I don't think people have realized it yet, but AI can do hardware too. That's what I had hoped this was about.
I had Claude design an entire 4 layer rp2040 based PCB from scratch and PCBWay build it. It worked on the first go, other than some silkscreen overlapped, which doesn't hurt anything. That was before Fable.
Then I had it design a case for the new pcb to 3d print. Also worked the first go, but with minor cosmetic issues.
People have yet to even BEGIN to appreciate what these things can do with the right harness.
Witness. I've built three small projects from idea to pilot runs with Ai. Some parts of the process I had some solid experience with, and other parts I was holding the hand of my Ai and hoping he was sober and benevolent. I often had laughing fits of glee when things worked AND I understood them. As good as Ai is at just doing stuff, it's better at explaining and teaching. The back and forth made all the projects better, cheaper, tougher, and ultimately more usable.
For circuits then can be simulated. They have a of constraints that might make the problem space a lot smaller. Maybe there are also a lot of text on what makes a good design.
I also believe most design related to a physical object have documentation justifying the choices.
While personalization is definitely the trend, I don't think people are going to build code just to personalize. A tiny few of all who bought the device could do that. A few more could flash the device with some open firmware that gives more features and personalization and most will stick with the range of the personalization provided by the vendor.
For the most people, the risks outweigh the desire for tinkering. Personalization will grow right at the vendor offering, not in the hands of customer. People don't even have the time to cook their own recipes. People have their own chores to worry about. I'm talking about bulk of the customer base, not the geeks.
I've been programming computers and tinkering with all sorts of hardware for more than 30 years. I first used FreeBSD in.....2001? and Linux not long after that. I've programmed OS code, I've grudgingly written VHDL, I've assembled a sound card for the Apple II I still have running - all this to say that I believe I'm in your tiny few.
And I'm so tired. Tired of having to debug all the things. Tired of having to pay attention to them. Tired of setting them up "just once" and then months later having to reverse engineer my own work because something failed.
So I don't. I leave nearly all my devices stock. I run Windows because I'm sick of debugging device driver issues. And I don't want personalized hardware with any electronics in it (bespoke wooden objects, those I love and make).
No, by reasonable definitions that's doable too. My phone runs an OS I chose, that I have admin access on, that runs any app I tell it to run. And, y'know, it's my property that I bought with my own money, but that's probably aside your argument.
I don't think people have realized it yet, but AI can do hardware too. That's what I had hoped this was about.
I had Claude design an entire 4 layer rp2040 based PCB from scratch and PCBWay build it. It worked on the first go, other than some silkscreen overlapped, which doesn't hurt anything. That was before Fable.
Then I had it design a case for the new pcb to 3d print. Also worked the first go, but with minor cosmetic issues.
People have yet to even BEGIN to appreciate what these things can do with the right harness.
What do you to get the case? I use build123d with Python and the results are pretty good!
Witness. I've built three small projects from idea to pilot runs with Ai. Some parts of the process I had some solid experience with, and other parts I was holding the hand of my Ai and hoping he was sober and benevolent. I often had laughing fits of glee when things worked AND I understood them. As good as Ai is at just doing stuff, it's better at explaining and teaching. The back and forth made all the projects better, cheaper, tougher, and ultimately more usable.
Im surprised by how bad LLMs are with SVGs but somehow are oke-ish with CAD and other weird files.
For circuits then can be simulated. They have a of constraints that might make the problem space a lot smaller. Maybe there are also a lot of text on what makes a good design.
I also believe most design related to a physical object have documentation justifying the choices.
What harness have you been using for EDA/CAD stuff?
While personalization is definitely the trend, I don't think people are going to build code just to personalize. A tiny few of all who bought the device could do that. A few more could flash the device with some open firmware that gives more features and personalization and most will stick with the range of the personalization provided by the vendor.
For the most people, the risks outweigh the desire for tinkering. Personalization will grow right at the vendor offering, not in the hands of customer. People don't even have the time to cook their own recipes. People have their own chores to worry about. I'm talking about bulk of the customer base, not the geeks.
I'd include the geeks in that.
I've been programming computers and tinkering with all sorts of hardware for more than 30 years. I first used FreeBSD in.....2001? and Linux not long after that. I've programmed OS code, I've grudgingly written VHDL, I've assembled a sound card for the Apple II I still have running - all this to say that I believe I'm in your tiny few.
And I'm so tired. Tired of having to debug all the things. Tired of having to pay attention to them. Tired of setting them up "just once" and then months later having to reverse engineer my own work because something failed.
So I don't. I leave nearly all my devices stock. I run Windows because I'm sick of debugging device driver issues. And I don't want personalized hardware with any electronics in it (bespoke wooden objects, those I love and make).
With hardware/computers becoming locked, thin clients and unaffordable we're already forced to customize our devices cyber punk style.
You're lucky if you're in a region where these open-hardware companies sell their wares, even though many of them will go under in the current market.
"So the interesting question isn't whether personal hardware is coming. It's who gets to write the software that runs on it."
It's not that I don't like your point of view. It's that I can't stand AI slop.
well my phone can do almost everything
anything but be owned by you
No, by reasonable definitions that's doable too. My phone runs an OS I chose, that I have admin access on, that runs any app I tell it to run. And, y'know, it's my property that I bought with my own money, but that's probably aside your argument.