Certainly! The original [link](https://makerworld.com/en/models/488435-12-trays-hdd-enclosu...) already has information. On the back I mounted SATA connectors (SATA-to-SATA, with power). I have a 1U PSU in the enclosure, which has SATA-power cables connected to the back connectors. Then, I have two SAS to 8 SATA cable that connects to the HBA card in my server on the Mini-SAS end and to the SATA connectors on the back on the enclosure. I hope that makes sense :)
These days data center capacity is measured with wattage. What's yours? My homelab is about 650Ws as is, and should cost around 300$/mo in electricity (california premium).
Fortunately, the R740 is around 230W, and the switches, routers, and everything around seems to only take 40W. Which means I'm below 300W, and I guess we have cheaper electricity in France as I don't pay as much as you (I think less than 50€/month for the homelab)
I really liked reading about the history of your homelab.
How do you like the 3d printed rack enclosure? Is it strong enough to hold the weight and heat from the server?
I used PETG to print it, which should support the heat without problems. I also added two fans behind, so that the disks and enclosure stays cold. For now, I only have 4 drives in it, and it does not move at all and holds perfectly fine.
Just to add to this, I would personally use ABS/ASA, or a fibre variant of those, like Carbon or Glass (if you don't have an enclosed printer). PA (like PA612) is also a good option. Basically anything that can handle higher temps.
PETG starts to deform at ~75-85'c. The upper end of that should be fine, but the lower end.. certain things can get close to that temp. So if you've got good airflow, and nothing is passively getting to that temps you're probably good.
The best thing might be a design that has some core that holds the components.. print that in a higher temp filament, and print the outer shells in something a little more aesthetically pleasing.
Also.. remember to check if the filament you're using has any electrical conductivity.
Yes, I would have loved to use a 'better' material, but my printer is not enclosed and I'm not sure it can print CF filaments (I think I would need to change the hot end at least). But soon I will hopefully get my hands on a new BambuLab printer which should let me play with those materials!
Actually you can. You'd need a hardened steel nozzle and that's about it. CF/GF filaments are designed to be easier to print, even on an open printer. It's almost the main reason they're popular.
Can you share more details about how you connect the 3d rack enclosure to the 740?
Certainly! The original [link](https://makerworld.com/en/models/488435-12-trays-hdd-enclosu...) already has information. On the back I mounted SATA connectors (SATA-to-SATA, with power). I have a 1U PSU in the enclosure, which has SATA-power cables connected to the back connectors. Then, I have two SAS to 8 SATA cable that connects to the HBA card in my server on the Mini-SAS end and to the SATA connectors on the back on the enclosure. I hope that makes sense :)
Pretty nice.
These days data center capacity is measured with wattage. What's yours? My homelab is about 650Ws as is, and should cost around 300$/mo in electricity (california premium).
I was trying to sort a decent UPS, then got distracted by solar and bought a house battery.
Once that addition was complete I wanted to get power usage down.
macOS is a pretty terrible OS for a homelab, but the mini is amazing. It’s averaging about 5.5w and has an awful lot of power available.
UTM makes it more bearable and running services in Ubuntu works fine.
Fortunately, the R740 is around 230W, and the switches, routers, and everything around seems to only take 40W. Which means I'm below 300W, and I guess we have cheaper electricity in France as I don't pay as much as you (I think less than 50€/month for the homelab)
I'm seeing an average cost in CA of 30c/kWhr, which should be more like $150. Is your electricity bill really running 60c per? Ouch.
I really liked reading about the history of your homelab. How do you like the 3d printed rack enclosure? Is it strong enough to hold the weight and heat from the server?
I used PETG to print it, which should support the heat without problems. I also added two fans behind, so that the disks and enclosure stays cold. For now, I only have 4 drives in it, and it does not move at all and holds perfectly fine.
Just to add to this, I would personally use ABS/ASA, or a fibre variant of those, like Carbon or Glass (if you don't have an enclosed printer). PA (like PA612) is also a good option. Basically anything that can handle higher temps.
PETG starts to deform at ~75-85'c. The upper end of that should be fine, but the lower end.. certain things can get close to that temp. So if you've got good airflow, and nothing is passively getting to that temps you're probably good.
The best thing might be a design that has some core that holds the components.. print that in a higher temp filament, and print the outer shells in something a little more aesthetically pleasing.
Also.. remember to check if the filament you're using has any electrical conductivity.
Yes, I would have loved to use a 'better' material, but my printer is not enclosed and I'm not sure it can print CF filaments (I think I would need to change the hot end at least). But soon I will hopefully get my hands on a new BambuLab printer which should let me play with those materials!
Actually you can. You'd need a hardened steel nozzle and that's about it. CF/GF filaments are designed to be easier to print, even on an open printer. It's almost the main reason they're popular.
Amazing, from a pi to a full blown rack, my dream homelab journey.
Also, the article about you joining canonical links to the homelab instead!
Thanks for noticing that! I'll try to fix right away (of course it is not happening on my local dev environment...)
Great article. Really well written.