eInk is in fact susceptible to aging, burn-in, and wear.
It's literally a mechanical device (well, I suppose, an electrostatic/fluidic device, but still, it is not solid state...fairly large particles have to physically move/rotate in a liquid layer), one that utilizes a voltage difference of up to 40v, too.
A color iEink screen even more sensitive because now you're not just dealing with flipping particles or making them move closer or further from the surface, you're doing it with four different particles. Similar to how SLC is more durable than TLC, which is more durable than QLC, etc.
I'm kind of glad in a way that paper prices are still in effect, I think dynamic pricing will be a much more common thing once this goes away and the barrier to do it is much lower.
I think most people don't realize that the cost for e-ink on a shelf versus paper is still way in the favor of paper, as you said. And that says nothing of the technical challenge that comes with adding that many devices to either an RF or IP network and ensuring that it works with existing, sometimes decades-old pricing systems. Then there's the legal challenges for displaying one price on the shelf but ringing another at the register - with paper, a human can indicate that the price label is updated, but with e-ink, there needs to be some other confirmation of change.
The cost is not in favor of paper and hasn't been for a decade or so. These devices have been in widespread use in Asia for a long time. Best Buy went to them a few years ago, Walmart is moving to them.
The devices are often optical, with overhead IR transmitters. The fact that you don't know that shows how little you know about the market and thus should not be talking about it.
RF is also used, yes - various protocols ranging from proprietary to bluetooth LE.
Even if only one price per second can be transmitted, that's 3600 items per hour, which means that in 24 hours, 86,400 items can be re-priced. You'd need several employees working non-stop to even hope to hit that rate.
As for the legal challenges they're able to point to logs as well as information on the digital display showing when it was last updated. Also, updates are not necessarily live - they can push out updated pricing info and then activate it at a specific time or via secondary command.
Get a similar sized IPS for $250 and you can use the rest to cover electricity use for the next 20 years at US avg price. That's assuming 24/7 but you can make it turn off if no one's looking or at night. Not sure what's the use case.
I'm sure you know this and were just offering other options, but the primary reason I like e-ink is for how it looks. How it isn't bright/shiny/lit/in-your-face. It's subdued.
My book-quotes e-ink screens around the house blend in and don't look like screens really and that's exactly how I want them. I wouldn't matter if they were giving away IPS screens, I wouldn't want that all over my house.
One primary use case would be in areas with poor lighting conditions; IPS and other similar displays wind up glare-y or with poor off-axis viewing. These displays at least look like they'd hold up better in a hallway or room with a big window and mixed lighting.
It's a lot to ask for it, and it's too much for my liking... but it's certainly a feature I'd pay a little extra for.
The other would be battery operation — being able to run a device like this for 6 months or a year on battery means I don't have to route a cable up through the wall or in a cable channel, and that's kinda neat too. But again, for the price... oof!
I do want to render a dashboard and/or images and would like to have the eink style of display for it.
Sure i could use a LCD, run ith with less herz than usual and only turn on/off the backlight with a motion sensor but do you know how long i'm waiting for this type of eink display by now? years.
So make your own with an old monitor panel for a few hundred bucks?
And yeah: there is zero commercial demand for a product like this, it's about as niche as it gets while still existing. No normal person needs an e-ink display this big (because something this size is pretty much useless for anything but a digital poster, which regular TV/monitors can already do better, for cheaper), and the sizes folks do need (e.g. e-readers and passive displays) already have plenty on offer.
But, there are always individuals who want something like this. Not enough to make it a runaway commercial success, but enough to make it a boutique successful-enough-to-stick-around-for-a-while at least.
It's a 30 inch eink screen from a very small company based in the US. This isn't a million unit run from samsung, run by some EVP who buys out the entire factory's output six years in a row.
Everyone talking about the price was LCD are ignoring the fact it has a handwade wooden frame and is being marketed as a boutique, locally assembled art piece.
Sold out immediately anyway, I don't think there's much customer pressure driving down prices for these when they make like 400 and sell them to the richest people they can find.
For about same price you can get a Steam Fram- oh wait you can't, Valve also only made 400 of them lmao.
Since he deleted his blog, and scrubbed it all from wayback, here's an archive of some of the problematic things Ryan has written: https://thewritingsofryankculp.pages.dev/
What's the deal with e-paper and people being bad at have opinions? I personally got the Daylight Computer day one of pre-orders being open. Now they've gone anti-vax. I was about to order this device as well, but then I saw this. I still may order it, but this sucks. Funding this behavior feels ugly.
As another disappointed DC-1 owner (all the more disappointed because despite everything, I still love and use mine, too), I'm not entirely shocked that they went down the crunchy-granola-to-anti-vax rabbit hole. Looking back, their whole branding angle was always a little woowoo. I didn't think much of it, though, until after I'd already bought one and they sent out a user survey asking about my experience with the DC-1. One of the questions was whether the reduced exposure to blue light had enabled me to quit taking antidepressants(?!?).
They certainly won't get more money from me, but if/when my DC-1 ever dies (or when the apps that I need finally stop working on its ridiculously outdated version of Android) I'm not sure what I'll do to replace it. The most promising thing I've seen so far is the TCL NXTPAPER, which has an e-ink-ish mode, and it's a hell of a lot cheaper than anything comparable from Boox/reMarkable/etc.
Vaccination efficacy is an evidence-based objective fact. Alternatives to believing this fact are either delusions or lying for profit. Referring to anti-vax lies and delusions as "opinions" is far more diplomatic and respectful than those people have earned.
Interesting, how does his politics affect the product/company? Or is it more the sense that you don't want to have relationships with people who have different political beliefs?
Go read some of what he's said. He sounds like some teenager you'd encounter playing Call of Duty. Someone with that sort of temperament shouldn't be the CEO of a banana stand and should be forced out by their board.
I agree that someone who speaks immaturely might not be a good leader, and that therefore people might not want to buy things from that company. Is there evidence that his personal style negatively impacts his leadership ability, or that there's any impact on the products as a result?
I'm completely open to the possibility that it would affect the products, but here it seems like people just don't want to do business with someone that is politically unpalatable to them. That's their right, and I appreciate their making that clear here.
Assuming the people who work with him are aware of what he's said, why would it be so bad for them to work with him that the board would need to remove him from leadership?
For anyone not in the know, "Sealioning" is a term that terminally online leftists invented to justify shaming people who object to their publicly expressed bigotry.
Oh people can decide whatever they want, free association and all that. I was just wondering if there was a product-related reason or if it was just tribal. Sounds like it's just tribal, which again is fine, though not exactly laudable.
I have a use case for this. I want it. I can use it in my daily life. It's what I've been hoping for for years... But this price is crazy. I can't justify owning this at 1.2k. Maybe at 400,id even go for 500, which is a crazy amount of money for a wall display/calendar. But I'd justify the utility at that price.
I have a second-hand Samsung Frame connected to an old laptop that periodically wakes up, generates a couple dozen images daily, and then transfers them to the Frame TV via the Samsung Frame’s WebSocket API. It automatically changes the picture every 30 minutes.
The "Art Mode" setting along with its matte finish makes it non-reflective, so it just acts like a nice little gallery on my wall. It’s using older models, mainly SDXL, so a lot of the pictures can be a little goofy and its been humming along for several years at this point.
I’d love to pick up one of these TRMNL devices and do something similar but the price at $1200 (soon to be $1300) gives me pause.
Not the GP, but I did a similar thing where an eink picture frame displays AI-generated landscapes with the weather being the same as the current weather/time of day as outside.
I just like the variation and didn't need to go source a bunch of actual images of the specific weather patterns.
Thanks for this, I too have an older Frame TV in my living room. Want to explore exporting my calendar and photos to it from a home server via that API!
TRMNL is a cool product, I have the original. This new model looks exactly like what I wanted but certainly not in the budget. Now I have another option!
Honestly, I would have the same reservations. Mine's an older model, but Samsung has only become more user-hostile as time has gone on.
That being said, I was able to pretty easily connect my Samsung Frame to the LAN and then block it at the router level from making outbound requests to the internet.
Mine is an old 2022 model so its not OLED - I measured it a while ago (43") and in art mode it was drawing down around ~35-40W on average about 5-6 bucks a month when left on continuously.
Whoa, no thanks. I _love_ e-ink and as I was reading I was bracing myself for $300-400, 3-4x that doesn't work for me. I get it's large, I know that large e-ink (even b/w) are not cheap but $1.3K is too rich for my blood.
I was going to buy it as just a nice all-in-one I could flash my own firmware on but not at that price. I guess I'll keep playing with my 7" e-ink screens run by ESP32's or BTLE boards.
This is a new J curve for product pricing that ive never seen before
5x the price of the next cheapest product is incredibly steep and with how the X released, I dont have a ton of confidence for the product even though i really want to.
If this was closer to $500 it would make sense
Also the wooden frame is entirely unneccesary and seems more like a personal project more so than a positive enhancement for customers.
Make it easily frameable for all types of frames instead of requiring a handmade wooden one that likely increases production costs
I mean, that's true of like most things. People buy things so that they don't have to make them themselves. This is the fundamental premise of markets.
i could also order a 31.5 inch E Ink Spectra 6 panel
and, if i'm being really dedicated, i could head on down to the beach with a shovel, some carbon, a heat source, a quartz crucible, a uv source, a laser printer, some hobby knives, a liter of sulfuric acid, and a flagrant disrespect for the EPA
then i could grab a couple of notebooks, and bootstrap my own isa, runtime, renderer, and a couple of banks of dip switches.
> Also the wooden frame is entirely unneccesary and seems more like a personal project more so than a positive enhancement for customers.
I mean.. the product seems to be pretty focused on being an aesthetic, customizable screen and not a utilitarian tech dashboard. In which case, it absolutely needs the wood frame to "fit in" to decor.
This looks dope but at that price is just a neat accessory for the wealthy. Is there a feasible route to it being about a tenth the price, like $150? Is it just a scale thing? You can get new dell monitors around that size for $200 or less.
It seems expensive because it is niche, and niche because it is expensive. At a dramatically lower price I think loads of people would love two or three of these around the house.
E-Ink yields are supposedly low at these sizes. But they also have patents, so y’know. There are reflective/transflective LCDs, but they’re not quite the same.
I am not interested about art nor colour screen but if I could have my grafana monitoring refreshing every 10 sec that would be quite cool. They seem to have other products that are targeting this but I am confused about how the image should go from my browser to the device. You even have to pay extra for the "developer" feature that allows you to access the API (?!).
Slightly relevant but I was just researching a smaller eink-display to place in a hotel room for a client and I discovered the `ReTerminal E1001` - pretty cool if anyone is looking for smaller (7.5") hackable solution with mics and beep for $69.
I hope the prices of the larger displays come down a bit at some point and become more popular.
I’ve been using a couple of the ReTerminal displays and they’re great. I use the e1004 13” for a family calendar/schedule board. It comes framed and the battery lasts a month or two. It’s the best option I have found that’s not over a thousand dollars.
I have the color and the monochrome one and just know that updates on the color screen take almost 30 seconds of flashing the screen. You don't want one of those in your eyeline. The monochrome are done in <3s.
I have mine set up around the house to display book quotes (rotate once a day) and I quite enjoy them. Though I've been dabbling in BTLE boards instead of ESP32 (what in inside a reTerminal) for more updates and longer battery life.
I recently started playing with a reTerminal E1003, the 10.3 inch monochrome version and I've been very happy with it.
$150 not bad at all for a reasonably high resolution (1404x1872) 10 inch e-ink panel with a touch screen.
Really easy setup for writing custom firmware (I've been using PlatformIO, C and LVGL) and just really solid hardware so far.
The only downside was that it took close to 2 months to get off backorder.
While looking into the available e-ink options I took a look at TRMNL's stuff as well but it turns out the TRMNL founder is a hardcore MAGA racist misogynist and I refuse to give money to such people.
Inky Impression has been popular lately. It's ~$275 on its own though. I am making a bird frame running fugleramme[0] and to purchase all of the materials (including RaspberryPi 5, power, frame, etc.) it's about $400 total.
Looks great! Love the wood frame. Would prefer it to be in a different aspect ratio tho, this ratio just says 'screen'.. but perhaps a e.g. 5:7 panel wouldn't be that easy to find?
I'm sure it's a high quality product, but given that "hacking" a random screen is just a Claude prompt these days, I think it's a hard sale. I think most consumers don't really care about the advantages of eInk versus a cheap display.
I really dislike the muted colors, soft spoken, quiet music, product videos that seem to be everywhere, talking about how "different" they are. Showing someone hand-carving into a piece of wood, talking about "made in the USA", like some third-generation craftsman with a beard and a cap. It all feels like artisanal firewood.
https://www.youtube.com/watch?v=TBb9O-aW4zI
This would be a heck of a lot more interesting if they'd worked with Modos on the display controller instead of just putting up with eink's glacial pace of, well, everything (development, improvement, actual image refresh on the panel). There's so much possible with the multipigment screens that's yet to be unlocked with better driver hardware and software.
For a product that's designed for static images where repaint speed isn't a major consideration, there's no excuse for putting up with eink's cruddy driverware at the cost of quality. Missed opportunity for differentiation.
I think it's considered cheap in it's class. It looks like a similarly sized InkPoster is 1,700. BLOOMIN8 has a 28.5" one that's on pre-order for $2,200.
Yeah the cheapest spectra 6 31.5” product I can find that is not just the bare panel is the Samsung emdx around $950. $1200 with a nice frame and better software support is reasonable to me.
haven't seen $140 for 13.3” spectra 6, can you share a link? we do already support those models (firmware + core app + oss servers) however, and i don’t like competition.
I would buy one at $1200 if the colors look good/rich in person and if you can change for a different frame. I have a feeling I'm going to be disappointed though - most of the pictures make it look like it has a bit of a washed out appearance.
At 31.5” and 1440p resolution this display has a PPI of 94. So it’s probably best viewed from a distance. I’m waiting for my 13” version (~150 PPI) to see if it makes sense to go bigger.
In the same vein is using the word "corporate" imagining that it conveys some meaning other than the user not understanding that one person corporations are a thing.
It conveys that the presentation of a business is different than a person, if the person is at all professional and adult. The number of employees is irrelevant.
A single person still wears different clothes and speaks with different language when acting as or on behalf of a business, than when at home in their pajamas passing a bong with their friends.
A business, like anyone, can certainly decide that it wants to portray this exact crafted image intentionally (rather than as the result of being dipshits) but equally potential cutomers or vendors can percieve that image however they want and make whatever judgements and conclusions about the business operators they want from it.
Anyway the single-personhood has no bearing. You're accusing someone of something only you did.
Looked interesting, until I saw that you had to pay an extra $20 for unlocking developer mode. At the $1300 price point, nickel-and-diming me for $20 was such a completely unneeded snap in the face, that i closed the purchase tab. Good luck I guess, but i will not be a customer, out of principle.
appreciate the feedback. our perspective is we bend over backwards for the dev community. priority support, 1:1 team chats in our dev-only Discord, manual plugin reviews by hand prior to publication, etc. but if you choose to self host, unnecessary.
I think the $20 is a reasonable filter for access to the dev team's energy and time, especially given the alternative of a vastly more expensive moderation and review burden if the floodgates were left open to everyone. HN won't much like it, but that's a normal bias in our community, so don't let us sway you by emotions alone.
Cheap ereaders such as xteink were made popular partly due to the unlocked firmware and custom roms for them. I guess this is a completely different target, but I would think double about it, you just need some guy with too much time and an llm agent to make something that goes popular on YouTube/reddit (...), but for 20$ he might not even want to try it
Better option is to just provide the dev support for all devs that need something for this device and have it included in the large price. The price splitting makes sense when you have $100 device, but not for $1000+ device.
Yada yada 1.2k :(
Man how long and often do I need to get my hopes up?
You can't tell me that the company having the patent is so bad in making it cheaper and better so that the mass market would kick in?
Or is there 0 mass market for things like that?
Or is it really that expensive to make them bigger?
Lets see who wins in a few years: The price going down or my wallet
There's really not much mass market outside of e-readers already. e ink monitor sized panels are a niche of a niche.
No mass market at $400/sqft, but there might be all kinds up applications at $25/sqft like tvs.
Bit of a chicken and egg. TV panels got so cheap because of the massive volume used.
Can this eInk display drive at 30-60fps continually for months without damage?
30fps? No.
Continually for months is fine though. In fact it can passively display the same image forever without power or burn-in.
eInk is in fact susceptible to aging, burn-in, and wear.
It's literally a mechanical device (well, I suppose, an electrostatic/fluidic device, but still, it is not solid state...fairly large particles have to physically move/rotate in a liquid layer), one that utilizes a voltage difference of up to 40v, too.
A color iEink screen even more sensitive because now you're not just dealing with flipping particles or making them move closer or further from the surface, you're doing it with four different particles. Similar to how SLC is more durable than TLC, which is more durable than QLC, etc.
Seems unlikely. Commercial grade digital signage displays are better suited to that.
That is not the idea of an eInk display. It is not primarily meant for animations.
Not true. Every price tag on a shelf should be an e-ink display by now. But it's still rare since they are price prohibitive for most retailers.
There are lots of these use cases where e-ink displays would be perfect, but cannot be adopted.
I'm kind of glad in a way that paper prices are still in effect, I think dynamic pricing will be a much more common thing once this goes away and the barrier to do it is much lower.
I think most people don't realize that the cost for e-ink on a shelf versus paper is still way in the favor of paper, as you said. And that says nothing of the technical challenge that comes with adding that many devices to either an RF or IP network and ensuring that it works with existing, sometimes decades-old pricing systems. Then there's the legal challenges for displaying one price on the shelf but ringing another at the register - with paper, a human can indicate that the price label is updated, but with e-ink, there needs to be some other confirmation of change.
In some places, the calculation is clearly going in favor of E-Ink tags. I assume the lower management effort you mentioned will be a part of that.
Most Walmarts I've been to in the past year seem to have switched to all eInk displays. I'd love to see a writeup on that rollout.
The cost is not in favor of paper and hasn't been for a decade or so. These devices have been in widespread use in Asia for a long time. Best Buy went to them a few years ago, Walmart is moving to them.
The devices are often optical, with overhead IR transmitters. The fact that you don't know that shows how little you know about the market and thus should not be talking about it.
RF is also used, yes - various protocols ranging from proprietary to bluetooth LE.
Even if only one price per second can be transmitted, that's 3600 items per hour, which means that in 24 hours, 86,400 items can be re-priced. You'd need several employees working non-stop to even hope to hit that rate.
As for the legal challenges they're able to point to logs as well as information on the digital display showing when it was last updated. Also, updates are not necessarily live - they can push out updated pricing info and then activate it at a specific time or via secondary command.
In German supermarkets, they basically are everywhere. Two colored (black and red), of various sizes. The do look like paper so hardly anyone notices.
These price tags are everywhere in Scandinavian shops https://www.pricer.com/
E-ink price tags are everywhere in Canada, even at discount-type grocery stores that don't yet have other "innovations" like self check out.
> Every price tag on a shelf should be an e-ink display by now.
This is the case in multiple chains in the UK.
In Hungary, you know, the poorer corner of the EU, most major supermarkets, discount franchises carry eink price tags.
very small ones seems like the best use case, sure
Advertising?
People like bright colors for advertising and tv panels are pretty cheap now. I can't see a huge demand for eink specifically there
Get a similar sized IPS for $250 and you can use the rest to cover electricity use for the next 20 years at US avg price. That's assuming 24/7 but you can make it turn off if no one's looking or at night. Not sure what's the use case.
I'm sure you know this and were just offering other options, but the primary reason I like e-ink is for how it looks. How it isn't bright/shiny/lit/in-your-face. It's subdued.
My book-quotes e-ink screens around the house blend in and don't look like screens really and that's exactly how I want them. I wouldn't matter if they were giving away IPS screens, I wouldn't want that all over my house.
One primary use case would be in areas with poor lighting conditions; IPS and other similar displays wind up glare-y or with poor off-axis viewing. These displays at least look like they'd hold up better in a hallway or room with a big window and mixed lighting.
It's a lot to ask for it, and it's too much for my liking... but it's certainly a feature I'd pay a little extra for.
The other would be battery operation — being able to run a device like this for 6 months or a year on battery means I don't have to route a cable up through the wall or in a cable channel, and that's kinda neat too. But again, for the price... oof!
I do want to render a dashboard and/or images and would like to have the eink style of display for it.
Sure i could use a LCD, run ith with less herz than usual and only turn on/off the backlight with a motion sensor but do you know how long i'm waiting for this type of eink display by now? years.
So make your own with an old monitor panel for a few hundred bucks?
And yeah: there is zero commercial demand for a product like this, it's about as niche as it gets while still existing. No normal person needs an e-ink display this big (because something this size is pretty much useless for anything but a digital poster, which regular TV/monitors can already do better, for cheaper), and the sizes folks do need (e.g. e-readers and passive displays) already have plenty on offer.
But, there are always individuals who want something like this. Not enough to make it a runaway commercial success, but enough to make it a boutique successful-enough-to-stick-around-for-a-while at least.
It's a fairly reasonable price compared to the competition. E.g. this looks like it uses the same display but is much more expensive: https://inkposter.com/products/inkposter-affresco-31-5
It's a niche product and e-ink has a monopoly on the technology. They can basically price it how they like.
I agree it would be really nice if it was like half the price though. Hard to justify at £1k.
Seems like the other guys have partnered with companies like pocketbook and in the case of the really high end device: Pininfarina.
the other display a few hundred dollars more, but shipping is 2-10 days instead of "estimated early 2027"
> a few hundred dollars more
?? It's 1.75x the price...
It's a 30 inch eink screen from a very small company based in the US. This isn't a million unit run from samsung, run by some EVP who buys out the entire factory's output six years in a row.
Everyone talking about the price was LCD are ignoring the fact it has a handwade wooden frame and is being marketed as a boutique, locally assembled art piece.
Sold out immediately anyway, I don't think there's much customer pressure driving down prices for these when they make like 400 and sell them to the richest people they can find.
For about same price you can get a Steam Fram- oh wait you can't, Valve also only made 400 of them lmao.
I was a huge fan of Trmnl when they first launched. I even convinced my friends to buy a few.
Then the QA started to go down or the devices wouldn’t ship on time. On top of that, Ryan’s politics were a big turnoff.
I would not buy another device from this company.
Since he deleted his blog, and scrubbed it all from wayback, here's an archive of some of the problematic things Ryan has written: https://thewritingsofryankculp.pages.dev/
Also https://www.reddit.com/r/ATPfm/comments/1r70awh/why_did_marc... .
I'm glad I did not buy one of these devices.
Ah, good to know.
What's the deal with e-paper and people being bad at have opinions? I personally got the Daylight Computer day one of pre-orders being open. Now they've gone anti-vax. I was about to order this device as well, but then I saw this. I still may order it, but this sucks. Funding this behavior feels ugly.
Edit since this is being downvoted: https://casewrites.leaflet.pub/3mt5ap4xpxs2a?utm_source=blue...
This is not my blog post, but I am writing this comment on my DC-1.
As another disappointed DC-1 owner (all the more disappointed because despite everything, I still love and use mine, too), I'm not entirely shocked that they went down the crunchy-granola-to-anti-vax rabbit hole. Looking back, their whole branding angle was always a little woowoo. I didn't think much of it, though, until after I'd already bought one and they sent out a user survey asking about my experience with the DC-1. One of the questions was whether the reduced exposure to blue light had enabled me to quit taking antidepressants(?!?).
They certainly won't get more money from me, but if/when my DC-1 ever dies (or when the apps that I need finally stop working on its ridiculously outdated version of Android) I'm not sure what I'll do to replace it. The most promising thing I've seen so far is the TCL NXTPAPER, which has an e-ink-ish mode, and it's a hell of a lot cheaper than anything comparable from Boox/reMarkable/etc.
> bad opinions
"You disagree with me so you're opinions are BAD!" - Zambyte
Vaccination efficacy is an evidence-based objective fact. Alternatives to believing this fact are either delusions or lying for profit. Referring to anti-vax lies and delusions as "opinions" is far more diplomatic and respectful than those people have earned.
I literally just pre-ordered one of these things and now I have to cancel, what a loser.
i love the tags on the quotes in case you weren't sure what made them offensive
It is LLMs. They love adding as many stats/figures/numbers onto web pages as possible.
"problematic" == he doesn't agree with my politics.
You're right, "problematic" is too weak, when he thinks some of my friends shouldn't be allowed to exist. I was being polite.
He openly disrespects people calling then letter people, trannies, etc. that’s not politics. It’s a jerk.
This guy seems to have serious issues. He reads like a textbook malignant narcissist. Almost like it's a shtick.
Interesting, how does his politics affect the product/company? Or is it more the sense that you don't want to have relationships with people who have different political beliefs?
Rather depends on the political beliefs though doesn't it?.
There are people who hold views so antithetical to mine that I feel no compulsion to reward them with my money.
Go read some of what he's said. He sounds like some teenager you'd encounter playing Call of Duty. Someone with that sort of temperament shouldn't be the CEO of a banana stand and should be forced out by their board.
I agree that someone who speaks immaturely might not be a good leader, and that therefore people might not want to buy things from that company. Is there evidence that his personal style negatively impacts his leadership ability, or that there's any impact on the products as a result?
I'm completely open to the possibility that it would affect the products, but here it seems like people just don't want to do business with someone that is politically unpalatable to them. That's their right, and I appreciate their making that clear here.
Board? It is a small company with 25 people, not Apple.
Ok? My point is - someone like that shouldn't be in a position of leadership, can't imagine what its like to work with him.
Assuming the people who work with him are aware of what he's said, why would it be so bad for them to work with him that the board would need to remove him from leadership?
If by late 2026 you don’t understand that this is called sealioning and cannot be given the benefit of the doubt, I don’t know what to tell you.
For anyone not in the know, "Sealioning" is a term that terminally online leftists invented to justify shaming people who object to their publicly expressed bigotry.
Interesting, how is it unreasonable to reap what you sow?
Oh people can decide whatever they want, free association and all that. I was just wondering if there was a product-related reason or if it was just tribal. Sounds like it's just tribal, which again is fine, though not exactly laudable.
I’ve been wanting something like this for a while. $1200 is more than I’m ready to pay for it but it’s cool that this exists!
I really wish they were more affordable, they are so cool, can't wait to put a bunch of eink displays everywhere
Well it's sold out so I guess they didn't set price high enough.
False? "Only 351 of 475 left in this first batch"
I have a use case for this. I want it. I can use it in my daily life. It's what I've been hoping for for years... But this price is crazy. I can't justify owning this at 1.2k. Maybe at 400,id even go for 500, which is a crazy amount of money for a wall display/calendar. But I'd justify the utility at that price.
https://paperlesspaper.de/en.
Is a lot smaller, but the one on my wall works surprisingly well.
Seems to be EU only? Would love if they shipped to US.
What I need is the big screen. I use a whiteboard that is roughly the 30" size
I have a second-hand Samsung Frame connected to an old laptop that periodically wakes up, generates a couple dozen images daily, and then transfers them to the Frame TV via the Samsung Frame’s WebSocket API. It automatically changes the picture every 30 minutes.
The "Art Mode" setting along with its matte finish makes it non-reflective, so it just acts like a nice little gallery on my wall. It’s using older models, mainly SDXL, so a lot of the pictures can be a little goofy and its been humming along for several years at this point.
I’d love to pick up one of these TRMNL devices and do something similar but the price at $1200 (soon to be $1300) gives me pause.
https://imgpb.com/EZmRX
> generates a couple dozen images daily, and then transfers them to the Frame
I don't mean this in a rude way, but you display AI images in your home as art? Do you just like the AI images better than art?
I'm trying to understand what this actually means.
Looks like that’s the case, the blog linked in the original post describes their image generation setup.
Not the GP, but I did a similar thing where an eink picture frame displays AI-generated landscapes with the weather being the same as the current weather/time of day as outside.
I just like the variation and didn't need to go source a bunch of actual images of the specific weather patterns.
Thanks for this, I too have an older Frame TV in my living room. Want to explore exporting my calendar and photos to it from a home server via that API!
TRMNL is a cool product, I have the original. This new model looks exactly like what I wanted but certainly not in the budget. Now I have another option!
Are Samsung Frames (or similar) worth it? It's hard to justify when some spyware TV can go on a wall and be $400
Honestly, I would have the same reservations. Mine's an older model, but Samsung has only become more user-hostile as time has gone on.
That being said, I was able to pretty easily connect my Samsung Frame to the LAN and then block it at the router level from making outbound requests to the internet.
But is oled right? So it constantly sips power right?
Mine is an old 2022 model so its not OLED - I measured it a while ago (43") and in art mode it was drawing down around ~35-40W on average about 5-6 bucks a month when left on continuously.
looks awesome, thanks for sharing.
> $1,299.00
Whoa, no thanks. I _love_ e-ink and as I was reading I was bracing myself for $300-400, 3-4x that doesn't work for me. I get it's large, I know that large e-ink (even b/w) are not cheap but $1.3K is too rich for my blood.
I was going to buy it as just a nice all-in-one I could flash my own firmware on but not at that price. I guess I'll keep playing with my 7" e-ink screens run by ESP32's or BTLE boards.
This is a new J curve for product pricing that ive never seen before
5x the price of the next cheapest product is incredibly steep and with how the X released, I dont have a ton of confidence for the product even though i really want to.
If this was closer to $500 it would make sense
Also the wooden frame is entirely unneccesary and seems more like a personal project more so than a positive enhancement for customers.
Make it easily frameable for all types of frames instead of requiring a handmade wooden one that likely increases production costs
I think the wood is delightful. It's very tasteful and I generally prefer natural materials whenever possible.
I think the point is, you can do it yourself or hire a carpenter if you really care about that.
I mean, that's true of like most things. People buy things so that they don't have to make them themselves. This is the fundamental premise of markets.
i could also order a 31.5 inch E Ink Spectra 6 panel
and, if i'm being really dedicated, i could head on down to the beach with a shovel, some carbon, a heat source, a quartz crucible, a uv source, a laser printer, some hobby knives, a liter of sulfuric acid, and a flagrant disrespect for the EPA
then i could grab a couple of notebooks, and bootstrap my own isa, runtime, renderer, and a couple of banks of dip switches.
you know... if you really care about that
the wood frame is made in America, but the display itself is made in China and can be sourced from there, I believe.
waiting for some noname brands with this exact same product show up on Amazon soon
> Also the wooden frame is entirely unneccesary and seems more like a personal project more so than a positive enhancement for customers.
I mean.. the product seems to be pretty focused on being an aesthetic, customizable screen and not a utilitarian tech dashboard. In which case, it absolutely needs the wood frame to "fit in" to decor.
This looks dope but at that price is just a neat accessory for the wealthy. Is there a feasible route to it being about a tenth the price, like $150? Is it just a scale thing? You can get new dell monitors around that size for $200 or less.
It seems expensive because it is niche, and niche because it is expensive. At a dramatically lower price I think loads of people would love two or three of these around the house.
E-Ink yields are supposedly low at these sizes. But they also have patents, so y’know. There are reflective/transflective LCDs, but they’re not quite the same.
I am not interested about art nor colour screen but if I could have my grafana monitoring refreshing every 10 sec that would be quite cool. They seem to have other products that are targeting this but I am confused about how the image should go from my browser to the device. You even have to pay extra for the "developer" feature that allows you to access the API (?!).
Slightly relevant but I was just researching a smaller eink-display to place in a hotel room for a client and I discovered the `ReTerminal E1001` - pretty cool if anyone is looking for smaller (7.5") hackable solution with mics and beep for $69.
I hope the prices of the larger displays come down a bit at some point and become more popular.
Can the monochrome ones do partial screen updates, like 8x12 in half a second?
I’ve been using a couple of the ReTerminal displays and they’re great. I use the e1004 13” for a family calendar/schedule board. It comes framed and the battery lasts a month or two. It’s the best option I have found that’s not over a thousand dollars.
Looks like they have a color version too for ≈$100 (reTerminal E1002) and a larger 13.3" color display for $280 (reTerminal E1004)
I have the color and the monochrome one and just know that updates on the color screen take almost 30 seconds of flashing the screen. You don't want one of those in your eyeline. The monochrome are done in <3s.
I have mine set up around the house to display book quotes (rotate once a day) and I quite enjoy them. Though I've been dabbling in BTLE boards instead of ESP32 (what in inside a reTerminal) for more updates and longer battery life.
I recently started playing with a reTerminal E1003, the 10.3 inch monochrome version and I've been very happy with it.
$150 not bad at all for a reasonably high resolution (1404x1872) 10 inch e-ink panel with a touch screen.
Really easy setup for writing custom firmware (I've been using PlatformIO, C and LVGL) and just really solid hardware so far.
The only downside was that it took close to 2 months to get off backorder.
While looking into the available e-ink options I took a look at TRMNL's stuff as well but it turns out the TRMNL founder is a hardcore MAGA racist misogynist and I refuse to give money to such people.
Self-charging options?
https://www.kickstarter.com/projects/inkanva/inkanva
Such as:
https://www.ntu.edu.sg/news/detail/near-invisible-ultrathin-...
This is basically only usable as a picture frame for paintings and drawings and/or some text; photos don’t look too well.
Full frame updates take 20-30 seconds.
Content needs to be dithered to the six fixed colors (no gradations) at the already fairly low 93 PPI.
Contrast is something like 25:1.
It’s spectra-6, presumably. They’re the same refresh speed, resolution and contrast ratio at any size.
It’s a good display tech. Don’t expect any end product to be particularly differentiated in terms of image quality though.
I made a 13 inch version myself for about $300, battery powered, esp32
So those complaining about price, it’s not bad tbh
What screen did you use?
Waveshare https://www.waveshare.com/13.3inch-e-paper-hat-plus-e.htm
Inky Impression has been popular lately. It's ~$275 on its own though. I am making a bird frame running fugleramme[0] and to purchase all of the materials (including RaspberryPi 5, power, frame, etc.) it's about $400 total.
0: https://github.com/arnegiacomo/fugleramme
Looks great! Love the wood frame. Would prefer it to be in a different aspect ratio tho, this ratio just says 'screen'.. but perhaps a e.g. 5:7 panel wouldn't be that easy to find?
I'd personally prefer a larger frame with mat. Most nice looking art is framed this way.
This one has a mat ($1,700):
https://inkposter.com/products/inkposter-affresco-31-5
Here's the display alone, more cheaper ($650):
https://www.cdw.com/product/samsung-em32dx-emdx-series-32-cl...
I've been eyeing the TRMNL X for a while, but I heard the launch was very unreliable. Has anyone here had any experience with it?
Haven‘t tried it out yet, but isn‘t the Samsung em32dx an alternative?
What’s fps on this?
Everyone's making the same mistake here... eInk and ePaper are not necessarily the same thing. eInk is a type of ePaper. eInk is a brand.
I'm sure it's a high quality product, but given that "hacking" a random screen is just a Claude prompt these days, I think it's a hard sale. I think most consumers don't really care about the advantages of eInk versus a cheap display.
https://wesbos.com/hacking-smart-photo-frames
I really dislike the muted colors, soft spoken, quiet music, product videos that seem to be everywhere, talking about how "different" they are. Showing someone hand-carving into a piece of wood, talking about "made in the USA", like some third-generation craftsman with a beard and a cap. It all feels like artisanal firewood. https://www.youtube.com/watch?v=TBb9O-aW4zI
This would be a heck of a lot more interesting if they'd worked with Modos on the display controller instead of just putting up with eink's glacial pace of, well, everything (development, improvement, actual image refresh on the panel). There's so much possible with the multipigment screens that's yet to be unlocked with better driver hardware and software.
See https://github.com/Modos-Labs/Glider/blob/main/README.md#fas... for an old example of what they've managed to do with an old CMYW Gallery Palette panel (512 colors instead of 7), or https://www.eniacelec.com/pages/tickey for an actual recent product that's pushing 48 native colors on a spectra 6 panel.
For a product that's designed for static images where repaint speed isn't a major consideration, there's no excuse for putting up with eink's cruddy driverware at the cost of quality. Missed opportunity for differentiation.
> if they'd worked with Modos on the display controller
What do you specifically mean? Are you Modos?
> for an old example of what they've managed to do with an old CMYW Gallery Palette panel (512 colors instead of 7)
"Though to be honest I hacked the right one a bit to display 512 colors opposed to the stock 7 colors".
There's only 4 pigments, CMYK in the panel. Dithering is "512 colors"?
> eink's cruddy driverware
What do you specifically mean?
I see a few comments mentioning the price is 1.2k. But I saw $1,299 which is basically 1.3k, even more expensive!
I’m disappointed it’s missing adware and spyware.
What’s the point of an art frame if it doesn’t scan and profile your network to sell ads?
It's a bit expensive, at $1,299.
I think it's considered cheap in it's class. It looks like a similarly sized InkPoster is 1,700. BLOOMIN8 has a 28.5" one that's on pre-order for $2,200.
Yeah the cheapest spectra 6 31.5” product I can find that is not just the bare panel is the Samsung emdx around $950. $1200 with a nice frame and better software support is reasonable to me.
seems like the class is not viable for now.
Yeah, the tinkerer in me would really love to get one but even at this comparably decent price point it's... steep.
Literally 2.5-3x the cost of a similarly sized 4K monitor + handmade frame.
I know e-ink is special, but man, the target market at the current pricing must be people with >100K in the bank or something.
Hope to see some competitors pop up with a better value play.
It's actually less than I would have expected for a small batch device. Samsung's EM32DX, which uses the same type and size of panel, is ~$1500 MSRP.
yeah, idk why they don't do a smaller version, e.g. spectra6 13.3" panel retail price is around 140USD
haven't seen $140 for 13.3” spectra 6, can you share a link? we do already support those models (firmware + core app + oss servers) however, and i don’t like competition.
https://www.seeedstudio.com/13-3inch-Six-Color-eInk-ePaper-D...
That is just the raw panel, no driver circuitry, no processing unit, no wifi or bluetooth. It's not really comparable to a finished product.
Yea that would be this for $300
https://www.seeedstudio.com/reTerminal-E1004-p-6692.html
I actually ordered their 3.97" reTerminal Sticky (monochrome) for 50 bucks last week. Excited to mess with it, I've never had an ePaper anything.
Yep, that's more like it!
Disclaimer: I'm CEO of Pimoroni and we make similar products in the UK: https://shop.pimoroni.com/products/inky-impression?variant=5...
$1,199* for a bit longer ;)
"we spend our time looking at screens" invents another screen
The tl;dr should include the price. That is the one thing I click on the page looking for.
FWIW, you can get a much cheaper/smaller version here that uses the exact same display technology (Spectra 6):
https://www.seeedstudio.com/reTerminal-E1004-p-6692.html
Also, apparently Samsung's version uses the same Spectra 6 panel as well:
https://www.bhphotovideo.com/c/product/1963755-REG/samsung_e...
I would buy one at $1200 if the colors look good/rich in person and if you can change for a different frame. I have a feeling I'm going to be disappointed though - most of the pictures make it look like it has a bit of a washed out appearance.
$2,000 ! zomg, I wish. I am not this rich haha.
At 31.5” and 1440p resolution this display has a PPI of 94. So it’s probably best viewed from a distance. I’m waiting for my 13” version (~150 PPI) to see if it makes sense to go bigger.
For something hanging on a wall, I'd think a viewing distance of several feet would be entirely normal.
I hate this childish, deliberate, lower-case style even more than reading something an LLM has written. Unbelievable that this is on a corporate blog.
Completely agreed. There's a place for that style in discord messages and texts, but for proper communication it comes off as childish and insincere.
In the same vein is using the word "corporate" imagining that it conveys some meaning other than the user not understanding that one person corporations are a thing.
It conveys that the presentation of a business is different than a person, if the person is at all professional and adult. The number of employees is irrelevant.
A single person still wears different clothes and speaks with different language when acting as or on behalf of a business, than when at home in their pajamas passing a bong with their friends.
A business, like anyone, can certainly decide that it wants to portray this exact crafted image intentionally (rather than as the result of being dipshits) but equally potential cutomers or vendors can percieve that image however they want and make whatever judgements and conclusions about the business operators they want from it.
Anyway the single-personhood has no bearing. You're accusing someone of something only you did.
LLM slop in user-facing UI. "Stays on screen until another screen's time comes." :/
The promo video is also an AI slop script. It's always jarring hearing a person speak Claudish.
only wooden frame is made in the US
the display itself is made in China using Chinese technologies
Looked interesting, until I saw that you had to pay an extra $20 for unlocking developer mode. At the $1300 price point, nickel-and-diming me for $20 was such a completely unneeded snap in the face, that i closed the purchase tab. Good luck I guess, but i will not be a customer, out of principle.
appreciate the feedback. our perspective is we bend over backwards for the dev community. priority support, 1:1 team chats in our dev-only Discord, manual plugin reviews by hand prior to publication, etc. but if you choose to self host, unnecessary.
I think the $20 is a reasonable filter for access to the dev team's energy and time, especially given the alternative of a vastly more expensive moderation and review burden if the floodgates were left open to everyone. HN won't much like it, but that's a normal bias in our community, so don't let us sway you by emotions alone.
Cheap ereaders such as xteink were made popular partly due to the unlocked firmware and custom roms for them. I guess this is a completely different target, but I would think double about it, you just need some guy with too much time and an llm agent to make something that goes popular on YouTube/reddit (...), but for 20$ he might not even want to try it
100s of Xteink readers are hooked up to TRMNL. next step there is being able to sideload the ereader + dashboard binaries.
So why not a $0 "unlock anything you wish but no support, RTFM || GTFO" option?
Better option is to just provide the dev support for all devs that need something for this device and have it included in the large price. The price splitting makes sense when you have $100 device, but not for $1000+ device.
> Local hosting is also available and firmware is open source.
Yes i saw this and found this to be 100% in conflict with "pay to unlock". But when in doubt, I assume the interpretation that leaves me more screwed.
16:9 no thanks.