I own 3 JetKVMs, of which two of them stopped working, one of which doesn't boot at all and the other that never connects to network. The third I took out of service because the keyboard wouldn't send input when it was connected for more than a couple months. I'm sure the newer hardware is better, but I'm very unhappy with my JetKVMs.
FWIW, I have two JetKVMs from the original Kickstarter campaign, and both have been in continuous use since the day I received them without a single issue. So the experience definitely varies.
I've had good experiences with mine, only thing is that wifi and ethernet claims the same IP which causes my Unifi controller to freak out and send alerts
I have two and one stopped working, but they were great and sent me a replacement motherboard and a toolkit to swap it over. Did you try reaching out to them?
It not exactly a KVM switch, which allows you to have one set of keyboard, mouse, monitor connected to multiple PCs and switch between them. This is an IP KVM, which lets you send keyboard and mouse inputs and view display output remotely over the network.
Wait, do I understand correctly that you can only boot ISOs off a microSD card that I have to pre-load? I can’t just put in a card and load ISOs over the web interface? That makes the use case of full remote control (after plugging it in for the first time, of course) kinda moot…
Otherwise, this seems to be a great product for homelab stuff :)
This is seriously impressive for something the size of a matchbox. $39 for 1080p KVM + cloud access is hard to ignore. Who else is planning to grab one?
i am not sure i would trust a two month old project "based on a three month old proof of concept" over a product that has been around for years, but it is good to know it is there
It is really hard to find on the site what kvm stands for. Guess people going there knows what it stands for but think it could be spelled out once at least.
Warning: Don't browse their documentation site, it's filled with domain-specific jargon like FPS, BIOS, LAN, HDMI and other things, and not a single one is explained first! They should clearly read "Product Websites for Dummies" again.
The worst part is that there's two different KVM concepts that are pretty different. One is to bridge keyboard/video/mouse over the network to a target computer (IP KVM), and the other one is to quickly switch keyboard/video/mouse between multiple computers (KVM switch).
What’s a decent quality IP KVM solution that’s not too expensive? We’re looking to put a dozen of mac minis in a collocation, and currently investigating solutions for remote access.
I have an ATEN KVM [1] that gets a solid "it does the job" from me. Occasionally a connected computer won't pick up the K, V, or M, and I'll have to reconnect a few times.
I use it to switch between my work laptop and my personal PC, and for this situation 4K is a must have. That, and the choice of HDMI instead of DisplayPort, and things that would keep me from getting a JetKVM.
I use Aten KVM switches too, but they are a different type of product. JetKVM is for remote KVM access, not for switching between multiple computers. Both are orthogonal to each other. You can in principle combine a JetKVM with a KVM switch (and some people are doing that, though there are some technical pitfalls).
The big “tail” on the original gives you something to build an enclosure around, and the ports are all on the face opposite the display. That shape makes it easy to 3d print a mount for a 10” rack.
This one has stuff on four out of six surfaces (display, button, card slot, ports), and the two free surfaces are at a right angle to each other instead of being on opposite sides, so this gives you little to no leeway for mounting semi-permanently without some adhesive.
Are there any good KVMs for gaming? Right now, I use a capture card for video, connect the mouse directly to the destination, and use a piece of software called Deskflow to transmit my keyboard. But Deskflow occasionally crashes, so it'd be nice to have a hardware solution (also that can be used for BIOS/etc). And Deskflow also won't work if I install SteamOS, once Nvidia works.
I looked at making a solution myself, but for some reason, simulating a USB client device in software is extremely annoying, and requires specialized hardware that is also very expensive. So at that point, why not just get a KVM...
I frequently switch between 1080p and 4K for gaming since I don't like resampling artifacts. Never found a KVM that can handle 4K properly even for productivity. The mistake can be as basic as assuming a 100% scale factor.
KVMs are for rebooting and recovering servers without needing physical access. Maybe you would have some chance with HDMI splitter connected with an EDID dummy plug and an HDMI-Ethernet capture encoder thing, and some dedicated KVM for just keyboard and mouse, but idk.
For me, I want to access my physical desktop without having to keep a physically separate monitor and keyboard than my MacBook. I have the physically separate monitor and keyboard, and I actually kept it co-located with my laptop for the longest time, but it's just more convenient to not have to swap it out with the laptop to maintain good posture, etc. (I use the laptop in bed due to chronic pain/disability)
The practical answer for right now is that I don't want software screen capture, but it also does not do any of the things I wanted to be able to do by having remote inputs directed to the hardware rather than simulated in software. Namely it requires software installation on the server, which means OS support becomes a thing, you can't use it in BIOS/firmware, etc.
Sunshine works on linux and windows, screen capture uses parts of the gpu meant to do that as result you get lower latency than separate capture and encode.
KVM is useful for when you need to be able to control earlier stuff in the boot process too, or even simple stuff like entering the password for full-disk encryption, or choosing a boot entry in GRUB, or changing BIOS settings... Many use cases for KVM and remote KVM.
The part where I want wired ethernet to that SBC, not some funky proprietary wireless chip as in ESP32. I almost found a solution, but I've been unable to get my picoprobe to properly flash and reset the board for some reason, so I haven't been able to use it for development. I'll have to troubleshoot that again sometime if I enter another bout of caring.
I don't really understand your setup, but if you throw enough money at ATEN they will be happy to give you a KVM that handles 4K @ 240Hz. Supporting high refresh rates is the main thing that would keep me from using most KVMs for gaming.
Ah, I neglected to mention that my keyboard isn't separate hardware. I'm using the built-in keyboard and display of my laptop, and would like to continue doing so. So hardware switches that depend on dumb monitors and keyboards don't work for me (and that's why I said KVM, not switch).
Most KVMs that fail at 4K get the EDID wrong. They either send their own fixed one (often maxing out at 1080p or 4K30), or they reconnect the display on every switch, so the OS thinks it's a new monitor and resets your scaling. Look for one with EDID emulation.
For high refresh 4K you also need HDMI 2.1 or DisplayPort with DSC support, and a lot of "4K" KVMs don't have it.
Also, 1080p divides evenly into 4K, so turn on integer scaling in the Nvidia or AMD settings and 1080p will look sharp instead of blurry.
I do use integer scaling. That's what makes 1080p bearable on my 4K display, and not other resolutions that don't divide evenly into 4K.
An annoying quirk is that I have to use the Nvidia control panel specifically to get Windows to send a 1080p signal as otherwise, it will just upscale 1080p to a 4K signal. It makes no fucking sense to me why that would be the default but whatever.
Can't you do the same thing in Windows' own Advanced Display Settings, by toggling the resolution in list of modes? (I might be remembering the naming wrong). That seems to work to change the "Active Signal Resolution" or whatever it is. But perhaps the Nvidia method is faster.
I agree that it's insane it works this way though.
Meh. The challenge is 4k+ at high display frequency that doesn't cost the same as a small boat. There are gazillions of KVM switches that do 1080. That's easy.
I own 3 JetKVMs, of which two of them stopped working, one of which doesn't boot at all and the other that never connects to network. The third I took out of service because the keyboard wouldn't send input when it was connected for more than a couple months. I'm sure the newer hardware is better, but I'm very unhappy with my JetKVMs.
FWIW, I have two JetKVMs from the original Kickstarter campaign, and both have been in continuous use since the day I received them without a single issue. So the experience definitely varies.
Likewise no issue, I also have the gl-inet which is nice because it supports audio but the interface is not as well designed as jetkvm
I've had good experiences with mine, only thing is that wifi and ethernet claims the same IP which causes my Unifi controller to freak out and send alerts
I have two and one stopped working, but they were great and sent me a replacement motherboard and a toolkit to swap it over. Did you try reaching out to them?
At least you got them. I'm still at the "We will send you an email to do a final shipment confirmation once ready" stage.
It may be worth noting that this is not _that_ KVM, but this one: https://en.wikipedia.org/wiki/KVM_switch
I learnt this first myself from HN, a few months ago.
It not exactly a KVM switch, which allows you to have one set of keyboard, mouse, monitor connected to multiple PCs and switch between them. This is an IP KVM, which lets you send keyboard and mouse inputs and view display output remotely over the network.
Right, I was confused when it has the wifi/ethernet port
Depending on one’s computational upbringing, it is exactly _that_ KVM.
(I agree that they should spell it out on the website.)
My first thought was “ah, this must be a JVM for Kotlin by the creators of Kotlin (Jetbrains)!”
What KVM were you thinking of, the virtualization?
Probably Kernel-based Virtual Machine, yeah.
Yes
I am amazed that there is an ESP that can handle this and with just 32MB of RAM:
https://docs.espressif.com/projects/esp-dev-kits/en/latest/e...
That board still requires an HDMI module. The pi zero will support PiKVM fine with an HDMI module too.
That was my first thought too, but it seems like they're using two of them in the wireless version, with a C5 for wifi
The only reason it had been difficult was video capture and compression. Even 32MB would be overkill if you didn't need remote screen.
looks nice but seems to be rather expensive
Wait, do I understand correctly that you can only boot ISOs off a microSD card that I have to pre-load? I can’t just put in a card and load ISOs over the web interface? That makes the use case of full remote control (after plugging it in for the first time, of course) kinda moot… Otherwise, this seems to be a great product for homelab stuff :)
PiKVM allows you to load ISOs to the onboard sd card via the web interface. It just needs to be on the local disk.
This is seriously impressive for something the size of a matchbox. $39 for 1080p KVM + cloud access is hard to ignore. Who else is planning to grab one?
16 minutes old account promoting this product, and the bio is an advertisement for an actual plumbing company.
or make one yourself: https://github.com/espkvm/espkvm
i am not sure i would trust a two month old project "based on a three month old proof of concept" over a product that has been around for years, but it is good to know it is there
It is really hard to find on the site what kvm stands for. Guess people going there knows what it stands for but think it could be spelled out once at least.
Warning: Don't browse their documentation site, it's filled with domain-specific jargon like FPS, BIOS, LAN, HDMI and other things, and not a single one is explained first! They should clearly read "Product Websites for Dummies" again.
Actually yes, why not? All the professional documentation has glossary in it, btw.
Keyboard Video Mouse... It's such a weird TLA that it's not felt to be worth explaining or remembering
Well I came here thinking this would be about https://en.wikipedia.org/wiki/Kernel-based_Virtual_Machine .
TLA ?
Three Letter Acronym
Except it’s an initialism
Three Letter Acronym
LMGTFY
The worst part is that there's two different KVM concepts that are pretty different. One is to bridge keyboard/video/mouse over the network to a target computer (IP KVM), and the other one is to quickly switch keyboard/video/mouse between multiple computers (KVM switch).
Kickstarter = never in stock. What's the point in all these PR pieces when there is no product?
Why even bother when these things (of another make) can be had for less than $20 on Chinese market. This artificial scarcity bullshit need to die.
What’s a decent quality IP KVM solution that’s not too expensive? We’re looking to put a dozen of mac minis in a collocation, and currently investigating solutions for remote access.
I've had zero problems with my Gli.Net KVMs
On a related note, I came across this USB-C KVM on pre-order the other day. It ostensibly supports Tailscale, which would be really useful.
https://sipeed.com/nanokvm-go
I have an ATEN KVM [1] that gets a solid "it does the job" from me. Occasionally a connected computer won't pick up the K, V, or M, and I'll have to reconnect a few times.
I use it to switch between my work laptop and my personal PC, and for this situation 4K is a must have. That, and the choice of HDMI instead of DisplayPort, and things that would keep me from getting a JetKVM.
[1]: https://www.aten.com/gb/en/products/kvm/desktop-kvm-switches...
I use Aten KVM switches too, but they are a different type of product. JetKVM is for remote KVM access, not for switching between multiple computers. Both are orthogonal to each other. You can in principle combine a JetKVM with a KVM switch (and some people are doing that, though there are some technical pitfalls).
The original one is shaped weirdly and hard to use in my unordered stack of machines and wires. I like the new shape here better.
I was actually thinking the exact opposite.
The big “tail” on the original gives you something to build an enclosure around, and the ports are all on the face opposite the display. That shape makes it easy to 3d print a mount for a 10” rack.
This one has stuff on four out of six surfaces (display, button, card slot, ports), and the two free surfaces are at a right angle to each other instead of being on opposite sides, so this gives you little to no leeway for mounting semi-permanently without some adhesive.
Missed marketing opportunity : Let AI Agents control any computer
Unironically, yes. Easy to connect an AI to any device that supports (adapted) USB input.
Don't even need the HDMI or video the AI will prefer serial console.
I don’t mean this ironically at all. I have a few serial to IP bridges I use to let agents help me debug stuff.
Would be curious what the power draw is (in use or idle).
LTE support?
Are there any good KVMs for gaming? Right now, I use a capture card for video, connect the mouse directly to the destination, and use a piece of software called Deskflow to transmit my keyboard. But Deskflow occasionally crashes, so it'd be nice to have a hardware solution (also that can be used for BIOS/etc). And Deskflow also won't work if I install SteamOS, once Nvidia works.
I looked at making a solution myself, but for some reason, simulating a USB client device in software is extremely annoying, and requires specialized hardware that is also very expensive. So at that point, why not just get a KVM...
I frequently switch between 1080p and 4K for gaming since I don't like resampling artifacts. Never found a KVM that can handle 4K properly even for productivity. The mistake can be as basic as assuming a 100% scale factor.
https://www.store.level1techs.com/products/kvm do some that might be suitable, they produce some of the highest end desktop-spec KVMs I know of. They're not cheap though.
KVMs are for rebooting and recovering servers without needing physical access. Maybe you would have some chance with HDMI splitter connected with an EDID dummy plug and an HDMI-Ethernet capture encoder thing, and some dedicated KVM for just keyboard and mouse, but idk.
For me, I want to access my physical desktop without having to keep a physically separate monitor and keyboard than my MacBook. I have the physically separate monitor and keyboard, and I actually kept it co-located with my laptop for the longest time, but it's just more convenient to not have to swap it out with the laptop to maintain good posture, etc. (I use the laptop in bed due to chronic pain/disability)
Why do you need to use a KVM rather than Sunshine+Moonlight? That's pretty much the gold standard for remote gaming.
The practical answer for right now is that I don't want software screen capture, but it also does not do any of the things I wanted to be able to do by having remote inputs directed to the hardware rather than simulated in software. Namely it requires software installation on the server, which means OS support becomes a thing, you can't use it in BIOS/firmware, etc.
Sunshine works on linux and windows, screen capture uses parts of the gpu meant to do that as result you get lower latency than separate capture and encode.
KVM is useful for when you need to be able to control earlier stuff in the boot process too, or even simple stuff like entering the password for full-disk encryption, or choosing a boot entry in GRUB, or changing BIOS settings... Many use cases for KVM and remote KVM.
> simulating a USB client device ... requires specialized hardware that is also very expensive
Pretty much any off-the-shelf SBC can present itself as a USB HID device like a keyboard. You can buy a very capable rp2040-based board for <$5.
What part of this equation requires expensive hardware?
The part where I want wired ethernet to that SBC, not some funky proprietary wireless chip as in ESP32. I almost found a solution, but I've been unable to get my picoprobe to properly flash and reset the board for some reason, so I haven't been able to use it for development. I'll have to troubleshoot that again sometime if I enter another bout of caring.
> The part where I want wired ethernet to that SBC,
In that case the path of least resistance becomes something like a $22 NanoPi NEO (has onboard ethernet, widely used in PiKVM setups)
Oh, you were talking about SBC, not embedded. I even echoed it, should've noticed. Whoops.
Maybe I'll look into that, wouldn't require messing around with the picoprobe. Thanks!
I don't really understand your setup, but if you throw enough money at ATEN they will be happy to give you a KVM that handles 4K @ 240Hz. Supporting high refresh rates is the main thing that would keep me from using most KVMs for gaming.
Ah, I neglected to mention that my keyboard isn't separate hardware. I'm using the built-in keyboard and display of my laptop, and would like to continue doing so. So hardware switches that depend on dumb monitors and keyboards don't work for me (and that's why I said KVM, not switch).
Most KVMs that fail at 4K get the EDID wrong. They either send their own fixed one (often maxing out at 1080p or 4K30), or they reconnect the display on every switch, so the OS thinks it's a new monitor and resets your scaling. Look for one with EDID emulation.
For high refresh 4K you also need HDMI 2.1 or DisplayPort with DSC support, and a lot of "4K" KVMs don't have it.
Also, 1080p divides evenly into 4K, so turn on integer scaling in the Nvidia or AMD settings and 1080p will look sharp instead of blurry.
I do use integer scaling. That's what makes 1080p bearable on my 4K display, and not other resolutions that don't divide evenly into 4K.
An annoying quirk is that I have to use the Nvidia control panel specifically to get Windows to send a 1080p signal as otherwise, it will just upscale 1080p to a 4K signal. It makes no fucking sense to me why that would be the default but whatever.
Can't you do the same thing in Windows' own Advanced Display Settings, by toggling the resolution in list of modes? (I might be remembering the naming wrong). That seems to work to change the "Active Signal Resolution" or whatever it is. But perhaps the Nvidia method is faster.
I agree that it's insane it works this way though.
Meh. The challenge is 4k+ at high display frequency that doesn't cost the same as a small boat. There are gazillions of KVM switches that do 1080. That's easy.
https://www.kickstarter.com/projects/zepan/nanokvm-go-worlds...
Not high frequency though, tops out at 45Hz
Well, if neither 4K or high frequency is actually a requirement, then https://jetkvm.com/blog/introducing-jetkvm-mini would maybe fit.
Why does it need AI?