> It is estimated that each inspection will take six work hours and cost $510 per aircraft, putting the cost across the US fleet at over $1 million, not including the price of replacement parts.
trivial, to ensure that hundreds of people don’t die, so of course several airlines pushed back on the requirement.
> The FAA rejected these requests, saying the inspection intervals were to ensure excessive freeplay does not develop in either original or replacement parts. It is estimated that each inspection will take six work hours and cost $510 per aircraft, putting the cost across the US fleet at over $1 million, not including the price of replacement parts.
The 737-NG is relatively safe. By hull-loss accidents per million departures, it's safer than the A320ceo, less safe than the A320neo. You're thinking of the 737 MAX.
Previous generations of the 737 are among the safest jetliners ever built. The MAX will eventually end up there, too - keep in mind that aviation disasters are increasingly less common as time goes on.
This issue (wearing on the trim jackscrew and hinges) is not one that you would expect to see for many, many years. It's the kind of issue that you see on jets approaching 30 years old, and it's really hard to predict how and when this kind of thing happens.
These FAA compliance cost estimates are always hilariously nonsensical. In what world are turbine AP hours being billed at $85/hr?
> In what world are turbine AP hours being billed at $85/hr?
$54.74 for non-lead technicians [1] plus up to an $8.50/hour A&P premium [2] sure sounds like about $85/hour after benefits.
[1] https://static1.squarespace.com/static/58a881f81b631b59405f6...
[2] https://teamster.org/wp-content/uploads/2024/03/TA-plus-Appe...
No inspections. Only bribe. That's where we're heading, even if we may not quite be there yet.
> The FAA rejected these requests, saying the inspection intervals were to ensure excessive freeplay does not develop in either original or replacement parts. It is estimated that each inspection will take six work hours and cost $510 per aircraft, putting the cost across the US fleet at over $1 million, not including the price of replacement parts.
Doesn't sound like it.
this plane got too complicated for humans to steer. time for the new 737 copilot frame where pilots get replaced by ai
The 737 is one of the few remaining airliners that you can turn everything off in, and still have full manual primary flight controls.
Amazed any 737 is still allowed to fly at this point.
The 737-NG is relatively safe. By hull-loss accidents per million departures, it's safer than the A320ceo, less safe than the A320neo. You're thinking of the 737 MAX.
Previous generations of the 737 are among the safest jetliners ever built. The MAX will eventually end up there, too - keep in mind that aviation disasters are increasingly less common as time goes on.
This issue (wearing on the trim jackscrew and hinges) is not one that you would expect to see for many, many years. It's the kind of issue that you see on jets approaching 30 years old, and it's really hard to predict how and when this kind of thing happens.