This is a viewfinder camera with scale focus. Rangefinders have a complex mechanism to measure distance which would be beyond the scope of this project. In early Leica cameras, the rangefinder and view finder were separate mechanisms on the same camera, and were combined in the Leica M series in the 1950s.
The biggest issue with these diy builds is that they need the mechanics to be inside the lens - which is not necessarily a bad thing, however it severely limits the lens choice for the system, and introduces additional cost (you basically need to buy a shutter with every lens). The scene has definitely improved over the years, there are a number of very interesting x-pan-like builds which have been made possible by advancements in 3d printing.
I'm looking forward to the day someone figures out how to modify a full frame shutter assembly (plenty and cheap on ebay) to work with medium format film.
If you’re interested but don’t want to make your own, a Fuji GSW690 is a great entry point. I shoot slide film exclusively, and instead of prints, put the 6x9 in an acrylic frame on a sunny windowsill.
I’m also a sucker for 35mm in medium format so you can see photo content around the glorious sprocket holes.
What a great job he did. It looks very professional, even though the numbers produced must be fairly low. I wonder how the shutter mechanism works, on most medium format cameras that's a work of art and a project in its own right.
This is a great product, and without meaning to underestimate the value of a ‘makers’ project I really wish it could be manufactured at scale with a metal body and a mount that could take a wider range of lenses.
Anyone currently interested in this breadth of formats would need to spend maybe 20 thousand dollars to buy cameras like the Hasselblad Xpan, the Plaubel Makina 67, and one of the Fujica 690 bodies.
Putting all this into one body is almost miraculous.
Lomo have recently released a nicely featured 35mm film camera[1]. I wish something like the MRF2 could also be produced in this way.
I also am a huge supporter of DIY projects. Also a huge fan of medium-format, film photography.
To that end, if I can help others try medium format film, I want to add that there are plenty of inexpensive used medium-format cameras on eBay. I have purchased perhaps a dozen over the years—none of which even approached US $1000. In case you are not DIY inclined…
(Sadly, Japan has been the best place to order used camera gear but that has become cost prohibitive now for this American.)
Searching just now on eBay for "Yaschica TLR Mint" shows a number of cameras around $300 that are probably excellent (surprise, most are from Japan).
Can't afford a Hasselblad? Try "Bronica Mint" on eBay. Looks like $500 will get you in the game.
Mamiya cameras are built like tanks (and weigh as much). You could do a lot worse: "Mamiya Mint" is going to get you a few great models around $400 or so.
All of these were (are) considered damn fine film cameras.
(Mamiya tend to have interchangeable lenses, as does the Bronica. There are some Wide/Tele adapters for the Yashica, but generally you use them as-is. Most of these cameras are completely manual in operation—the more sought after Yashica though have some light-metering capabilities.)
(The Yashica and some of the Mamiya are TLR, twin-lens reflex—more or less equivalent to a rangefinder? The Bronica and some Mamiya you view through the lens 'TTL'.)
I inherited a few Mamiyas with broken shutter release, and unfortunately have not been able to find a shop willing to repair: they specifically said “we won’t touch Mamiyas”
I agree with you, but my point was aimed at people who might think that even a couple of thousand dollars would be too much to spend on a film camera, whereas used Xpans (with an unknown electronic lifespan) are commonly selling for in excess of $7k.
Otherwise I fully agree that buying old film cameras is still both the most practical and most fun way to get into the hobby.
My Xpan is now over 25 years old, and I've been doing stuff like this with it for over a decade: https://www.youtube.com/watch?v=SIy2_IpEw8c # electronics are still holding strong... for now. They tend to have more mechanical problems than electrical problems in my experience. But yes, I certainly wouldn't spend anything like what they are going for these days.
Albert (the subject of the original article here) is a former colleague and I recently visited him at home where he showed me his studio and the cameras he'd been creating. All very cool stuff.
I see Fuji GW690 bodies with a 90mm lens on various sites like keh in the $1200 range.
I have a Hasselblad 500 series camera from the 1980's that my father bought at a pawn shop near a military base. In the early 2000's professionals were dumping tons of medium format gear as they switched to digital cameras so he got a wide and telephoto lens. The problem is I never use them. They are big, heavy, klunky, and slow to operate. I've never liked print film. I used to be able to get 2 hour development of E-6 slide film but now I have to mail it off and wait over a week so I don't bother. I look at digital backs but most of them are for studio setups.
Making China imports expensive and cumbersome makes these builds difficult in my opinion. It is most certainly not really $300 if you have good connections, second the admin and tolls can make you spend enormous amount of time and money.
You are correct, and I agree. My point is that there several things like this that I refrain from completing because they become too cumbersum and expensive to build in small batches.
Very very cool. I've been thinking about doing something like that before, but didn't really have the time or skills. Awesome someone went through with it.
This is a viewfinder camera with scale focus. Rangefinders have a complex mechanism to measure distance which would be beyond the scope of this project. In early Leica cameras, the rangefinder and view finder were separate mechanisms on the same camera, and were combined in the Leica M series in the 1950s.
Oops! Correction: It is a rangefinder but uses lidar to measure the distance rather than parallax.
The biggest issue with these diy builds is that they need the mechanics to be inside the lens - which is not necessarily a bad thing, however it severely limits the lens choice for the system, and introduces additional cost (you basically need to buy a shutter with every lens). The scene has definitely improved over the years, there are a number of very interesting x-pan-like builds which have been made possible by advancements in 3d printing.
I'm looking forward to the day someone figures out how to modify a full frame shutter assembly (plenty and cheap on ebay) to work with medium format film.
If you’re interested but don’t want to make your own, a Fuji GSW690 is a great entry point. I shoot slide film exclusively, and instead of prints, put the 6x9 in an acrylic frame on a sunny windowsill.
I’m also a sucker for 35mm in medium format so you can see photo content around the glorious sprocket holes.
What a great job he did. It looks very professional, even though the numbers produced must be fairly low. I wonder how the shutter mechanism works, on most medium format cameras that's a work of art and a project in its own right.
It uses mamiya press lenses, the focusing helicoid and shutter are in the lens.
What is the quality like for these lenses? This says the system was discontinued in the 1970s.
https://en.wikipedia.org/wiki/Mamiya_Press
I've seen a lot of Mamiya 645 and 67 systems but those were probably from the 1980's and 90's.
See "Camera Specifics" on [1], for a casual but accurate explanation.
Photography is an amazing hobby, highly recommend diving into it ^^!
1: https://photothinking.com/2021-07-03-mamiya-press-super-23-f...
This is a great product, and without meaning to underestimate the value of a ‘makers’ project I really wish it could be manufactured at scale with a metal body and a mount that could take a wider range of lenses.
Anyone currently interested in this breadth of formats would need to spend maybe 20 thousand dollars to buy cameras like the Hasselblad Xpan, the Plaubel Makina 67, and one of the Fujica 690 bodies.
Putting all this into one body is almost miraculous.
Lomo have recently released a nicely featured 35mm film camera[1]. I wish something like the MRF2 could also be produced in this way.
[1] https://shop.lomography.com/us/lomo-mc-a-35-mm-film-camera-b...
I also am a huge supporter of DIY projects. Also a huge fan of medium-format, film photography.
To that end, if I can help others try medium format film, I want to add that there are plenty of inexpensive used medium-format cameras on eBay. I have purchased perhaps a dozen over the years—none of which even approached US $1000. In case you are not DIY inclined…
(Sadly, Japan has been the best place to order used camera gear but that has become cost prohibitive now for this American.)
Searching just now on eBay for "Yaschica TLR Mint" shows a number of cameras around $300 that are probably excellent (surprise, most are from Japan).
Can't afford a Hasselblad? Try "Bronica Mint" on eBay. Looks like $500 will get you in the game.
Mamiya cameras are built like tanks (and weigh as much). You could do a lot worse: "Mamiya Mint" is going to get you a few great models around $400 or so.
All of these were (are) considered damn fine film cameras.
(Mamiya tend to have interchangeable lenses, as does the Bronica. There are some Wide/Tele adapters for the Yashica, but generally you use them as-is. Most of these cameras are completely manual in operation—the more sought after Yashica though have some light-metering capabilities.)
(The Yashica and some of the Mamiya are TLR, twin-lens reflex—more or less equivalent to a rangefinder? The Bronica and some Mamiya you view through the lens 'TTL'.)
I inherited a few Mamiyas with broken shutter release, and unfortunately have not been able to find a shop willing to repair: they specifically said “we won’t touch Mamiyas”
I agree with you, but my point was aimed at people who might think that even a couple of thousand dollars would be too much to spend on a film camera, whereas used Xpans (with an unknown electronic lifespan) are commonly selling for in excess of $7k.
Otherwise I fully agree that buying old film cameras is still both the most practical and most fun way to get into the hobby.
My Xpan is now over 25 years old, and I've been doing stuff like this with it for over a decade: https://www.youtube.com/watch?v=SIy2_IpEw8c # electronics are still holding strong... for now. They tend to have more mechanical problems than electrical problems in my experience. But yes, I certainly wouldn't spend anything like what they are going for these days.
Albert (the subject of the original article here) is a former colleague and I recently visited him at home where he showed me his studio and the cameras he'd been creating. All very cool stuff.
> one of the Fujica 690 bodies
I see Fuji GW690 bodies with a 90mm lens on various sites like keh in the $1200 range.
I have a Hasselblad 500 series camera from the 1980's that my father bought at a pawn shop near a military base. In the early 2000's professionals were dumping tons of medium format gear as they switched to digital cameras so he got a wide and telephoto lens. The problem is I never use them. They are big, heavy, klunky, and slow to operate. I've never liked print film. I used to be able to get 2 hour development of E-6 slide film but now I have to mail it off and wait over a week so I don't bother. I look at digital backs but most of them are for studio setups.
Making China imports expensive and cumbersome makes these builds difficult in my opinion. It is most certainly not really $300 if you have good connections, second the admin and tolls can make you spend enormous amount of time and money.
That's still very cheap for an interchangeable lens MF rangefinder. A Mamiya 7 will cost you around $2000 just for the body.
There's the Mamiya Press which you can get for cheap but those are very large and heavy.
You are correct, and I agree. My point is that there several things like this that I refrain from completing because they become too cumbersum and expensive to build in small batches.
Very very cool. I've been thinking about doing something like that before, but didn't really have the time or skills. Awesome someone went through with it.
"When we must, we can."