The textbook seems nice and clear. The only nitpick i have is that it should talk more about equations of state. I understand that it may not be the focus of the text, but mentioning the current state of equations of state (SAFTs, cubics, multiparameter) would help guide readers looking on how to generate their own steam tables for their fluid of interest, even if the advice is just "go use CoolProp"
On the other hand, i really like the ilustrations on turbomachinery, helps ground the theoretical content.
Thank you! To be honest I think there is not much there because when I started 17 years ago my technical skills were much shallower, plotting a diagram to visualize/compare two models would have been quite a lot of work. But if I can be frank, at undergraduate level playing with equations of state is not expected nor a requirement. I’m happy to just say "there are others and they all have some common things". I‘d much rather the students and I spend our energy wrapping our heads around say the concept of entropy and what it allows us to do. Regardless, I appreciate your comment muchly (and shall look up CoolProp tomorrow).
I'd love to send you a few euros; but the checkout process requires both an email and a cell number. Is those strictly necessary to authorize a cc payment?
Love the price transparency, the obvious followup question is where the other ~85% of the pie goes when I buy a ~50€ paper book, if the author only earns a little under 15%?
I imagine printing will be about 2 to 5€, if it's not ultra cheap print on demand refuse. Is the rest all for publishers and Amazon dot com?
Amazon takes the lion’s share, and then the rest of the pie looks very different depending on which route you go. Big publishers print in batches and have very low print/distribution costs. I ended up on the other end of the spectrum, self-publishing with Lulu (print-on-demand, so much higher costs). I wrote an article in French on exploring the economics of textbooks, from the open-source point of view, a few years back: https://framablog.org/2022/01/20/mais-ou-sont-les-livres-uni...
Thanks, I enjoyed the article. I've bought a couple creative commons books (PDF and printed), both to have the physical artifact and to send gratitude to the author, in a form that unambiguously means something. I rarely see a pay-what-you-want option, but that would make sense to me. Buying a free PDF isn't really like buying an apple or a manufactured good, it feels more like buying music on Bandcamp. It costs nothing to copy a file, but I still want to send what I can.
Sadly I haven't been very satisfied with print on demand books. It can be serviceable for textbooks, it does make prints a lot more accessible, but the quality has been pretty disappointing for me. When I buy a POD I often end up reading the PDF instead, which seems a bit wasteful.
> I wrote an article in French on exploring the economics of textbooks, from the open-source point of view, a few years back
Thanks for that, it’s very informative. I contemplated publishing a book that way and never actually got that far into the planning phase. Do you think things have changed much since then?
When selling a product through a reseller, the markup is around 80-100%. I was horrified by this in the 80s, but soon learned that the resellers would be out of business otherwise.
The reason resellers exist is they do the marketing, warehousing, shipping, customer service, etc.
Following up with actual numbers for the project, from Lulu, in Euros:
List Price 43
Print cost 11
Distribution fees (read: Amazon, 50% of selling price): 21.5
Lulu share of profit : 2
Rest to author: 8,5
Because of the different prices on different locales in different currencies the actual share I receive averages 7€ (gross revenue before income tax, although in my case the yearly income is too small to trigger it where I live).
For books sold directly on Lulu
List price 43
Print cost 11
Lulu share of profit: 6.5
Rest to author: 25.5
The mindset should not be "this is all that’s left for me", however: a book is many things at once and for better or for worse, Amazon creates a big part of it. Kevin kelly has some excellent advice at https://kk.org/thetechnium/everything-i-know-about-self-publ...
A scan of contents list suggests that it is mostly about heat engines. No mention of chemistry. Chemical reactions are mentioned in passing in the text but with no detail. Also no obvious signs of much interest in conduction, convection, or radiation.
So it's fairly narrow focus, but that is not necessarily a bad thing.
Indeed! Truth be told, I think the book really is missing a chapter on refrigeration systems. I had to call it done at some point for my own sanity. Maybe someone will jump in and add one someday!
Thanks! I think most of the weight comes from the PNG diagrams, but I don’t actually know: I’ll put it on my to-do list to investigate, maybe there are some easy wins here.
Probably the main thing you could look at is what pixel density you want in your images.
For example, there's a 1 megabyte image of a tanker trailer that is displayed at about 1.5 x 3 inches, you could get rid of 3/4 of those pixels (going from ~400 ppi to ~200 ppi) and not really change the quality of the image for a casual reader.
I would bet that you can find used calculus textbooks quite easily.
I did chemical engineering long ago (how long? Computerized process control was just being introduced into the curriculum, and we learned to program in Fortran). I did several calculus courses, but it was always just a matter of memorizing techniques.
Much later, I came across Calculus Made Easy on Project Gutenberg, a textbook from 1914 that actually helped me to understand why calculus works, instead of just treating it like magic.
Calculus hasn't changed a whole lot. There are probably better books for learning than I used in the 1970s, but I have to believe that you can find pretty decent older calculus texts for not a lot.
Hello,
The textbook seems nice and clear. The only nitpick i have is that it should talk more about equations of state. I understand that it may not be the focus of the text, but mentioning the current state of equations of state (SAFTs, cubics, multiparameter) would help guide readers looking on how to generate their own steam tables for their fluid of interest, even if the advice is just "go use CoolProp"
On the other hand, i really like the ilustrations on turbomachinery, helps ground the theoretical content.
Thank you! To be honest I think there is not much there because when I started 17 years ago my technical skills were much shallower, plotting a diagram to visualize/compare two models would have been quite a lot of work. But if I can be frank, at undergraduate level playing with equations of state is not expected nor a requirement. I’m happy to just say "there are others and they all have some common things". I‘d much rather the students and I spend our energy wrapping our heads around say the concept of entropy and what it allows us to do. Regardless, I appreciate your comment muchly (and shall look up CoolProp tomorrow).
Author here. Feel free to send questions of any kind.
I'd love to send you a few euros; but the checkout process requires both an email and a cell number. Is those strictly necessary to authorize a cc payment?
Love the price transparency, the obvious followup question is where the other ~85% of the pie goes when I buy a ~50€ paper book, if the author only earns a little under 15%?
I imagine printing will be about 2 to 5€, if it's not ultra cheap print on demand refuse. Is the rest all for publishers and Amazon dot com?
Amazon takes the lion’s share, and then the rest of the pie looks very different depending on which route you go. Big publishers print in batches and have very low print/distribution costs. I ended up on the other end of the spectrum, self-publishing with Lulu (print-on-demand, so much higher costs). I wrote an article in French on exploring the economics of textbooks, from the open-source point of view, a few years back: https://framablog.org/2022/01/20/mais-ou-sont-les-livres-uni...
Thanks, I enjoyed the article. I've bought a couple creative commons books (PDF and printed), both to have the physical artifact and to send gratitude to the author, in a form that unambiguously means something. I rarely see a pay-what-you-want option, but that would make sense to me. Buying a free PDF isn't really like buying an apple or a manufactured good, it feels more like buying music on Bandcamp. It costs nothing to copy a file, but I still want to send what I can.
Sadly I haven't been very satisfied with print on demand books. It can be serviceable for textbooks, it does make prints a lot more accessible, but the quality has been pretty disappointing for me. When I buy a POD I often end up reading the PDF instead, which seems a bit wasteful.
> I wrote an article in French on exploring the economics of textbooks, from the open-source point of view, a few years back
Thanks for that, it’s very informative. I contemplated publishing a book that way and never actually got that far into the planning phase. Do you think things have changed much since then?
I have not kept a very close look on what’s going on. I would say that three things have changed since:
- tablets are everywhere in the classrooms now, so the number of places where a good PDF can do good is much bigger
- there are better workflows to get a high-quality PDF than LaTeX, so much frustration can be saved, and all that can be learned easily with AI tools
- in a sea of AI slop, all the humans are desperate for a One Good Resource they can trust
Go for it!!!!
When selling a product through a reseller, the markup is around 80-100%. I was horrified by this in the 80s, but soon learned that the resellers would be out of business otherwise.
The reason resellers exist is they do the marketing, warehousing, shipping, customer service, etc.
Following up with actual numbers for the project, from Lulu, in Euros: List Price 43 Print cost 11 Distribution fees (read: Amazon, 50% of selling price): 21.5 Lulu share of profit : 2 Rest to author: 8,5
Because of the different prices on different locales in different currencies the actual share I receive averages 7€ (gross revenue before income tax, although in my case the yearly income is too small to trigger it where I live).
For books sold directly on Lulu List price 43 Print cost 11 Lulu share of profit: 6.5 Rest to author: 25.5
The mindset should not be "this is all that’s left for me", however: a book is many things at once and for better or for worse, Amazon creates a big part of it. Kevin kelly has some excellent advice at https://kk.org/thetechnium/everything-i-know-about-self-publ...
Is it chemical engineering thermodynamics or the mechanical engineering one?
I suggest clicking on the link and easily discover for yourself.
A scan of contents list suggests that it is mostly about heat engines. No mention of chemistry. Chemical reactions are mentioned in passing in the text but with no detail. Also no obvious signs of much interest in conduction, convection, or radiation.
So it's fairly narrow focus, but that is not necessarily a bad thing.
Indeed! Truth be told, I think the book really is missing a chapter on refrigeration systems. I had to call it done at some point for my own sanity. Maybe someone will jump in and add one someday!
Nice, I’ll definitely check this out. You might want to look at optimising the PDF, it’s sitting at 40MB right now.
Thanks! I think most of the weight comes from the PNG diagrams, but I don’t actually know: I’ll put it on my to-do list to investigate, maybe there are some easy wins here.
The ~750 pngs are about 15 megabytes. The 77 photographic images are 22 megabytes.
Somewhat a death of 1000 cuts.
I used https://www.xpdfreader.com/pdfimages-man.html to extract them and take a look.
Thanks for that. At first glance, it looks like that is a good place to be, regarding images. I will still investigate when I find time.
Probably the main thing you could look at is what pixel density you want in your images.
For example, there's a 1 megabyte image of a tanker trailer that is displayed at about 1.5 x 3 inches, you could get rid of 3/4 of those pixels (going from ~400 ppi to ~200 ppi) and not really change the quality of the image for a casual reader.
that’s a really good place to start, thank you!
Claude was able to optimize the hell out of one of mine, might be worth a try
Engineering books are very expensive in my country. I want to give calculus a spin. Spivak is a hundred dollars.
I would bet that you can find used calculus textbooks quite easily.
I did chemical engineering long ago (how long? Computerized process control was just being introduced into the curriculum, and we learned to program in Fortran). I did several calculus courses, but it was always just a matter of memorizing techniques.
Much later, I came across Calculus Made Easy on Project Gutenberg, a textbook from 1914 that actually helped me to understand why calculus works, instead of just treating it like magic.
https://www.gutenberg.org/files/33283/33283-pdf.pdf
Calculus hasn't changed a whole lot. There are probably better books for learning than I used in the 1970s, but I have to believe that you can find pretty decent older calculus texts for not a lot.
All textbooks are free if you know where to look