.
If you haven't had any issues with your laptop, then you presumably didn't interact with customer support? Or did you not have issues with customer support specifically?
Perhaps OP was unlucky, but outside of this - I don't understand why there are so many companies with good products but terrible customer service. Shouldn't customer service be considered a part of the product?
Yeah no contact with their support so I don't have any commentary there. I do agree that good CS is critical to a small company's product like this. I imagine it's hard to scale that up. I hope they get that figured.
Never feels good being left helpless due to (lack of) customer support.
anything you would highlight about it (good or bad)? how is the battery life?
I have a FW 16 (first gen with the AMD 7040). It's still going strong after 3 years of daily use, mostly docked but stand-alone maybe one or two days a week.
I don't use it on battery much but currently it'll last maybe 4-6 hours? (Assuming typical web browsing / videos / coding.) So definitely worse than macbooks, maybe an hour or so less than my brother's (new) intel ultra laptop.
Build quality has been pretty solid. Only things that have broken have been my fault (keyboard stopped working after the Nth spill, usb connector (for power) is a bit loose after years of sloppy aim) and have been a breeze to replace.
Perf-wise, my only complaint is that I wasn't expecting usb bandwidth to be a bottleneck. Turns out I can't drive 3x 4k screens and fast-charge and have full ethernet bandwidth all at once (each to a different usb port, no dock). But I guess that might've been a unrealistic expectation.
I guess I should note that I've had a minor issue with the amd igpu crashing in a certain game under very specific conditions and the laptop occasionally failing to sleep / wake from sleep. But iirc the former is amd's fault and the latter is unfortunately par for the course on linux ime.
But yeah overall a positive experience. The laptop was definitely pricey for the specs but I knew that I'd be paying for the modularity + small-volume going in. It's also nice for peace of mind, not having to handle it as carefully, knowing its fix-able and trusting FW not to cheap out hinges and the like (previous 4 laptops have all died from hardware after 2-3yrs).
Battery life is fine, but I wouldn't call it good. It's my biggest gripe by far. Sleep with Linux burns 1% per hour. Actual usage battery life isn't awful, but I would need a charge mid day for a full day of usage.
My work MacBook crushes it in battery. That thing is so efficient. I have seen the new Intel Frameworks are looking good on battery, but I don't have hands on experience there.
If I didn't care for the repairability and modularity, I'd go MacBook for sure, which are generally long lasting machines as well in my experience.
thank you!
Maybe I'm just exceptionally lucky, but I've used Debian on several "mainstream" laptop brands (HP, Dell, Lenovo, etc.), including newest models, and the worst issue I've run into is that firmware updates require more fiddling than on Windows, so it's ten minutes of work instead of one. Besides that, everything has always worked as expected.
Omarchy is one of these stupid vanity distros - just use the base distro, Arch.
I got Framework 13 Pro earlier this year and absolutely love it...
Have run old thinkpads for ~20 years but anyone telling you they run Ubuntu on Thinkpad and have never had to mess about with firmware issues, had battery/standby problems, or had to open it up for repairs is talking shit
Thanks for the feedback y’all. Expanded my options a bit!
Why would you consider Omarchy over all the other, much better, less problematic Linux distros?
Omarchy is problematic? Or do you mean DHH, Lutke, et. al's opinions on social issues?
Its a linux distro. You can use a tool - especially an open source, free one - without supporting the founders.
If you have a problem with free as in speech, Linux and FOSS isn't for you.
Without even talking about any of that, isn't it hastily vibe-ducktaped together?
It's a vibecoded linux distro
1. Obtain ARM MacBook with as much memory and storage as you can afford.
2. Install https://cua.ai/docs/lume
3. Create MacOS and Linux VMs ad libitum.
4. Profit!
I was looking to replace my Lenovo with a Framework. Guess that's out now. What a shame, as I prefer to support Linux-friendly vendors.
Basing your purchasing decisions on a single bad experience anecdote just means that there won't be a single vendor that will satisfy you.
I've been using a Framework for a few years. I'm still happy with it and would get one again if I needed one. However I've never had to contact support, so I can't say anything positive or negative about that experience.
Choose System76 computers instead of Framework. Framework comes with nice promise but lack of commitment to make it true and globally available. Very US centric company that in the first pre-sales contact smelled fishy and it seems I luckily dropped of considering them at right stage!
Stay with Lenovo. Trust me. I own Framework hardware and Thinkpads.
I like my Framework Pro 13 much more than my Thinkpad X1 Carbon.
Lenovo is Linux-friendly though. A lot of their laptops are Ubuntu certified.
No. Linux on Mac doesn't support sleep. Your battery will not be happy.
Fine on a desktop that's always plugged in, tho.
No. I've recently installed Omarchy as a dual boot on an M3 Air and ran it as the primary OS for a week. It mostly works, which by itself is amazing. Bluetooth, camera, trackpad, going to sleep / waking up without issues, battery life is okay. On Apple hardware! There were few glitches but overall it is pretty solid. I could live with it. But. I hate to say it, but Linux is still ugly as hell. With all the eye candy Omarchy adds, with the themes, and beautiful animated backgrounds etc., it still looks and feels awkward and imho it's just not worth it. I am so glad getting back to macOS.
I have a Framework 13 pro and really dig it. Running Fedora 45, not Omarchy tho.
What in hell would make you think that Omarchy is the way to go for anything?
> At this point, Q is no longer a developer but has become a profesionnal photographer.
Wow. That’s a great line.
I was a fan of Framework, even as an Apple Guy. I always enjoyed seeing news about them. This is disappointing.
What is so great about Framework anyway? These days Linux runs out-of-the-box on just about any business laptop. AI can quickly verify compatibility or even write/patch whatever doesn't work.
If you want a good alternative to framework check out Tuxedo
Very high quality and extremely good support!
$3000. Congrats on falling for memes while Thinkpad and rMBP parts are plentiful.
I'm feeling the same about them. I like their mission and I want the mission to succeed, but damn the company is scummy.
So long story short: I got my framework 13 (12th gen) back in August 2022, in Austria. For those who didn't experience that intel generation, a very common bug is the 400mhz locking even when cpu is cold. In 2024 I had them replace the motherboard due to the bug. Than in 2025 it returned. Since I bought the laptop in austria I was entitled to a repair (austrian warranty law guarantees 2 years again after any replacement/repair). They refused and I had to threaten them with filling a notice at the consumer protection agency for them to react after a lot of time. They shipped me a new amd motherboard, and that functioned for about 2 months before it shorted I believe. After that I had to again spend about a month and a half with support until I forced them to return my money.
I also have a post on reddit about it with more details: https://www.reddit.com/r/framework/comments/1rx76l6/psa_for_...
FWIW I've used Framework 13 multiple generations and cannot be more happy. It delivers on the modular promise.
On one occasion I had to contact support, they were very helpful and I don't mind doing a bit of diagnostic myself. Hopefully this is a one off.
I'm confused. If it was broken out of the box, why not just return it?
I got a Framework 13 in 2021. I was so excited to use it. I had to repair it multiple times, first when it was 2 years old, second time when it was 4 years old. I know the point of having a Framework is repairability and upgrades, but I never had to repair a laptop before, especially during the first 5 years.
I first had to use it as a professional dev device in late 2025, before that it was just a light personal laptop for me. It suuuuucked as a dev device for me. I got a Macbook Pro again.
Their customer support experience is slow and really infuriating, even for design faults they admitted and for things they offer free replacements.
I would probably buy a Framework again for being able to replace parts, but my experience with the support has been meh as well.
I had a known-broken[1] keyboard (Del Key on the Framework 13" AMD, from Batch 3, October 2023) and contacted support with it.
Apparently their support had some e-mail viewer breaking on ">" (dropping everything after, which is terrible when quoting with text mode E-Mail). That drove me crazy because they kept asking for the same thing over and over again. I reported it on the forum[2] but did not receive any response.
When I finally figured out their email bug, they asked me to switch OS and record the keyboard not working on video. I ended up buying the replacement keyboard because that seemed better for my sanity.
I did replace the CPU fan as well, and it worked well, even a bit smoother than with ThinkPads. I also replaced memory. I like their documentation for stuff like this.
Recently, the camera has become unreliable, quite likely the routing of wires through the hinge breaks the cables after I opened and closed the laptop a few times.
I still mostly like the hardware and the philosophy.
1. https://community.frame.work/t/solved-broken-delete-key-like... 2. https://community.frame.work/t/support-e-mail/75541
I was thinking about buying one as my next to replace Dells that have been super reliable for years now ... let me keep my Dells.
yep, same problems with Framework myself. Got the 11g had issues never resolved after dozens of photos and back and forth. Replaced for the 12g, had to wait years for security updates, for the battery to actually be supported, never got the announced Thunderbolt compatibility.
Framework sells "fixable" but abandoned junk.
If the author of this post is here,
Please, I will buy it off you, I am desperate for a Linux machine that is cool :)
I used to run Thinkwares but I want something a bit more stylish
I have a 13 laptop that is now 16 months old and has had multiple issues with the display. I am on my third screen with the exact same problem as the first 2, a line that runs from the top to the bottom right where the hinge is poorly attached and rubbing on the display. I sent pictures, I sent videos, I talked to different bots that were all too stupid to understand. Like this guy, the 1st time I dealt with support they claimed it was OS related; because my drivers were out of date... That is odd when the line is present at all times when the screen has power applied. I sent them videos of this, narrated them and put subtitles on it. After 21 emails, they sent me the first replacement screen. The 2nd time, it took 27 emails. The third time, after just 4 emails, I said fuck it and decided to run it as a desktop now. Their mediocre hardware just isn't good enough to have to deal with their shitty support.
Sounds like a typical tolerance stackup and/or frame rigidity issue expected of a low volume && modular product. When you're not Lenovo and you're not shipping 1m unit/year, nor you're Sony with decades of miniaturizing things too much, nor were you Apple with obsessive pursuit of frame rigidity and Foxconn as a partner-in-crime, but you did have bunch of modules that easily come out and go in... you get combinations of parts that passes unit tests but fail integration "tests".
The reality is that it is far easier to purchase a used dell latitude or Lenovo Thinkpad off of ebay or craigslist and just update the memory or storage. I recommend integrated intel or AMD graphics though.
I received a Framework Laptop 13 Pro last week. DIY edition, but it was more simple to put together than a desktop PC. On realising a corner of the trackpad haptics weren't working, I contacted support. I'd already performed some basic troubleshooting which they didn't ask me to repeat, and after a couple of rounds of sending some photos (including, like in the article, the packaging box) and videos, they think it's a hardware fault and have escalated the ticket for a replacement input cover.
Until now, each response took a day or less, and felt efficient without any repetition. The latest response does have that worrying boilerplate that they're "currently experiencing a high volume..." so I'm hoping it doesn't all go downhill now.
All in all, the fault was disappointing but these things happen. The rest of the machine is wonderful and, coming from a MacBook Pro, I'm very happy. This may change if I have to wait weeks for another dodgy trackpad though!
Got my framework 13 for a year or more, very happy.
Same. Horrible experience all over.
Same here too.
Meanwhile Tuxedo sent me a replacement fan for free for my five year old laptop for free, a laptop that they didn't even sell anymore and which was well past its due date. When I had an issue of the software kind a support perdon answered with command line snippets that helped pinpoint the issue within an hour.
YMMV but son's Framework 13 AMD has been great with daily use for 2+ years, very solid. I plan/ned to buy one before RAM prices killed my enthusiasm for any computer purchases...
Getting support on a non Apple laptop is terrible. Period. Apple has its flaws, but I will never buy another laptop brand ever. I have been burnt or seen people burnt on all the brands.
Also, I hate laptops. Make workstations great again. JK, they always were.
This is disappointing.
I have a framework 13 amd and I adore it. Bad support can ruin anything though and it will absolutely break my heart if/when I experience that.
I do hope they figure out how to improve their support experience, because I'll definitely research it before I make another major purchase from them. And I really want them to be where I buy all my laptops from in the future. It's soo good.
not to be a jerk to the person who posted and I get it, people expect things to work out of the box, warranty support, etc. but after all the frustration with the first keyboard, why didn't they just order a replacement? Isn't that... like, the whole point?
Same story with the software part. Good thing it's OSS. Bad that nobody cares to even reply to PRs.
My FW16 sometimes doesn't charge with chargers <100W. Spent, I guess, half a year lazily hunting it down. Found the issue: it was missing cleanup. Stage 4 disabled charging, stage 15 or something very late failed and forgot to turn charging back on.
Sent a PR, posted on the FW forum. No answer after 20 days. I've fixed it for myself, but what the hell.
https://github.com/FrameworkComputer/EmbeddedController/pull...
I recently sent Framework some feedback about their new wireless keyboard and trackpad product because I saw them return to the mutt arrow key layout of the Framework 13, rather than the superior inverted-T layout of the Framework 16.
I thought they'd learned, just like Apple did after they tried the same thing, but they're going back to it after I thought they'd seen the light. In my opinion, that warrants feedback.
I got a redundant response with very improper grammar and lots of extra pleasantries. Which is incredibly confusing because I remember getting much more thoughtful and engaging responses from their support in the past. But something in me broke when I saw this. Just take a look:
This goes against everything I thought of Framework as a company. Maybe their hardware is still good, but this almost makes me fear that their heart is no longer in the right place. What happened?Maybe customer support has nothing to do with the rest of the company, and this is something they don't even know about. But that's already not very detail-oriented of them, so it still makes me worry all the same.
Plus, no matter how good the product is, much like TFA, if their customer support is garbage, buying from them might simply not be worth the trouble.
Nobody ever had a shit time buying a Mac. It’s just effortless. And the hardware blows all these slop providers out of the water, so the better hardware angle doesn’t even exist anymore.
It is hard to be a small manufacturer, especially with the lofty goals of Framework, let's keep that in mind before throwing too much dirt.
No.
If they have 10 different "people" to handle a single ticket and act like it's new every time, they have the staffing to handle a ticket like this. Anyone justifying a support person's refusal to read ticket history is part of the problem.
Let’s see…
On a 16 I thought for an employee, he had two full ssd corruptions. FW sent new SSDs, but they didn’t really care to diagnose the issue. Turned out to be a bad motherboard only after I refused to accept a third ssd.
On my 13, the battery dies in shutdown, constantly. Linux OS, if I don’t shutdown completely it’s dead in a day. If I shutdown completely it’s dead in three days. I have a surface pro 3 and 5 with OLD batteries that last months in shutdown.
Other units have had bad trackpads, keyboards, webcam, randomness like the keyboard light going in and out, and I had a screen die just outside of warranty.
YES, all these issues would be fixable with just one tool. The economics of replacement parts is wildly different when I look back to how much I’ve had to spend on the four frameworks we have vs the thousand non-frameworks we’ve gone through.
I want to like them.
> Q assembles it Found the problem.
I was never going to buy them once they started sponsoring the Nazi Linux distro.
I love what Framework claims to be and have always held them as one of the companies I will check out when it's time for a hardware refresh for myself, but after reading this they are 100% out of the question for me.
If there's one thing in the world I will not tolerate any more than I am literally required to, it's this absolutely intolerable type of "support" that has become the norm in this country. This whole read reminds me of trying to get help with cars, phones, digital services, apartment rental - basically any place where I have ever called in to, they all act the same. No continuity of service between agents, no actual interest in "solving the problem", a complete and utter subservience to their "script" or their ways of "trying to help" (which is a set of processes or utilities that are targeted at the 90%, not the people who have actual issues).
For anything that I have any control over purchasing, I will not subject myself to that kind of customer service. It makes my blood boil talking to these people and hearing them just repeat the same bullshit over and over without ever actually engaging with what I'm saying, or recognizing that what they are suggesting couldn't possibly help me, with an indifference (or worse, arrogance) for my situation.
If this is the type of support that Framework provides, I hope they fail. I hope every person there gets dragged down by the company's dumb-as-fuck focus on the product and not the relationship. It's always gotta be both and these libertarian-lite MBAs have to learn that one way or another.
There's a lesson here: When you run a specialty business, you need specialty support. Now, that's easier said than done, because if you take capital, your investors, who are lazy and complacent and used to easy ZIRP-era rocket ships, will shout at you to reduce your spend on support. If there's a way to outsource your support to a couple of plankton at the bottom of the Mariannas trench, and it saves a few dollars, your investors will think it's a brilliant idea. If that's what happened here, hopefully Framework's leadership has this event as ammunition to shoot down the investors and right the ship.
I've never had one of these so I find this confusing "The keyboard isn’t detected when centered, and when moved to the left it shows up as… a numpad." - in what way is the keyboard centered? How do you move it to the left? Sorry if this is obvious. The Framework laptop shown in the picture(sitting in a bin) just looks like a normal macbook, how would you move a keyboard on that?
There are five electrically-USB “slots” for the keyboard, spacers, and optional numpads/macropads/blinkenlights that Framework sells. Here’s an article from Framework’s KB going into a little more detail about positioning: https://knowledgebase.frame.work/en_us/possible-input-module...
The idea is that you could make your own, though, and to that end they’ve published specs and such: https://github.com/FrameworkComputer/InputModules
The trackpad has three i2c-only slots for repositioning.
> Repairable hardware, Linux-friendly, a company that seemed to care about the people using its products: it was an easy recommendation to make.
Why aren't you using a Lenovo again?
there's something nice about being able to buy a Mac and simply return it to Apple within 30 days for full refund even if there is no technical issues with it.
Even though I'm rooting for Framework in their battle for repairability and upgradability versus the rest of the market which is obsessed with thinness and soldering and gluing everything... I have to acknowledge he's right to say "to hell with this company" after all that BS.
We've all seen the XKCD where a magic phrase gets you booted to a real engineer who can understand technology, instead of these script-readers who lack even the most basic computer knowledge.
You'd think that as a company which exclusively markets itself to and caters to major tech enthusiasts, Framework would have some kind of formal policy to detect when the end user calling has moderate-to-heavy troubleshooting skills and handles the situation with a reasonable process, as opposed to the treatment he got, which was basically just like dealing with Tier 1 support at HP or something, where they just walk you through rebooting or restoring the software, until you give up and throw the laptop in the trash.
Especially in the end: Clearly they sent the laptop to a place where a minimum-wage lackey opened it up, plugged it in, stuck in a USB key and ran a memory test, disk test, flash all the pixels on the screen, maybe tested the ports, and tested the keyboard in a primitive tool that amounts to a text field, by typing 1234567890 and qwertyuiop. Maybe he even swept his finger across all the keys, but that forward-delete wouldn't have been detectable.
If there were notes on the case for that person to see (and if they were competent enough to understand them), thanks to those script-readers they'd have probably seen 79 email messages, each with quoted previous messages crapping up the thread, and most of them consisting of irrelevant photographs, and they never saw what the specific problem was. So they probably just noped out of 2 hours of reading that dreck and just did a basic, generic test.
It sounds like they decided to scale their support to work like the big mainstream vendors. Odd choice.
Okay so which one is the good company then? Seems like every option sucks for one reason or another.
the dream of open repairable hardware is dead
Looking at reviews of Framework laptops it seems the dream is indeed there, but it comes with tradeoffs and a pricetag.
Why do you say that?
I think the issue is simple that most people do not care. They rather buy a laptop from Apple, Dell ... run it into the ground, and then just buy a new one with a better screen and other improvements.
This results in Framework and companies like that, being more bespoke. So they do not have the volume of scale. When its a one man or small team, your support tends to be great because your talking directly to the core.
When a company like Framework grows a bit, the amount of issue tend to grow also. So they are required to get a lot of staff and the core (hardware and support) itself gets water down somewhere (often support). Aka cutting costs on those expensive humans...
Its actually hard for companies to jump past that, where they get the production volume to force cheaper prices from supplies (on the hardware side), to compensate for the increase human factor.
You notice over the years, with a lot of companies this trend. Where if they are small, great. You brag about them, their customer base grows thanks to the good word to mouth, and after a while you start to notice new names, less well informed, more bugs and issues. What used to be a great personal experience is now replaced with the venire of a large corporate structure, but not the same level of flexibility to get personal accountant managers, etc.
There is this gap that Framework falls under. And they are having a hard time passing this, with the known results. Also the entire hardware market going crazy really does not help given that they are already producing bespoke / more expensive items. They have the drag of a large company but not the advantages of a large company. And getting past this hurdle is often the difference between a Steve Jobs and ... some name you never heard from. Yea, not the best examples but that is the first name that comes to mind lol
It's not just Framework that sucks. It's 2026 and I'm convinced there aren't any good laptops any more. It seems to me that the laptop format is built to be fragile, disposable, e-waste, similar to smart phones. So that they break in a few years or need to be "upgraded" because they become slow.
I can't tell you how many laptops that have broken for me now. I have a stack of just broken laptops in my closet (that I'll definitely fix one day... yeah) All from different brands. They've broken by having terrible fan design, USB-C ports that break, internal batteries that need replacing, power surges that have fried GPUs and other assorted faults.
Yeah, I've tried ThinkPads but modern ThinkPads are now super thin crap like any other laptop and old "refurbished" ThinkPads are on their way out. Then I have my desktop and it just quietly works, year after year. It's a Dell Workstation. Case is already perfectly organised, everything you need neatly inside. Plenty of RAM and CPU, can easily be upgraded. Cooling isn't ideal but at least its easy to maintain.
When my current laptop breaks I don't know if I'll ever buy a laptop again. It's just like... how many times do I want to make the same mistake. I don't think people should have to buy new machines every few years. I also believe the same with phones. But all this tech is designed to be disposable. They want things to fail, get slow, and need upgrades every few years. It's the same shit with every brand.
Too bad it's completely LLM-written.
Buy on credit card. Charge back for shit like this.
I didn't make a post to complain back in the day because I generally support the mission of framework, but I initially ordered a framework 13 from them a few years ago. It arrived with a broken display. I spent probably 2 weeks emailing back and forth with support, re-seating display cables, formatting the machine, taking more photos and sending more emails. I had an epiphany one evening where I was bent over the open shell of the laptop with my phone out taking video. "I sent these people two thousand dollars and they sent me a machine that doesn't work, and I'm spending my evenings trying to convince them to fix it". My next email said that I wanted to take advantage of the 30 day refund period and would be sending the machine back. Suddenly support was immediately willing to send me a new display! I thought about it, and maybe that would have made everything work, but I was so fed up at that point that I said no, just give me my money back. I took that refund and immediately bought a system76 machine. Its plasticky, cheap feeling, and the fan goes crazy (although that got much better like 18 months later with the full pop_os release), but it fucking worked on day 1, and continues to work to this day.
Really the biggest thing to come out of this whole odyssey is to convince me just how good macbooks truly are, as I look over at my wife's silent behemoth of aluminum as it rips through things probably at 2x the speed while getting 3x the battery life for 1.2x more money. But I'm a fool who's still romantic about linux and supporting smaller firms and open source, so I make do. I had hoped that framework would have improved and that my experience was just early growing pains from a young company, and maybe my next machine would be from them, everyone deserves a second chance! So its pretty disappointing to see that things are still this way years later.
(Seeing https://poolp.org/ after a curious click) Man, for your own sake, remove or do something about the slop article pictures that make LinkedIn look like a bastion of taste.
Eh. I'm still buying one.
Why did you spend 3000 euros on a laptop that isn’t from Apple? I would argue that this was all your fault.
Framework's repair center ran complete diagnostics, tested two keyboards, and found that those two keyboards were working perfectly.
All these guys had to do was order a new keyboard. If they demanded a refund for the not-working keyboard they'd get one. I know, from experience having handled dozens of Framework laptops, Framework absolutely will do this.
You'd think someone offering consulting services would be a bit sharper..
The criticisms of the ticket ownership posture are helpful (depending on how accurate they actually are), I have forwarded this along to someone high up in Framework's support branch of its org chart I have a good connection with.
"found that those two keyboards were working perfectly" Except for the fact that they obviously weren't. You shouldn't have to pay for the replacement part out of pocket, that's literally the entire point of a warranty. I work leading a warranty repair team for one of the largest OEM PC manufacturers, if a customer complains about a keyboard issue that we can't reproduce, we replace the keyboard anyway. Keeping your customers happy is always more valuable than the cost of the replacement part.
If the technicians in the Framework support center say the two keyboards they tested were working perfectly, they obviously were working perfectly.
The other keyboard, the one the customer already had, was the one that was obviously not working perfectly.
_
> if a customer complains about a keyboard issue that we can't reproduce, we replace the keyboard anyway.
The obvious thing to do. Not doing this is the mistake Framework made.
_
> shouldn't have to pay for the replacement part out of pocket, that's literally the entire point of a warranty.
An in ideal world, no one should have to do anything.
From a logistical standpoint, competent people know how to make results happen. As someone operating in a business I would order a new keyboard.
Could just send the entire laptop back.
_
What I can say for sure, when I have had to make sure that developers and other users are operational, not a single person went with more than a day of downtime just because one (or even two or three) laptops had issues.
Framework is awesome. I am personally responsible for more than one dozen of Frameworks being deployed and will probably be responsible for many more.
> If the technicians in the Framework support center say the two keyboards they tested were working perfectly, they obviously were working perfectly.
Ah no, that is not "obvious". It's entirely possible that they put the keyboards into a test harness that didn't actually test the things that were reported broken (module appearing as a numpad, c key inserting a backspace), and the technicians were not trained or allowed to go outside the testing parameters.
Yeah Framework is hot trash