I really like the look of the car, but from the title it sounds like a Mustang has been converted into an FSD Tesla ("teslafied" Mustang) - but Tesla suspension, Tesla interior... this smells like a Mustang body fitted onto a Tesla chassis ("mustangified" Tesla).
I suspect that this might be more of a "Mustang body kit" on a Tesla chassis and not retrofitting the Tesla tech into a Mustang chassis + body. Still cool, but maybe misleading.
This sort of conversion gets coverage every once in a while and it's been neat to see old frames getting chopped onto new electric drivetrains. I spoke with one of the people interviewed in this article[1] a couple years back about converting an old truck I have sitting around into an EV.
The Model 3 approach takes their unified rear axle (motor,axle,wheels) and mounts it into an existing frame. Then you just need to find a place to stuff the batteries, retrofit some high-voltage electronics, and you're off to the races. One of the drawbacks of that approach is that it changes the stance of the vehicle, but for this Mustang that doesn't seem to matter much - it still looks classic.
Other converters either go for the high end with a model S and fit the motor into a traditional drivetrain for a sleeper build, or they go for the low end and take an old forklift motor and batteries and build what is effectively a street-legal golf cart. Prices range from $5-100k depending on your level of DIY and how dangerous of a classic car you want on the other side of the process.
From the article it sounds like the inverse, they took a Tesla and stuck a classic car exterior shell on it, not transplant the electric car parts into a mustang frame. It is still kind of neat but is not the same thing to me. You don't normally upgrade a classic car by chopping out the entire frame and sticking the body panels onto a modern car.
Here's one of a fully custom Toyota 4x4 truck getting a Tesla Model 3 motor that I enjoyed. I would love to have a small electric pickup like this, but I don't want to invest $100k to get it done
Retro-electric stuff makes so little sense since it's the worst of all worlds. Part of why Teslas get decent range is the slippery body. I wince every time I see people clamoring for the VW Scout reboot. Rivian too with their 140kwh batteries just to give people that nostalgic body-on-frame SUV look with usable range.
> It’s likely the first non-Tesla vehicle to run FSD, and it achieves 258 Wh/mi — roughly matching the efficiency of an actual Model 3.
This claim is implausible, right? The Mustang is unambiguously less aerodynamic than the Model 3; there's no way it is achieving similar efficiency, especially at highway speeds.
A lot of people use Leaf batteries/powertrains for this type of conversion. Probably would be cheaper than using Tesla parts if you don't need as much range.
That's really cool, though I confess I would have preferred the interior to have been more Mustang and less Model 3. Just a quibble, though, the effort is fantastic.
Whatever happened to the electric delorean reboot?
EDIT: at one point whoever owned the name also owned a warehouse of spare parts and was going to produce an electric retrofit kit for the old vehicle, and hinting at manufacturing new ones a la retromod. Whoever owns the name now just has concept rendering on their site and a Solana token, so, little more than a meme coin now :(
I've been waiting for someone to do something like this as long as I've known electric cars to be a thing. I hope they just start making them like this.
Neat. I would have preferred the original interior over Tesla's, but I guess it would then just be an electric conversion and not a "Tesla" conversion with "FSD".
That would be a pretty shortsighted move from a PR standpoint. Nobody is going to blame a restomod FSD wreck on Tesla. But turning off FSD remotely just reminds everyone that Tesla can and will take control of your car.
I know this is not the way the industry or regulations work, but I wish electric car platforms let you pick body styles without waiting for a whole model to come out. I'd love an electric Suzuki Jimny body, and could care less about the driving platform.
You are entitled to your opinion, obviously, as is anyone else. Restomods have been around since forever, and this is hardly the first EV conversion (almost certainly not the first classic Mustang EV restomod either).
Personally I think it's pretty damn cool. But I have always been a Mustang fan, and I know that this era of Mustang is not especially collectable. They made quite a large number of them and plenty are still running.
To be fair though, this is beyond typical restomod territory. This isn’t an LS swap with modern wheels and suspension. This most certainly changes the spirit of the car.
> It demonstrates that Tesla’s hardware and software stack is more portable than the company’s licensing struggles would suggest.
Unless I missed something, this is a completely unsupported claim by the article. Passion projects and retrofits are nothing at all like manufacturing.
The article claims that the whole project only cost $40,000, and then compares that to electric conversion offerings that cost $75,000 (and mentions that the global conversion market in 2024 was $5.9 billion). I think the implication is that there could be a large market for FSD conversions that goes beyond passion projects because it is not only possible but affordable.
I would be surprised however if this project only cost $40,000, when you factor in the cost of labor and maintaining a facility to do this work.
It's specifically talking about the "FSD" model under the hood being able to run on this retrofit even though the cameras don't align 100% like they originally would.
There was a shop in Dallas back about 20 years ago that did an electric conversion of a H1 Humvee. Since then there’s been lots more conversions like that and to me that is a valid recycling business.
I really like the look of the car, but from the title it sounds like a Mustang has been converted into an FSD Tesla ("teslafied" Mustang) - but Tesla suspension, Tesla interior... this smells like a Mustang body fitted onto a Tesla chassis ("mustangified" Tesla).
I suspect that this might be more of a "Mustang body kit" on a Tesla chassis and not retrofitting the Tesla tech into a Mustang chassis + body. Still cool, but maybe misleading.
This sort of conversion gets coverage every once in a while and it's been neat to see old frames getting chopped onto new electric drivetrains. I spoke with one of the people interviewed in this article[1] a couple years back about converting an old truck I have sitting around into an EV.
The Model 3 approach takes their unified rear axle (motor,axle,wheels) and mounts it into an existing frame. Then you just need to find a place to stuff the batteries, retrofit some high-voltage electronics, and you're off to the races. One of the drawbacks of that approach is that it changes the stance of the vehicle, but for this Mustang that doesn't seem to matter much - it still looks classic.
Other converters either go for the high end with a model S and fit the motor into a traditional drivetrain for a sleeper build, or they go for the low end and take an old forklift motor and batteries and build what is effectively a street-legal golf cart. Prices range from $5-100k depending on your level of DIY and how dangerous of a classic car you want on the other side of the process.
[1] https://coloradosun.com/2023/06/25/classic-cars-electric-veh...
From the article it sounds like the inverse, they took a Tesla and stuck a classic car exterior shell on it, not transplant the electric car parts into a mustang frame. It is still kind of neat but is not the same thing to me. You don't normally upgrade a classic car by chopping out the entire frame and sticking the body panels onto a modern car.
Here's one of a fully custom Toyota 4x4 truck getting a Tesla Model 3 motor that I enjoyed. I would love to have a small electric pickup like this, but I don't want to invest $100k to get it done
https://www.youtube.com/watch?v=siEhd4Z-6Ts
Retro-electric stuff makes so little sense since it's the worst of all worlds. Part of why Teslas get decent range is the slippery body. I wince every time I see people clamoring for the VW Scout reboot. Rivian too with their 140kwh batteries just to give people that nostalgic body-on-frame SUV look with usable range.
[delayed]
> It’s likely the first non-Tesla vehicle to run FSD, and it achieves 258 Wh/mi — roughly matching the efficiency of an actual Model 3.
This claim is implausible, right? The Mustang is unambiguously less aerodynamic than the Model 3; there's no way it is achieving similar efficiency, especially at highway speeds.
I’d love to do something similar to an El Camino. I don’t even need triple digit range; I’d use it as a local runabout, mostly to my art studio.
A lot of people use Leaf batteries/powertrains for this type of conversion. Probably would be cheaper than using Tesla parts if you don't need as much range.
When will I be able to get an affordable restomod for my early-2000s Jetta?
That's really cool, though I confess I would have preferred the interior to have been more Mustang and less Model 3. Just a quibble, though, the effort is fantastic.
Whatever happened to the electric delorean reboot?
EDIT: at one point whoever owned the name also owned a warehouse of spare parts and was going to produce an electric retrofit kit for the old vehicle, and hinting at manufacturing new ones a la retromod. Whoever owns the name now just has concept rendering on their site and a Solana token, so, little more than a meme coin now :(
Carson did it: https://www.youtube.com/watch?v=-eCvUGx6OkE&list=PLYIgpKT34L...
I've been waiting for someone to do something like this as long as I've known electric cars to be a thing. I hope they just start making them like this.
People have been doing Tesla powertrain swapped vehicles for a long time. Here's a Jaguar from 5 years ago: https://www.youtube.com/watch?v=DxxaHYlCuN8
Neat. I would have preferred the original interior over Tesla's, but I guess it would then just be an electric conversion and not a "Tesla" conversion with "FSD".
This is such a waste of time and money and wow it’s absolutely gorgeous and I want it
I wonder if tesla will see this and try to invalidate the VIN from using FSD
That would be a pretty shortsighted move from a PR standpoint. Nobody is going to blame a restomod FSD wreck on Tesla. But turning off FSD remotely just reminds everyone that Tesla can and will take control of your car.
I know this is not the way the industry or regulations work, but I wish electric car platforms let you pick body styles without waiting for a whole model to come out. I'd love an electric Suzuki Jimny body, and could care less about the driving platform.
As a classic car owner/hobbyist, this disgusts me. But thankfully there are at least 200k other restored/restorable 60s Mustangs out there.
Good news is that you can get a brand new 66 shell stamped in Taiwan for about 20k.
Oh, a good looking Tesla.
Nice work, but is it just me or does this take away from the car’s original spirit?
You are entitled to your opinion, obviously, as is anyone else. Restomods have been around since forever, and this is hardly the first EV conversion (almost certainly not the first classic Mustang EV restomod either).
Personally I think it's pretty damn cool. But I have always been a Mustang fan, and I know that this era of Mustang is not especially collectable. They made quite a large number of them and plenty are still running.
To be fair though, this is beyond typical restomod territory. This isn’t an LS swap with modern wheels and suspension. This most certainly changes the spirit of the car.
> It demonstrates that Tesla’s hardware and software stack is more portable than the company’s licensing struggles would suggest.
Unless I missed something, this is a completely unsupported claim by the article. Passion projects and retrofits are nothing at all like manufacturing.
The article claims that the whole project only cost $40,000, and then compares that to electric conversion offerings that cost $75,000 (and mentions that the global conversion market in 2024 was $5.9 billion). I think the implication is that there could be a large market for FSD conversions that goes beyond passion projects because it is not only possible but affordable.
I would be surprised however if this project only cost $40,000, when you factor in the cost of labor and maintaining a facility to do this work.
It's specifically talking about the "FSD" model under the hood being able to run on this retrofit even though the cameras don't align 100% like they originally would.
People have been doing these conversions forever with teslas.
Interesting, love the concept. Don't love the modern interior.
There was a shop in Dallas back about 20 years ago that did an electric conversion of a H1 Humvee. Since then there’s been lots more conversions like that and to me that is a valid recycling business.